search
person
what is eddy current ?

1 Answer

In magnetic circuits when we supply current to coil which wound on some core( of iron cast iron, ferrite ) material it produce magnetic field but there is small amount of flux which also links which core material produced small value of current in core called as eddy current this current non desirable and it produces heat and losses in magnetic circuits..for good working conditions we always try to minimize eddy current
thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : What is the difference between eddy current and hysteresis loss?

Answer : Loss occurred by magnetising and demagnetising process is called histerisis loss and the current flowed due to the magnetic field produced by the electric field applied is called eddy current losses

Description : Which of the following can reduce the Eddy current losses? A) By making the core of a stack of plates electrically insulated from each other B) By making the core of solid block C) By increasing the applied voltage  D) None of these

Answer : Which of the following can reduce the Eddy current losses? A) By making the core of a stack of plates electrically insulated from each other B) By making the core of solid block C) By increasing the applied voltage  D) None of these

Description : A ferrite core has less eddy current loss than an iron core because?

Answer : A ferrite core has less eddy current loss than an iron core because ferrites have high hysteresis.

Description : How eddy current can be minimized?

Description : How eddy current is produced in a transformer?

Description : Give two applications of each : 1) Eddy current sensor 2) Optical sensor.

Answer : Eddy current sensor : 1. Detection of non-magnetic but conductive materials. 2. Displacement sensing 3. Position sensing Optical sensor : 1. Position Detection 2. Velocity Detection 3. Acceleration Detection 4. Direction Detection

Description : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is :  (A) 256 W (B) 320 W (C) 500 W (D) 625 W

Answer : The eddy current loss in a dc generator is 400 W at 40 Hz frequency of reversal and constant flux density. When frequency is increased to 50 Hz., eddy current loss is : 625 W

Description : Eddy current damping cannot be used for moving iron instrument because

Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

Answer : The disc of an instrument using eddy current damping should be of conducting and non-magnetic material.

Description : Explain hysteresis loss, eddy current loss and skin effect limitations with reference to magnetic material.

Answer : Hysteresis loss: Hysteresis loss is a loss which occurs due to the friction of magnetic domain due to the change in magnetic field in ferromagnetic material like iron. Hysteresis loss causes power loss ... loss in transformer is given by, We=Kef2Kf2Bm2watts Skin effect limitations:

Description : How eddy currents are generated?

Description : Eddy currents are induced in the pole shoes of a D.C. machine due to?

Answer : Eddy currents are induced in the pole shoes of a D.C. machine due to relative rotation between field and armature.

Description : What kills, current or voltage?

Answer : Current would kill. You can actually have thousands of bolts going through you and not even know it. Yes you probably know already voltage is current times resistance. Since your body is a resistor it would take just a small amount of current to create a very high voltage

Description : What is the relationship between power and current?

Answer : P = I2R Where P = power I = Current R = Resistance This the relationship between current and power.

Description : What happens to the resistance when the current increases?

Answer : Resistance  reduces  when  current  increases.

Description : What happens when a current flows through a wire?

Answer : Current can produce two effect one is heating effect and second is magnetic effect.

Description : What happens when you reverse the direction of the current in an electromagnet?

Answer : When  you  reverse  current  direction  in  an  electromagnet,  the magnetic  poles  will  also  change.

Description : What is the direction of an AC current?

Answer : The magnitude and direction of alternating current is changes with respect to time. So for half cycle it is positive and for next half cycle it is negative.

Description : What is the direction of the induced current?

Description : What is the direction of flow of current?

Answer : Current  flows  from  anode  to  cathode(opposite  direction  to  flow of  electrons)

Description : What is the direction of the conventional current flow?

Answer : The conventional current flow in opposite direction of flow of electrons. The electrons flow from negative terminal of battery to positive terminal of battery. And conventional current flow from positive terminal of battery to negative terminal of battery.

Description : What is the direction of flow of electric current in an electric circuit?

Answer : It  flows  from  anode  to  cathode  (direction  of   holes  flow)

Description : what is current?

Answer : Flow of free electrons

Description : Direct Current (DC) Next Topic : Alternating current (AC)

Answer : Direct Current (DC) is the unidirectional electric current. Uni meaning is one. And the flow of charge in same direction. We know that conventional current flow from positive terminal of battery to ... The magnitude of DC may constant or vary but direction do not change with respect to time.

