# Adaptive Neuro Fuzzy Inference System (ANFIS)

Adaptive Neuro Fuzzy Inference System (ANFIS)

Adaptive Neuro Fuzzy Inference System (ANFIS)

## Related questions

Description : What is a fuzzy inference system?

Description : What is Neuro Fuzzy Systems?

Description : What is meant by fuzzy system?

Description : What is Defuzzification in fuzzy logic?

Description : What do you mean by fuzzy search?

Description : What is the membership function in fuzzy logic?

Description : What is fuzzy logic in a washing machine?

Description : What is fuzzy logic algorithms?

Description : Why fuzzy logic is used?

Description : Fuzzy Logic

Description : SOLAR SYSTEM FACTS

Answer : There are tons of asteroids in our solar system. One of them, Asteroid 243 Ida, even has it's own moon. One of the moons of Saturn, called Mimas, is heavily cratered. This creates an odd appearance ... our solar system, the sun still accounts for 99.8 percent of the total mass of our solar system.

Description : Draw a neat sketch of Gating system. State the functions of any four elements.

Answer : Gating system:  1. Sprue: The circular cross section that minimizes heat loss and turbulence is sprue, and the area of it is quantified from the choke area as well as the gating ratio.  2. ... the molten metal flow from the ingate has to be proportional to the casting area's volume.

Description : Designate a tool 8 – 10 – 6 – 6 – 5 – 10 – 0.8 signature in ASA system.

Answer : 1. Back rake angle-8 2. Side rake angle-10. 3. End relief angle-6. 4. Side relief angle-6 5. End cutting edge angle-5 6. Side cutting edge angle-10. 7. Nose radius-0.8 mm.

Description : Draw the labeled block diagram of process control system and explain each block.

Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Description : Grid distribution system

Answer : Grid distribution system:-  In this system, when the feeder or loop or ring is charged (energized) by two or more than two substations from two or more than two different generating stations then it is known as “Grid distribution system. In this system only one feeder is utilized at a time.

Description : Define: primary and secondary distribution system

Answer : i) Primary Distribution:  It is a 3-phase, 3-wire transmission line connected in between receiving substation to Distribution substation. OR It is link between receiving substation & ... substation to consumer line. OR It is link between distribution transformer substation & consumer.

Description : List classification of distributor system with their advantages each.

Answer : According to scheme of connection there are three types of distribution systems: - 1.Radial (Tree) distribution system 2.Ring mains (Loop) distribution system 3. Grid (interconnected) ... It has highest reliability to maintain supply even when there was maintenance on any one feeder.

Answer : Advantages of radial distributor system: 1. Design of layout is simple. 2. Capital cost & Erecting cost is less as there is only one feeder. 3. Time required for completion of ... maintain supply to consumers when there is maintenance on feeder. 3. Voltage fluctuations are more.

Description : Summerise the role of power system engineer.

Answer : Role of power system engineer:  i. On the planning side he or she has to make decisions on how much electricity to generate  ii. For operation of the power system he has to plan for ... for energy conservation and load management. viii. For solving the power system problems he has to update with

Description : State the losses in secondary distribution system.

Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply

Description : With neat circuit diagram explain working of emergency light system.

Answer : Emergency lighting system:  In the residential, commercial and industrial areas, the illumination system work with available AC supply. In the event of AC supply failure, partial illumination can be ... glows. In rthis way, on failure of AC supply, light is obtained from DC supply.

Description : characteristics of Hi-Fi amplifier system.

Answer : Characteristics of HI-FI amplifier: 1. Signal to noise ratio should be better than 50dB. 2. Frequency response should be flat within +-1dB. 3. Nonlinear distortion should not be more ... provided. 6. Environmental conditions should be such as to eliminate the external noise in listening room.

Description : DTH System

Answer : Outdoor unit: It consists of a receiving antenna, low noise amplifier & converter the receiving antenna is parabolic reflector with a horn as the active element. The horn can be ... fed to the normal domestic TV receiver, which after due processing reproduces picture & sound.

Description : Describe the function of MUSE system for HDTV.

Answer : Bandwidth can be reduced by MUSE (Multiple Sub -Nyquist Sampling Encoding) system MUSE stands for Multiple Sub-Nyquist sampling encoding and is an HDTV bandwidth compression schemedeveloped by ... digital Audio system is called DANCE (Digital Audio Near-Instantaneous Compression and expansion).

Description : requirements of a distribution system

Answer : Following requirements of a distribution system.  1. Layout should be simple in design. 2. It should have less initial cost 3. The distribution system should have minimum distribution ... stability of existing distribution system. 15. Time required for completion of work should be less.

Description : Why radial distribution system used for short distance ?

Answer : Because of following disadvantages radial distribution system is not used for long distance:  Since there is only one feeder to DTC feed at one point so, 1) There is no reliability ... more time for fault finding & repairing Hence radial distribution system is used for short distance.

Description : vertical deflection system and explain its operation.

Answer : The main function of the vertical deflection system , is to provide an amplified signal of proper level to derive the vertical deflection plates without any distortion. For amplification of the ... suppression, reduced nonlinear effects because none of the plates are at ground potential.

Description : Working of Simple Vapor absorption system

Answer : Working of Simple Vapor absorption system:  A Simple Vapor absorption system consists of evaporator, absorber, generator, condenser, expansion valve, pump & reducing valve. In this system ammonia ... where there is scarcity of Electricity and it is very useful at partial and full load.

Description : Draw block diagram of CNC system and state function of each block.

Answer : (i) Input Devices: These are the devices which are used to input the part program in the CNC machine. There are three commonly used input devices and these are punch tape reader, magnetic ... Unit: A monitor is used to display the programs, commands and other useful data of CNC machine.

Description : Write four advantages of FMS (Flexible Manufacturing System).

