search
person

1 Answer

The wattage of motor for driving domestic sewing machine will be around 100 to 150 W.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Answer : The wattage rating for a ceiling fan motor will be in the range 50 to 150 W .

Answer : The speed control of universal motor used for sewing machines is by varying the resistance.

Description : For testing appliances, the wattage of test lamp should be?

Answer : For testing appliances, the wattage of test lamp should be high.

Description : If we change the excitation of synchronous machine will it affect on motor speed?

Answer : No, If we change the excitation of synchronous machine it will not affect on motor speed.

Answer : D.C. shunt motors are used for driving machine tools.

Answer : Most common form of A.C. meters met with in every day domestic and industrial installations are induction type single phase energy meters.

Answer : The load factor of domestic load is usually 10 to 15%.

Description :  Analyze the differences of FOC and DTC. The switching frequency of FOC is 1.3 kHz and the average switching frequency of DTC is the same.

Description : The number of poles in a phase induction motor at 50 Hz and running at 1500 rpm will be?

Answer : The number of poles in a phase induction motor at 50 Hz and running at 1500 rpm will be 4.

Answer : When a D.C. series motor is connected to A.C. supply, the power factor will be low because of high inductance of field and armature circuits.

Answer : The value of starting capacitor of a fractional horse power motor will be 300 uF .

Description : I got some grapic drawing questions guys and I need to see the answers immediately.Stator voltage curve for each four different start up methods.

Answer : A shaded pole motor can be used for toys, hair dryers, circulators etc.

Description : If we change the excitation of synchronous machine will it affect on power factor?

Answer : Yes, If we change the excitation of synchronous machine it will affect on power factor. If the synchronous motor is overexcited then it will have leading power factor and if the motor is underexcited then it will have lagging power factor.

Answer : In any rotating machine that part which houses the conductors and in which e.m.f. induced is to be utilised is called armature.

Answer : Direction of rotation of a split phase motor can be reversed by reversing the connection of either running winding or starting winding.

Description : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be?

Answer : The running winding of a single phase motor on testing with meggar is found to be ground. Most probable location of the ground will be at the slot edge where coil enters or comes out of the slot.

Answer : In a capacitor start motor, the phase displacement between starting and running winding can be nearly 90°.

Description : Write down the steps involved for internal thread cutting on lathe machine.

Answer : Steps involved for internal thread cutting on lathe machine  1) Hole is first bored to the root diameter of the thread. 2) Tool is fixed on the tool post or on the boring bar adjusted the angle of ... the start. 10) Keep going until the calculated depth of cut has been reached on the top slide.

Description : Electrical specifications with values for washing machine. 

Answer : 1. Type: Top loading / Front loading type 2. Capacity range: 6kg to 15kg 3. Motor Used: Induction motor 4. Input voltage: 100V- 240V 5. Power: in 1200W / Output power 100–400W{can go upto 1000W) 6. Efficiency: Max efficiency 31% 7. Wattage: 2.100-2.400 W 8. Current: 13A 9. Frequency: 50hz

Description : Draw block diagram for CNC drilling machine and explain its working.

Answer : Block diagram consist of the following points:  Machine tool with DC servo motor as feedback element. The transducer is added as adaptive control application.  The auxiliary controller ... line.  The interrupt pulses are generated by TBG and supplied to computer through inter

Description : The 'Equal area criterion' for the determination of transient stability of a synchronous machine connected to an infinite bus  (1) ignores line as well as synchronous machine resistance ... consideration the possibility of machine losing synchronism after it has survived during the first swing.

Answer : 1

Description : Aluminium is not used as winding wire for the armature of a dc machine because  (1) aluminium has low resistivity (2) a large winding space is taken by aluminium conductors and creates ... ) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Answer : Aluminium is not used as winding wire for the armature of a dc machine because  (2) a large winding space is taken by aluminium conductors and creates jointing problems (3) the thermal conductivity of aluminium is low (4) aluminium has low conductivity as compared to copper

Description : Torque angle for the synchronous machine is the angle between (A) stator magnetic field and rotor magnetic field (B) stator magnetic field and net magnetic field in the air gap (C) rotor magnetic field and net magnetic field in the air gap (D) excitation voltage and impedance voltage drop

Answer : Torque angle for the synchronous machine is the angle between rotor magnetic field and net magnetic field in the air gap

Answer : In a two value capacitor motor, the capacitor used for running purposes is paper spaced oil filled type.

Description : Synchronous wattage of induction motor means: A) rotor input in watts B) stator input in watts C) combined stator and rotor input in watts D) shaft output in watts

Answer : Synchronous wattage of induction motor means: rotor input in watts 

Description : In a single phase induction motor driving a fan load, the reason for having a high resistance rotor is to achieve (A) low starting torque (B) quick acceleration (C) high efficiency (D) reduced size

Answer : In a single phase induction motor driving a fan load, the reason for having a high resistance rotor is to achieve quick acceleration

Description : How to choose a rowing machine and how to use it?

Answer : Many people know that it is easy to calculate rowing athletes against the background of other people by a special article. The beauty of their figure is formed during rowing sessions, which provide an ... times for 10 minutes with 10-minute breaks, this will be tantamount to one 30-minute lesson.

Description : Capsule coffee machine. What are the advantages?

Answer : Having a coffee maker in the house helps us to easily cheer up and brighten up the beginning of the upcoming day in the morning, especially if the weather is unpleasant. A cup of hot ... favor is the fact that the profile of this manufacturer is precisely capsule coffee makers and coffee capsules.

