search
person

1 Answer

The motor used for the compressors is capacitor-start capacitor-run motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : Where are portable screw compressors used?

Answer : Where are portable screw compressors used? The use of a portable screw air compressor in road, construction, mining and installation works indicates that its area of practical use is ... with these important, but fairly simple requirements will significantly lengthen the life of your compressor.

Answer : The type of D.C. motor used for shears and punches is cumulative compound D.C. motor.

Answer : The shaded pole motor is used for low starting torque.

Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

Answer : The electric motor used in portable drills is universal motor.

Description : How do screw compressors differ from reciprocating ones?

Answer : All air compressors are divided into two types: reciprocating and screw, and many enterprises are faced with the problem of choosing a compressor. This choice affects not only the efficiency of the ... for screw compressor equipment. Based on materials from the site http://compressor.dukon.ru/ .

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Description : State starters used for i) 3-Ph squirrel cage induction motor (3HP) ii) D.C. motor 

Answer : Name the starters used for following motors : i) 3 H.P. 3-Ph squirrel cage I.M: i) DOL starter OR ii) Star-Delta Starter OR ii) Auto transformer starter OR iii) Soft start starter.  ii) D.C Shunt Motor : 1) Armature resistance starter (Three Point Starter) OR 2) Four Point Starter 

Description : The motor used for electric traction is  (1) D.C. shunt motor (3) D.C. series motor  (2) D.C. compound motor (4) Synchronous motor

Answer : The motor used for electric traction is D.C. series motor

Answer : In a two value capacitor motor, the capacitor used for running purposes is paper spaced oil filled type.

Answer : A shaded pole motor can be used for toys, hair dryers, circulators etc.

Description : Why DC motor is used for traction?

Answer : The repulsion-start induction-run motor is used because of high starting torque.

Answer : The motor used on small lathes is usually single-phase capacitor run motor.

Answer : A centrifugal switch is used to disconnect starting winding when motor has picked up about 50 to 70 per cent of rated speed.

Description : The damping winding in synchronous motor is generally used to?

Answer : The damping winding in synchronous motor is generally used to provide starting torque and prevent hunting.

Description : Which type of starter is used to start the DC motor?

Description : Which type of motor is used in lift?

Answer : Synchronous motor

Description : Which motor is used in traction system?

Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

Description : Peterson coil is used for :  (A) shunt compensation of lines (B) grounding of system neutral (B) reduce fault currents (D) connecting interconnected systems

Answer : Peterson coil is used for : grounding of system neutral

Answer : Flywheel is used with D.C. compound motor to reduce the peak demand by the motor, compound motor will have to be cumulatively compounded.

Answer : if induction motor rotates exceed than its synchronous speed, it acts as a generator.

Description : Describe the reason of using dc series motor for electric trains.

Answer : Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

Description : For using regenerative breaking, the most suitable motor is :  (A) DC series motor  (B) Slip ring induction motor  (C) Squirrel cage induction motor  (D) Synchronous motor

Answer : For using regenerative breaking, the most suitable motor is : Slip ring induction motor

Description : A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for

Answer : A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for 4 poles

Answer : For a D.C. shunt motor if the excitation is changed torque will change but power will remain constant.

Answer : D.C. Series motor is generally preferred for cranes and hoists.

Answer : For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

Answer : Cumulatively compounded D.C. motor will be suitable along with flywheel for intermittent light and heavy loads.

Answer : In case the conditions for maximum power for a D.C. motor are established, the efficiency of the motor will be less than 50%.

Answer : For starting a D.C. motor a starter is required because it limits the starting current to a safe value.

Answer : Cumulative compound D.C. motor is preferred for elevators.

Answer : If a D.C. motor is to be selected for conveyors, Series motor would be preferred.

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

Description : Stepper motors are used in  (1) printers (2) lifts (3) amplifiers (4) oscillators

Answer : Stepper motors are used in printers 

Description : In a dc machine, interpoles are used to  (1) neutralize the effect of armature reaction in the interpolar region (2) generate more induced emf in the armature (3) avoid interference of the armature flux with the main -field flux (4) reduce the demagnetizing effect of armature reaction

Answer : In a dc machine, interpoles are used to neutralize the effect of armature reaction in the interpolar region

Answer : In D.C. machines fractional pitch winding is used to reduce the sparking.

Answer : Starters are used with D.C. motors because to restrict armature current as there is no back e.m.f. while starting.

Answer : The capacitors used in single-phase capacitor motors have no polarity marking.

Description : What are the five types of single phase motors used in the industry?

Description : Split phase induction motor

Answer : Split phase induction motor : There are two windings used in split phase induction motor. It is a type of single-phase induction motor. There are two winding one is called main winding and ... motor have low starting torque it is used for small fans, blowers, centrifugal pumps, grinders etc.

Description : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Answer : A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

Description : Damper winding in a synchronous motor

Answer : Damper winding in a synchronous motor Serves to start the motor.

Description : In a double squirrel cage induction motor, good starting torque is produced as (A) Large current flows through the outer high resistance winding. (B) Large current flows through the inner high ... the outer high resistance winding. (D) Large current flows through the inner low resistance winding.

Answer : In a double squirrel cage induction motor, good starting torque is produced as Large current flows through the outer high resistance winding.

Description : A change of 4% in the supply voltage to an induction motor will produce a change of approximately

Answer : A change of 4% in the supply voltage to an induction motor will produce a change of approximately 8% in the rotor torque

Description : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Answer : A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

Description : In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will  (1) reduce to one-half (2) reduce to one-fourth (3) remain unchanged (4) increase four times

Answer : In an induction motor if the flux density is reduced.to one-half, of its normal value then the torque will reduce to one-fourth

Description : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Answer : The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

← Prev Question Next Question →
editChoose topic
...