Answer : 1. Large variety of same products 2. Profitable investment. 3. Requires limited inventory. 4. Low labor cost. 5. Flexible system. 6. Speedy production. 7. Improve product quality.

Description : List and explain the components of a hydraulic system.

Answer : Components Hydraulic: Hydraulic pump- Supply fluid to the components in the system. Pressure in the system develops in reaction to the load. Hence, a pump rated for 5,000 ... mechanical components and need to be removed along with other contaminants.  Seals, fittings and connections.

Description : Explain how MEMS accelerometer is used as airbag sensor for car system.

Answer : MEMS Accelerometer is used as airbag sensor: Mechanical ignition airbags fit inside the steering wheel pad. When a collision occurs, the inertial sensor moves, setting off a ... the airbag with wiring. This is especially effective when fitting both driver- and passenger-side airbags.

Answer : Advantages of Mechatronics system:  High level of integration.  Increased functionality and better design.  More use of electronics and software instead of mechanical function.  Assumes ... Its replacement is difficult, that it is difficult to change old system to new system.

Description : Explain in brief how anti-lock braking system works

Answer : An ABS is a system on motor vehicles which prevents the wheels from locking while braking stopping safely is one of the most important functions a motor vehicle can perform. Diagram: ... to decrease the pressure on the braking circuit, effectively reducing the braking force on that wheel.

Description : Differentiate between pneumatic and hydraulic system.

Answer : Pneumatic System Hydraulic System 1 Pneumatic system uses gas for power transmission, after compression and it is used as medium for carrying out mechanical work. ... : In industrial applications, air conditioners Applications: In petrochemical industries, oil refineries.

Description : Explain the Mechatronics system with the help of block diagram and labeled the various elements.

Answer : The key elements of Mechatronics systems can be classified under following categories:  Information systems  Mechanical systems  Electrical systems  Computer systems  Sensor and actuators  ... is adjusted based on generated error and again signal is given to actuators and sensors.

Description : Describe the procedure for working of paging system.

Answer : Pager is a Simplex Communication Device. Paging Systems are communication systems that send messages to a subscriber. Message can be numeric or alphanumeric. Paging Systems are used to notify a subscriber ... message is sent by sender to his pager and the message will be displayed in the LCD.

Description : State the need of modulation in communication system.

Answer : Need of modulation:- 1. To reduce the height of antenna 2. To avoids mixing of signals 3. To increases the range of communication 4. To make multiplexing of maximum signal is possible 5. To improve the quality of reception

Description : Why solar system is preferred now a days ? Justify your answer.

Answer : Since availability of fossil fuels like coal are limited in future so there is more importance of solar power in the energy deficient because of following advantages of solar power Fuel is ... .  10. solar system technology are ideally suited to distributed applications ( Decentralized system)

Description : Draw and explain integrated duration curve used in system operation.

Answer : Diagram of integrated duration curve used in system operation: Explanation:  Integrated duration curve is obtained from load duration curve. It is drawn in between load on Y-axis in KW/MW and the X- ... a particular time of a day can also be shown on a curve which is called as mass curve.

Description : Define measurement and state the significance of electrical measurement system.

Answer : Measurement: Measurement is essentially a process in which magnitude of a quantity is determined in comparison with another similar quantity with significant units. OR The measurement of a given ... x) The measurement conforms the validity of hypothesis and also adds to its understanding.

Description : State two advantages of digital system over analog system.

Answer : 1. They are less susceptible to noise. 2. The effect of fluctuation in the characteristic of the components, ageing of components etc. is very small in digital circuits. 3. Digital circuits have capability of memory which makes them suitable for computers. 4. More accurate.

Description : Linear Algebra Problem the solution to the system of equations

Answer : Linear Algebra Problem the solution to the system of equations https://youtu.be/y_FlupirxZM

Description : Give the causes and impact and reasons of grid system fault.

Answer : Following are the causes/reasons grid system fault: 1. Major imbalance between generation and consumption i.e. demand is more than generation. 2. Low frequency, due to some faults the frequency ... of supply and causes inconvenience to people. 6. Disturb the routine work of common all people.

Description : Draw the block diagram of an embedded system and describe the hardware units of an embedded system.

Answer : OR Explanation: The embedded system consist of different components embedded into it as follows: 1) Embedded Processor 2) Power supply , reset and Oscillator circuits 3) System timers 4) ... to store data and program. Following are types of memories used in embedded system.

Description : Draw and explain schematic of PLC based automatic car parking barrier system.

Answer : Explanation: Automatic car parking system allow to park maximum numbers of car in parking zone according to size of parking zone. parking zone number of vehicle parked in parking zone is less ... available parking space then automated parking system does not allow enter next car in parking zone.

Description : Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Answer : Diagram : Control valve: - control and regulates the direction of flow and pressure etc. Air actuator: - Air cylinders and motors are used to obtain the required movements of direction flow.

Description : What are the disadvantages of Open loop control system?

Answer : Open loop control system are less reliable. In open loop control system Optimization is not possible. Open loop control system are less accurate.

Description : With a neat diagram, explain back pressure steam turbine co-generation system.

Answer : Back pressure steam turbine co-generation system: In this type steam enters the turbine chamber at High Pressure and expands to Low or Medium Pressure. Enthalpy difference is used for generating power / work. ... , the overall thermal efficiency of the system could reach as much as 90 percent.

Description : With neat diagram explain the following terms: (i) Steam turbine co-generation system (ii) Gas turbine co-generation system

Answer : (i) Steam turbine co-generation system: The two types of steam turbines most widely used are the backpressure and the extraction. Another variation of the steam turbine topping ... power. The exhaust or the extracted steam from the steam turbine provides the required thermal energy.

← Prev Question Next Question →