Description : How to choose a washing machine?

Answer : How to choose a washing machine? When choosing a washing machine, first of all, you need to think about the future location of its placement. According to what space you have, choose: ... occurs using a fairly simple method - the machine includes an additional rinse cycle. Enjoy the shopping!

Description : Explain the basic parts of a slotting machine with neat sketch. 

Answer : Base or Bed The base is rigidly built to take up all the cutting forces and the entire load of the machine. The top of the bed is accurately finished to provide guideways on which ... return mechanism. 2. Variable speed reversible motor drive mechanism. 3. Hydraulic drive mechanism.

Description : Write down the basic parts of a lathe machine with their proper functions. 

Answer : Important Parts of Lathe and their Functions 1. Bed It is the main body of the machine. All main components are bolted on it. It is usually made by cast iron due to its high compressive strength and ... carriage on bed. 12. Spindle: It is the main part of lathe which holds and rotates the chuck.

Description : Types of slotting machine

Answer : 1. Puncher slotter 2. Precision slotter 3. Production slotter  Working Principle of Slotting machine:- The slotting machine is a reciprocating machine tool in which, The vertical slide holding the cutting ... longitudinal and cross feeds, a rotary feed motion is also provided in the work table. 

Description : Define Feed and speed in shaping machine

Answer : 1) Feed: Feed (S) is the relative movement of the work or tool in a direction perpendicular to the axis of reciprocation of the ram per double stroke. It is expressed in mm per stroke. 2) Speed: ... speed is the speed at which the metal is removed by the cutting tool in a period of one minute.

Description : Why poles of dc machine are laminated?

Answer : Poles of DC machines are laminated to reduce the eddy current losses in the poles.

Answer : Copper losses,iron losses,variable losses , constant losees

Description : function of exposer in photocopier machine.

Answer : A bright lamp illuminates the original document, and the whitws areas of the original document reflect the light onto the surface of the photoconductive drum. The areas of the drum that are exposed ... discharge to the ground. The areas of the drum not exposed to light remains negatively charged

Description : Explain concept of back emf in DC machine. State how it governs armature current. 

Answer : Back emf: When the armature of DC machine rotates under the influence of driving torque, the armature conductors move in the magnetic field and cut it and hence emf is induced in them. The ... flow of armature current i.e. it automatically changes the armature current to meet load requirements.

Description : UNIT 1 fundamentals of AC rotating machine Contents 1.1 Introduction 1.2 Advantages 1.3 Parts of AC machines 1.4 Synchronous speed 1.5 AC winding 1.6 Winding factor ( ... alternator or generator 1.9 Numericals 1.10 Harmonic 1.11 Slot harmonics 1.12 Harmonics minimization

Answer : 1.2 Advantages: In practices most of alternator have rotating magnetic field type construction with stationary armature due to following reason. The generation level of AC voltage may be in the range ... at high speed. Only two Slip rings are required to excited the field by AC supply.

Description : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Answer : In 8085 microprocessor, how many T-states does OPCODE FETCH machine cycle normally require (i.e., when HOLD and WAIT signals are NOT forced)? A) 4 to 6 B) 3 to 8 C) 2 to 3 D) 8 to 12 

Description : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is

Answer : A 200 V DC machine supplies 20 A at 200 V as a generator. The armature resistance is 0.2 Ohm. If the machine is now operated as a motor at same terminal voltage and current but with the flux increased by 10%, the ratio of motor speed to generator speed is 0.87

Description : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively

Answer : A 36 slot, 4 -pole, dc machine has a simplex lap winding with two conductors per slot. The back pitch and front pitch adopted could be respectively 19,17

Description : In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as  (1) synchronous motor (2) synchronous generator (3) asynchronous motor (4) asynchronous generator

Answer : In a synchronous machine, if the field flux axis ahead of the armature field axis in the direction of rotation, the machine is operating as synchronous generator 

Description : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole)  (A) has q -axis current only (B) has d -axis current only (C) has both d and q axis currents (D) cannot be divided between q and d axis currents

Answer : The armature current on symmetrical 3 phase short circuit of a synchronous machine (salient pole) has d -axis current only

Description : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is  (1) 1000V (2) 100V (3) 600V (4) 10,000V

Answer : The induced emf in the armature of a lap -wound four -pole dc machine having 100 armature conductors rotating at 600 rpm and with 1 Wb flux per pole is 1000V

Description : In a dc machine, interpoles are used to  (1) neutralize the effect of armature reaction in the interpolar region (2) generate more induced emf in the armature (3) avoid interference of the armature flux with the main -field flux (4) reduce the demagnetizing effect of armature reaction

Answer : In a dc machine, interpoles are used to neutralize the effect of armature reaction in the interpolar region

Description : During a disturbance on a synchronous machine, the rotor swings form A to B before finally setting down to steady state at point C on the power angle curve. The speed of the machine during oscillation is synchronous at point(s)

Answer : During a disturbance on a synchronous machine, the rotor swings form A to B before finally setting down to steady state at point C on the power angle curve. The speed of the machine during oscillation is synchronous at point(s) only at C

Description : The magnetic neutral plane shifts in a dc machine (A) in the direction of motion of motor (B) in the direction of motion of generator (C) due to increase in the field flux (D) cause reduction of flash over between commutator segments

Answer : The magnetic neutral plane shifts in a dc machine in the direction of motion of generator

Answer : In a D.C. machine stray loss is the sum of iron loss and mechanical loss.

← Prev Question Next Question →
editChoose topic
...