1 Answer

It is B-H curve of magnetic material, it shows retetivity,coercivity & other propert of magnetic matetial like Iron
It helps in choosing the material for designing of rotor poles
Like 0 like Dislike 0 dislike


Description : State Magneto-striction. Draw Hysteresis loop for : (i) High silicon steel (ii) Copper (iii) Soft iron (iv) Wood

Answer : Magneto-striction: It is the change in dimensions of ferro magnetic material when it is magnetized for eg. Silicon steel, iron or any ferromagnetic material.  i) Hysteresis loop for High silicon steel :  ... loop for Soft iron :  iv) Hysteresis loop for Copper and Wood : 

Description : Draw B-H curve for magnetic material and state its nature. State the significance of hysteresis loop. Also draw the hysteresis loop for hard steel and soft steel. 

Answer : B-H curve for magnetic material: The B-H curve is the graphical representation of relation between flux density (B) and applied field strength (H), with H plotted on the x-axis and B plotted on ... or crossing an air gap tends to bulge outwards the iron ring, this effect is called as Fringing .

Description : Draw Hysteresis loop for Hard steel and soft steel. Also write one application of each material.

Answer : Application of Hard steel:  Fig. (a) Shows hysteresis loop for hard steel. Such materials are used for producing permanent magnets. Such a hysteresis loop represents a large residual ... Residual flux & coercive force are less. Hence material can be used for making the electromagnets. 

Description : Explain the hysteresis loop of a magnetic material with neat diagram.

Answer : Hysteresis loop of magnetic material:  The circuit arrangement for plotting the hysteresis loop is shown in figure given below. The electromagnetic part consists of a coil wound on the iron ring ... one magnetic reversal is called hysteresis loop. Meaning of hysteresis is to lag behind.

Description : The hysteresis loop of magnetic material has an area of 5 cm2 with the scales given as 1 cm=2AT and 1 cm=50 mWb, at 50 Hz, the total hysteresis loss is  (A) 15 W (B) 20 W (C) 25 W (D) 50 W 

Discuss Now ← Prev Page Next Page →