search
person
can voltage exist without current?

1 Answer

No
thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : Honesty is the cornerstone of all success, without which confidence and ability to perform shall cease to exist. - M ary Kay Ash famous quote  

Description : Which one of the following is the name of a device used to measure voltage without drawing ANY current from the circuit being measured? Is it: w) a wattmeter x) a galvanometer y) an ammeter z) a potentiometer

Answer : ANSWER: Z -- A POTENTIOMETER

Answer : In order that current should flow without causing excessive heating or voltage drop, the relay contacts should have low contact resistance, be clean and smooth, be of sufficient size and proper shape.

Description : The temperature and pressure at which a substance can exist in all three phases of matter simultaneously is called what? 

Answer : ANSWER: TRIPLE POINT

Description : Attitude, once established Options: A) Generally continue to exist even if they do not provides satisfaction for one's motives B) Can be changed relatively easily by introducing ... effectively by intellectual appeal than by emotional appeal D) Are often maintained through selective perception

Answer : D) Are often maintained through selective perception

Description : In a relational database model, NULL values can be used for all but which one of the following? (A) To allow duplicate tuples in the table by filling the primary key column(s) with NULL. (B) To ... D) To fill a column in a tuple when that column does not really exist for that particular tuple.

Answer : (A) To allow duplicate tuples in the table by filling the primary key column(s) with NULL.

Description : The word Biosphere refers to : (1) Zone of soil, water and air around earth capable of supporting the flora and fauna. (2) Part of earth surface which can support the flora (3) Parts of air around earth a where life can exist (4) Zone of water on earth which can support life.

Answer : Zone of soil, water and air around earth capable of supporting the flora and fauna. 

Description : A field of force can exist only between?

Answer : A field of force can exist only between two ions.

Description : The common-emitter transistor circuit can amplify a small current signal because a small change in the signal current produces one of the following. Does the change in signal produce a large change in the: w) emitter-base voltage x) base current y) collector current z) collector voltage

Answer : ANSWER: Y -- COLLECTOR CURRENT

Description : The -------can conduct current in either direction and is turned-on when the breakover voltage is exceeded  A) SCR B) Diac  C) SCS D) Traic

Answer : The diac  can conduct current in either direction and is turned-on when the breakover voltage is exceeded.

Description : An amplifier without feedback has a voltage gain of 50, input resistance 1kΩ and output resistance of 2.5kΩ. The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 would be: (1) 1/11 kΩ (2) 1/5 kΩ (3) 5 kΩ (4) 11 kΩ

Answer : An amplifier without feedback has a voltage gain of 50, input resistance 1kΩ and output resistance of 2.5kΩ. The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 would be: 1/11 kΩ

Description : The voltage gains of the amplifier with and without feedback are 20 and 100 respectively. The percentage of negative feedback would be

Answer : The voltage gains of the amplifier with and without feedback are 20 and 100 respectively. The percentage of negative feedback would be 4%

Answer : A 220 V D.C. generator is run at full speed without any excitation. The open circuit voltage will be about 2 V.

Description : What kills, current or voltage?

Answer : Current would kill. You can actually have thousands of bolts going through you and not even know it. Yes you probably know already voltage is current times resistance. Since your body is a resistor it would take just a small amount of current to create a very high voltage

Description : Define: i) Knee voltage ii) Reverse saturation current 

Answer : i) Knee voltage : The applied forward voltage, at which the PN junction starts conducting and current starts increasing exponentially is called knee voltage. It is 0.7V for Si and 0. ... semiconductor diode caused by diffusion of minority carriers from the neutral regions to the depletion region.

Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

Description : Write the procedure of converting a given current source into voltage source.

Answer : Conversion of current source into equivalent voltage source:  Let IS be the practical current source magnitude and   ZI be the internal parallel impedance.   VS be the equivalent practical voltage source magnitude and   ZV be the internal series impedance of the voltage source.

Description : Does conventional current return to the positive or negative terminal of the voltage source? 

Answer : Dear shimroz123, Conventional current flowing form positive terminals to negative terminals Sincerely  Masjed Gul Popal  EEE

Description : Why inductor current lags inductor voltage ?

Answer : Inductor is a wire wounding structure having a core material it induces emf which is opposite to the voltage supply and proportional to rate of change of current so current lags the voltage in inductor

Description : Describe with neat circuit diagram the method of measurement of power in a High voltage, high current a.c circuit.

Answer : Circuit diagram:  Explanation:  The primary winding of P.T is connected across high voltage side and secondary winding is connected to pressure coil of low range wattmeter. The high voltage is ... is used Real power consumed = reading of wattmeter x ratio of C.T x ratio of P.T

Description : Explain lagging quantity and leading quantity, explain this concept with voltage and current waveform

Answer : When two alternating quantities attain their respective zero or peak values simultaneously, the quantities are said to be in-phase quantities. When the quantities do not attain their respective zero or ... current is leading the voltage or the voltage is said to be lagging behind the current.

Description :  Compare series and parallel circuit in terms of voltage and current.

Answer : Series circuits Parallel circuits Only ONE path for current to flow in a closed circuit Number of path for current to flow in a closed circuit Current remains the SAME ... Voltage is DIFFERENT across each component Voltage remains the same across each component of the circuit

Description : Compare BJT common base configuration with common collector configuration on the basis of (i) Current gain (ii) Voltage gain (iii) Input impedance (iv) Output impedance

Answer : Parameter Common Base Common Collector Current gain Low (About 1) High (1+β) Voltage gain High 1  Input impedance  Low High Output impedance High Low

Description :  In an energymeter which coil carries the current proportional to supply voltage _____. 

