search
person

1 Answer

Service mains are the conductors, which connect the consumer's terminals to the distribution.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the _______ of conductor.  (1) Surface (2) Center (3) Complete cross section area (4) Axis

Answer : The skin effect in conductors is due to non uniform distribution of current in it and major portion of current is near the Surface of conductor. 

Description : If an unsymmetrical line to ground fault occurs at the secondary terminals of a delta/star, ungrounded transformer, then  (A) zero sequence currents are present on both sides of the transformer  (B) ... side  (D) zero sequence currents are present on the primary side but not on the secondary side

Answer : If an unsymmetrical line to ground fault occurs at the secondary terminals of a delta/star, ungrounded transformer, then zero sequence currents are absent on both sides of the transformer 

Description : A network is said to be under resonance when the voltage and the current at the network input terminals are (A) in phase (B) out of phase (C) in phase quadrature (D) in phase, and have equal magnitudes

Answer : A network is said to be under resonance when the voltage and the current at the network input terminals are in phase

Description : The number of terminals present in IGBT is A) 2 B) 3 C) 4 D) 5

Answer : The number of terminals present in IGBT is 3

Description : A MOSFET has how many terminals?

Answer : A MOSFET having three terminals 1st one is Gate (insulated), 2nd one is Source and 3rd one is Drain.

Answer : BJT have three terminals Base, emitter and collector.

Answer : Thyristor have three terminals anode, cathode and Gate.

Answer : Diode have two terminals.

Answer : In any rotating machine that part which houses the conductors and in which e.m.f. induced is to be utilised is called armature.

Description : Which have more free electrons: conductors or insulators? 

Answer : Conductors have many free electrons whereas insulators have very few or none at all.

Answer : The commutator segments are connected to the armature conductors by means of copper lugs.

Description : advantage and disadvantages of stranded conductors. 

Answer : Advantage and disadvantages of stranded conductors  Advantages of Stranded Conductors:-  1. Conductor becomes flexible.  2. Its weight reduces.  3. Easy for handling.  4. Easy to ... Stranded Conductors:-  1. Due to stranding of conductor its resistance increases slightly about 2%. 

Description : Name two good conductors, two good insulators, and two semiconductors.

Answer : In general all metals are good conductors, with silver the best and copper second.

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

Description : The induced e.m.f. in the armature conductors of a d.c. motor is?

Answer : The induced e.m.f. in the armature conductors of a d.c. motor is sinusoidal.

Description : All good conductors have high?

Answer : All good conductors have high conductance.

Description : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be?

Answer : Two copper conductors have equal length. The cross-sectional area of one conductor is four times that of the other. If the conductor having smaller cross-sectional area has a resistance of 40 ohms the resistance of other conductor will be 10 ohms.

Description : Explain following techniques related to energy conservation in transmission and distribution system. (i) By balancing phase currents (ii) Variable technical losses (I2R losses).

Answer : (i) Balancing Phase currents: Proper (healthy balanced) three phase loads always draw equal currents in all lines but single phase loads in the 3 phase 4 wire system or loads connected between two ... . 11) Minimize I2R losses. 12) Balance the load currents. 13) Regulate the system voltages.

Answer : In a distribution system, in order to improve power factor, the synchronous capacitors are installed at the receiving end.

Description : Grid distribution system

Answer : Grid distribution system:-  In this system, when the feeder or loop or ring is charged (energized) by two or more than two substations from two or more than two different generating stations then it is known as “Grid distribution system. In this system only one feeder is utilized at a time. 

Description : Define: primary and secondary distribution system 

Answer : i) Primary Distribution:  It is a 3-phase, 3-wire transmission line connected in between receiving substation to Distribution substation. OR It is link between receiving substation & ... substation to consumer line. OR It is link between distribution transformer substation & consumer. 

Description : State the condition for selecting site for distribution substation. 

Answer : Following condition should be considered while selecting site for distribution sub-station:-  1. Near load center :  Sub-station should be located near load center to reduce cost of Transmission and ... free from earthquake :  To avoid damage to sub-station area should be free earth quake. 

Description : State the classification of distribution substation. 

Answer : The classification of distribution substation. 1. Pole mounted distribution substation 2. Plinth mounted distribution substation 3. Compact/prefabricated distribution substation 4. ... Indoor distribution substation 6. Outdoor distribution substation 7. Mobile distribution substation 

Description : State the losses in secondary distribution system. 

