search
person

1 Answer

Regenerative method of braking is based on that back e.m.f. is equal to the applied voltage.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Answer : Plugging method of braking is generally used in elevators.

Answer : Shunt motors,  Series motors, Compound motors

Answer : During rheostat braking of D.C. series motors motor is run as a generator.

Description : For using regenerative breaking, the most suitable motor is :  (A) DC series motor  (B) Slip ring induction motor  (C) Squirrel cage induction motor  (D) Synchronous motor

Answer : For using regenerative breaking, the most suitable motor is : Slip ring induction motor

Description : Explain in brief how anti-lock braking system works

Answer : An ABS is a system on motor vehicles which prevents the wheels from locking while braking stopping safely is one of the most important functions a motor vehicle can perform. Diagram: ... to decrease the pressure on the braking circuit, effectively reducing the braking force on that wheel.

Answer : The braking retardation is usually in the range 10 to 15 km phps.

Answer : The main disadvantage of the Ward-Leonard control method is high initial cost, high maintenance cost, low efficiency at light loads.

Answer : For constant torque drive armature voltage control speed control method is preferred.

Description : Explain the thermal triggering method of SCR. Enlist different triggering methods of SCR.

Answer : Types of Triggering: 1) Forward voltage triggering 2) Thermal triggering (Temperature triggering) 3) Radiation triggering (Light triggering) 4) dv/dt triggering 5) Gate triggering ... generated leakage current increases. This current gets multiplied internally and thyristor is turned on. 

Description : Illustrate with neat wiring diagram a single lamp control by two point method.

Answer : Single lamp control by two point method:  This system is commonly used for stair case wiring. It consists of two way switches (the switch operates always in one of the two possible positions) the ... the person will change the position of switch S2, so that the lamp will be switched OFF'.

Description : Draw and explain vacuum impregnation method of varnishing.

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : Describe fire extinguishing method.

Answer : (i) Carbon Dioxide Extinguishing Systems  This type is the most suitable & widely recommended one for electrical fires. Carbon dioxide (CO2) extinguishers are normally Class C ... particles to expand chemically inhibiting combustion and expelling the oxygen thereby smothering the flames.

Description : Draw and explain bulk correction method for power factor & control.

Answer : Bulk correction method for power factor & control: i) Here individual starter controls the capacitors located at distribution panel. ii) Centralized compensation is employed in large industrial plants where many ... capacitor units in steps to maintain P.F. more than preset limit (0.95). 

Description : Explain energy conservation method in lighting system by using installation of separate transformer / servo stabilizer.

Answer : Energy conservation techniques by installation of separate transformer / servo stabilizer: The luminous efficiency of lamps depends upon the voltage applied across the terminals. It gives its best ... the voltage constant in that installation for giving best luminous efficiency of lamps.

Description : Merits of two wattmeter method

Answer : Advantages of Two Wattmeter Method for 3-Phase Power Measurement: 1) It is used for balanced as well as unbalanced load. 2) For the star type load, it is not necessary to ... reactive volt-amperes for balanced loads also. 7) The circuit connections are independent of load connection.

Description : Write one advantage and one disadvantage each for spring control method and gravity control method.

Answer : Advantages of Spring Control Method: 1) The spring-controlled meters may be used in any position. 2) In some instruments, springs can be used as current leads. 3) As springs are light in weight ... only. 2) Scale is non-uniform. 3) Control weights add to the weight of instrument.

Description : State any two disadvantages of one wattmeter method of measurement of 3 phase power.

Answer : State any two disadvantages of one wattmeter method of measurement of 3 phase power. Disadvantages of one wattmeter method:- 1. Only used for balanced load 2. It can not be used for ... connection then neutral point must be available 4. Delta connection must be opened to connect current coil.

Description : With neat diagram explain calibration of energy meter by direct loading method.

Answer : Calibration of Energy Meter by Direct Loading Method:  There are three methods for testing/calibration:  1. Long period dial test  2. Using rotary sub- standard meter  3. Using precision grade instruments  All ... of substandard meter in kWh  Then % error = [(D - DS)/DS] x 100

Description : Explain V- I method of measurement of medium resistance. 

Answer : In this method, use suitable source, ammeter and voltmeter and connect them as shown in the above diagram. Take reading of voltmeter and ammeter, then value of resistance = R = V/I Ω To minimise the error take 4 to 5 observation for the same resistance and take their average.

Description : Explain spring control method with neat diagram.

Answer : Spring Control Method: As shown in the figure the inner ends of the both springs are attahced to the spindle ,while outer end of upper spring is attached to the lever and outer end of ... the springs are twisted in opposite direction to the motion of pointer and produce controlling torque.

Description : List one advantage and one disadvantage of one wattmeter method. 

Answer : Advantages:  1) Only one wattmeter is used.  2) Less number of connections.  3) Cost required is less.  Disadvantages:  1) Used only for 3- Φ balanced load and not for ... be accessible for connecting the Pressure coil.  3) Delta connection must be opened to connect current coil. 

Description : List any four errors in induction type energy meter. Give method of compensation for each.

Answer : Errors in Induction Type Energy Meter with their Compensation:  1) Error due to friction: This error can be compensated by the additional shading band provided on the shunt electromagnet.  2) Phase ... error: This error can be compensated by providing a flux diverter' to the current magnet. 