Answer :  In an energymeter which coil carries the current proportional to supply voltage Pressure coil. 

Description : If the voltage applied across a capacitor is triangular in waveform, the waveform of the current is (a) Triangular (b) Rectangular (c) Sinusoidal (d) Trapezoidal

Description : For the given voltage and current, the value of voltage regulation of a line for lagging loads with decrease in power factor (a) decreases (b) increases (c) remains same (d) either (a) or (c) 

Description : If current is I and voltage is V, then power P is equal to

Answer : If current is I and voltage is V, then power P is equal to V x I

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

Description : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :  (A) 34.64 kVA (B) 75 kVA (C) 20 kVA (D) None of the above

Answer : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be : 34.64 kVA

Description : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

Answer : Which of the following is the least expensive protection for over current in low voltage system?  (A) Rewireable fuse (B) Isolator (C) Oil Circuit breaker (D) Air break circuit breaker

Description : A current controlled voltage source is equivalent to :  (A) series voltage feed -back amplifier (B) shunt current feed -back amplifier (C) shunt voltage feed -back amplifier (D) series current feed -back amplifier

Answer : A current controlled voltage source is equivalent to : shunt voltage feed -back amplifier

Description : A network that consists of at least a voltage source or current source is called A) Active network B) Ideal network C) Sourced network D) Outsourced network

Answer : A network that consists of at least a voltage source or current source is called Active network

Description : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are (A) 140 W (B) 180 W (C) 240 W (D) 480 W

Answer : A transformer at 25 Hz develops 20 W hysteresis loss and 50 W eddy current loss. If the applied voltage and frequency are doubled, the new core losses are 240 W

Description : A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series circuit, just after the switch is closed, is equal to (1) Zero (2) V/L (3) V/C (4) V.L/C 

Answer : When is a series RLC circuit is over damped

Description : If the rms voltage drop across a 15 kilt resistor is 16 V, the peak current through the resistor is : -  a) 15 mA b) 1.5 mA c) 10 mA d) 1 mA

Answer : If the rms voltage drop across a 15 kilt resistor is 16 V, the peak current through the resistor is : - 1.5 mA

Description : When the SCR conducts, the forward voltage drop will   (a) 0.7 V at all load current (b) 2 to 2.5 V at all load current (c) increases slightly with load current (d) remains constant with load current 

Description : The power supply whose output voltage varies with variation in input voltage or output load current is known as   (a) Regulated Power Supply (b) Unregulated Power Supply (c) Uninterruptible Power Supply (d) Switched Mode Power Supply 

Description : The voltage phasor of a circuit is 10 ∠15° V and the current phasor is 2∠–45° A. The active and reactive powers in the circuit are   (a) 20 2 W and 10 2 VAR (b) 10 W and 10 3 VAR (c) 5 W and 5 3 VAR (d) 10 3 W and – 10 VAR 

Answer : Angle between voltage and current ¢=15-(-45)=60° Cos60°=1/2  Active power =vicos¢=10×2×1/2=10watt Reactive power=visin¢=10×2×sin60°=20×√3/2=10√3

Description : An alternator is delivering rated current at rated voltage and 0.8 power-factor lagging. For delivering rated current at rated voltage and 0.8 poWer—factor leading, the required excitation will be:  (A) less  (B) more (C) more or less (D) the same

Answer : An alternator is delivering rated current at rated voltage and 0.8 power -factor lagging. For delivering rated current at rated voltage and 0.8 power -factor leading, the required excitation will be: more 

Description : What happens to the angle between current and voltage, when a small capacitance is added in series with a highly inductive circuit?  (A) Increases (B) Remains same as earlier angle (C) Decreases (D) Becomes indeterminant

Description : If the load current and flux of a DC motor are held constant, and voltage applied across its armature is increased by 10%, its speed will:  (A) Decrease by 10%. (B) Remain unchanged. (C) Increase by 10%. (D) Increase by 20%. 

Description : What is the nature of supply current in parallel RC circuit with reference to the voltage?  (A) In phase (B) Lags by 90 degree (C) Leads by 90 degree (D) Compensates and becomes zero 

Description : “In all cases of electromagnetic induction, an induced voltage will cause a current to flow in a closed circuit in such a direction that the magnetic field which is caused by that current will oppose the change that produces the current” is the original statement of

Answer : “In all cases of electromagnetic induction, an induced voltage will cause a current to flow in a closed circuit in such a direction that the magnetic field which is caused by that current will oppose the change that produces the current” is the original statement of Lenz’s law.

Answer : Has a lower input impedance, Can measure a.c. signals , Provides a method of inductive coupling

Answer : If we increase the current sensitivity of a galvanometer the voltage sensitivity will Decrease.

Description : The product of apparent power and cosine of the phase angle between circuit voltage and current is?

Answer : In parllpar reasonans RLC circuit the current is

Description : The phase difference between voltage and current wave through a circuit element is given as 30°. The essential condition is that?

Answer : The phase difference between voltage and current wave through a circuit element is given as 30°. The essential condition is that both waves must have same frequency.

Description : The power consumed in a circuit element will be least when the phase difference between the current and voltage is?

Answer : The power consumed in a circuit element will be least when the phase difference between the current and voltage is 90°.

Answer : Current transformers (CT) : Current transformer (CT) actually step down the high current to low current for the operation of relays. Current transformer is use for measurement of ... use for relay. This is about potential transformer.

← Prev Question Next Question →
editAsk a Question
...