Description : Alternating current (AC)

Answer : AC stands for Alternating Current meaning voltage or current that changes polarity or direction respectively over time. An Alternating Current (AC) is an electric current whose magnitude ... energy are known as alternators and are simpler construction than DC electromechanical generators.

Description : Does current flow through a capacitor ?

Answer : Imagine a pipe with a flexible diaphram in the middle separating two haves of the pipe. Now the pipe is filled with air. If you apply a pressure to one end the diaphram will deform ... capacitor, the effects on electrons will be recreated across the boundary. But theres no electrical connection...

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

Description : Describe the difference between direct and alternating current.

Answer : Direct current is the flow of electricity or charge in one direction..  Alternative current is the flow of charge that doesn't flow in one direction. 

Description : Explain why potential difference is necessary to produce current in a circuit.

Description : Kirchhoff's Current Law

Answer : Kirchhoff's current law

Description : Current ratio

Answer : Current ratio

Description : Current divider rule

Answer : Current divider rule

Description : Current formula

Answer : Current formula

Description : Capacitive current

Answer : Capacitive current formula

Description : How to find total impedance Z, current I and Impedance angle ?

Answer : How to find total impedance Z, current I and Impedance angle ?

Description : Why inductor current lags inductor voltage ?

Answer : Inductor is a wire wounding structure having a core material it induces emf which is opposite to the voltage supply and proportional to rate of change of current so current lags the voltage in inductor

Description : Explain lagging quantity and leading quantity, explain this concept with voltage and current waveform

Answer : When two alternating quantities attain their respective zero or peak values simultaneously, the quantities are said to be in-phase quantities. When the quantities do not attain their respective zero or ... current is leading the voltage or the voltage is said to be lagging behind the current.

Description : List out any four effects of electric current used in measuring instruments & write name of meter working on it.

Answer : Effects of Electric Current used in measuring instruments:  1. Magnetic Effect: PMMC and Moving Iron type Ammeters, voltmeter and Dynamometer type wattmeters etc.  2. Electromagnetic induction ... . Electrostatic effect: Voltmeters.  5. Hall Effect: Flux meter, Poynting vector wattmeter.

Description : State various effects of electric current and explain any one.

Answer : Effects of Electric Current:  1. Magnetic Effect: When a current is passed through a conductor, magnetic field is produced round the conductor. Due to this field when current carrying ... The rise in temperature is converted into elongation of hot wire element causes displacement of pointer. 

Description : In a series R-C circuit, with the increase in frequency, current (A) Reduces (B) Increases (C) Does not change (D) Becomes zero

Answer : In a series R-C circuit, with the increase in frequency, current Increases

Description : A 1000Ohm, 1 Watt resistor can safely pass a current of

Answer : A 1000 Ohm, 1 Watt resistor can safely pass a current of 30 mA

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

Description : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

Answer : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

Description : For a round wire, the approximate value of fusing current is given by

Answer : For a round wire, the approximate value of fusing current is given by  K√d3

Description : A current controlled voltage source is equivalent to :  (A) series voltage feed -back amplifier (B) shunt current feed -back amplifier (C) shunt voltage feed -back amplifier (D) series current feed -back amplifier

Answer : A current controlled voltage source is equivalent to : shunt voltage feed -back amplifier

Description : A network that consists of at least a voltage source or current source is called A) Active network B) Ideal network C) Sourced network D) Outsourced network

Answer : A network that consists of at least a voltage source or current source is called Active network

Description : The current flow in a battery is due to ______ A) movement of ions B) movement of protons C) movement of holes D) movement of neutrons

Answer : The current flow in a battery is due to movement of ions

Description : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is_______Vs.

Answer : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is 20 Vs

Description : When an alternating current passes through an ohmic resistance the electrical power converted into heat is?

Answer : When an alternating current passes through an ohmic resistance the electrical power converted into heat is true power.

Description : The equation of 50 Hz current sine wave having r.m.s. value of 60 A is?

Answer : (60*√2)Sin(2π*50*t)

← Prev Question Next Question →
editAsk a Question
...