Description : The self GMD method is used to evaluate

Answer : The self GMD method is used to evaluate inductance and capacitance

Description : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is (A) zero (B) 0.5 (C) between zero and 0.5 (D) between 0.5 and unity

Answer : The power consumed by a balanced 3-ph load is measured by two-wattmeter method. The meter readings are 8 kW and 4 kW. The power factor of the load is between 0.5 and unity

Description : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration C, more number of iterations and more time per iteration D. more number of iterations and less time per iteration

Answer : Compared to Gauss-Seidel method, Newton-Raphson method takes : A. less number of iterations and more time per iteration B. less number of iterations and less time per iteration ... of iterations and more time per iteration D. more number of iterations and less time per iteration

Description : The bridge method commonly used for finding mutual inductance is (A) Heaviside Campbell bridge (B) Schering bridge (C) De Sauty bridge (D) Wien bridge

Answer : The bridge method commonly used for finding mutual inductance is Heaviside Campbell bridge

Answer : Plugging braking method can bring the locomotive to dead stop.

Answer : Speed control by Ward Leonard method gives uniform speed variation in both directions.

Answer : Annual depreciation as per straight line method, is calculated by the capital cost minus the salvage value, is divided by the number of years of life.

Description : What is the bisection method?

Description : Why do we use Gauss elimination method?

Description : What is Newton Raphson Method example?

Description : Explain regenerative braking for D.C. series motor.

Answer : Schematic diagram of regenerative braking of D.C. series :-  Explanation of regenerative braking: During normal running, motors are connected in parallel with field winding in series ... For final stop mechanical braking is applied. External Resistances are connected to limit the current.

Description : In a regenerative braking, which of the following is generally true?  (a) Back e.m.f. in the motor exceeds the applied voltage (b) Back e.m.f. is less than the applied voltage ... dissipated in a resistance (d) Kinetic energy of the motor is dissipated through free wheeling diode across the motor 

Answer : In a regenerative braking, which of the following is generally true?  (a) Back e.m.f. in the motor exceeds the applied voltage (b) Back e.m.f. is less than the applied voltage ... in a resistance (d) Kinetic energy of the motor is dissipated through free wheeling diode across the motor 

Description : A DC chopper is used for regenerative braking of a separately excited DC motor. The DC supply voltage is 400V. The armature current during regenerative braking is kept constant at 300 A with negligible ripple. For a duty cycle of 60% ... to the DC supply is  (a) 78 kW (b) 58 kW (c) 38 kW (d) 48 kW

Answer : A DC chopper is used for regenerative braking of a separately excited DC motor. The DC supply voltage is 400V. The armature current during regenerative braking is kept constant at 300 A with negligible ripple. For a duty cycle of 60% the power return to the DC supply is  48 kW

Description : Regenerative braking can: (A) be used for stopping a motor (B) not be easily applied to DC series motors (C) be easily applied to DC shunt motors (D) not be used for heavy duty -cycle motors

Answer : Regenerative braking can: not be easily applied to DC series motors

Description : In the past, the method for expressing an opinion has been to frame a ____ question based on available factual evidence. A. Hypothetical B. Nested C. Challenging D. Contradictory

Answer : A. Hypothetical  

Description : Define heat exchanger. Classify heat exchangers based on geometry, direction of fluids, method of heat exchange.

Answer : 1. A heat exchanger is a device, which transfers thermal energy between two fluids at different temperatures. 2. In most common engineering applications, both fluids are in motion and the ... free or forced convection ii. Boiling or condensation iii. Radiation or combined convection radiation

Description : Which design method is based on state space approach ? A) Root Locus Method (B) Pole Placement Method (C) Frequency Response Method (D) None of the above

Description : The nodal method of circuit analysis is based on  (A) KVL and ohms law (B) KVL and KCL (C) KCL and ohms law (D) Thevenins theorem

Answer :  The nodal method of circuit analysis is based on KCL and Ohm’s law

Description :  Which braking system on the locomotives is the costliest among the following? A) Vacuum braking on diesel locomotives B) Vacuum braking on steam locomotives C) Regenerative braking on electric locomotives D) All braking systems are equally costly

Answer : Which braking system on the locomotives is the costliest among the following? A) Vacuum braking on diesel locomotives B) Vacuum braking on steam locomotives C) Regenerative braking on electric locomotives D) All braking systems are equally costly

Description : Contingency theories of leadership are based on the belief that (a) there is no single style of leadership appropriate to all situations (b) there is a single style of leadership ... the interactions between the variables involved in a leadership situation and patterns of leadership behaviour.]

Answer : (a) there is no single style of leadership appropriate to all situations 

Description : Legitimate power is based on the subordinate s perception that the leader has a right to exercise influence because of the leader s (a) role or position within the organisation (b) ability to ... perception of the leader as someone who is competent and who has some special knowledge or expertise.]

Answer : (a) role or position within the organisation 

Description : While considering the seven leadership styles described by the leadership continuum, all of the following are variables that need to be considered for a manager, EXCEPT, (a) manager's preferred style ... style based on knowledge. (d) manager's preferred style based on confidence in upper management.

Answer : (d) manager's preferred style based on confidence in upper management. 

Description : The conflict-handling orientation that is based on a process of give-and-take and an emphasis on “splitting the difference” is: (a) avoiding. ; (b) collaborating. ; (c) accommodating. ; (d) compromising. 

Answer : (d) compromising.

Description : Four identical samples of a metal are heated to different temperatures. Based on the colors of their incandescences, which sample is the hottest? The sample that is: w) blue-white x) bright red y) yellow z) orange

Answer : ANSWER: W -- BLUE-WHITE

Description : Do you think that judging people based on their looks makes sense?

Description : In the early 17th century, based on his observations with a telescope, Galileo Galilei attacked a belief espoused by the church. That belief was: w) that the earth was flat. x) the sky was a large dome ... seen. y) that the earth was at the center of the universe. z) there are no other planets.

Answer : ANSWER: Y -- THAT THE EARTH WAS AT THE CENTER OF THE UNIVERSE. 

← Prev Question Next Question →
editChoose topic
...