Answer : The losses in secondary distribution system: a) Technical losses: 1. Due to poor voltage 2. Due to unbalance load 3. Due poor quality of transformer & its components 4. Due to poor quality ... of induction type of energy meter. 3. Lack of administration. 4. Energy theft 5. Unmetered supply

Description : Advantages of Grid distribution scheme

Answer : Advantages of Grid distribution scheme 1. Supply to distribution transformer center is given through two different generating stations or major generating stations 2. It has highest reliability to ... highest reliability to maintain supply even when there was maintenance on any one feeder. 

Description :  different types of distribution scheme.  

Answer : According to scheme of connection: -  a) Radial (Tree) distribution system  b) Ring mains (Loop) distribution system  c) Grid (interconnected) distribution system OR Types of ... distribution system  b) Ring mains (Loop) distribution system  c) Grid (interconnected) distribution system

Description : comparison between Feeder and Distribution

Answer : Sr.No Feeder Distributor 1 It is link between receiving substation & distribution transformer   It is link between distribution transformer substation & consumer  2 ... loading point is at substation only   Distributors loading point is throughout its length. 

Description : requirements of a distribution system

Answer : Following requirements of a distribution system.  1. Layout should be simple in design. 2. It should have less initial cost 3. The distribution system should have minimum distribution ... stability of existing distribution system. 15. Time required for completion of work should be less. 

Description : Why radial distribution system used for short distance ? 

Answer : Because of following disadvantages radial distribution system is not used for long distance:  Since there is only one feeder to DTC feed at one point so, 1) There is no reliability ... more time for fault finding & repairing Hence radial distribution system is used for short distance.

Description : Write selection criteria of distribution transformer with any four points.

Answer : Selection Criteria for Distribution Transformer:  i) Ratings - The kVA ratings should comply with IS:2026 ( Part l )-1977*. The noload secondary voltage should be 433 volts for transformers to be ... is not necessary. vi) Cooling - The transformers covered in this group are generally ONAN, AN

Description : Explain with schematic diagram direct distribution of solar energy.

Answer : Explain with schematic diagram direct distribution of solar energy: Solar energy reaching earth's surface consists of two components: i) Direct solar energy, ii) Diffused solar energy. Direct solar energy ... radiation. It is very intense radiation and it can produce sun burns and shadows.

Description : The permissible voltage variation in transmission and distribution system is:  (A) ± 0.1% (B) ± 1% (C) ±10% (D) ± 25%

Answer : The permissible voltage variation in transmission and distribution system is: ±10%

Description : The main criterion for selection of the size of a radial distribution system is

Answer : The main criterion for selection of the size of a radial distribution system is voltage drop

Description : Precise control of reactive current flow entering the transmission and distribution systems can be minimized by using (A) synchronous condenser (B) static VAR capacitor (C) capacitor bank (D) thyristor switched reactor in parallel with capacitor

Answer : Precise control of reactive current flow entering the transmission and distribution systems can be minimized by using (A) synchronous condenser (B) static VAR capacitor (C) capacitor bank (D) thyristor switched reactor in parallel with capacitor

Answer : In a power or distribution transformer about 10 percent end turns are heavily insulated to withstand the high voltage drop due to line surge produced by the shunting capacitance of the end turns.

Answer : A consumer has to pay lesser fixed charges in maximum demand tariff.

Description : The load of a consumer is generally measured in terms of : (A) Volts (B) Amperes (C) Ampere hour (D) kW

Answer : The load of a consumer is generally measured in terms of : kW

Description : The consumer of electricity could be : (A) Domestic (B) Agricultural (C) Industrial and Commercial (D) All of the above 

Answer : The consumer of electricity could be : (A) Domestic (B) Agricultural (C) Industrial and Commercial (D) All of the above 

Answer : For a consumer the most economical power factor is generally 0.95 lagging .

Answer : For any type of consumer the ideal tariff is three part tariff.

Description : The ‘transportation delays’ occurring in distribution system are detrimental to stability because they produce (a) attenuation (b) phase lag (c) both (a) and (b) (d) transients 

Description : The X/R ratio for distribution lines is:

Answer : Inductance and resistance

Description : What is electric power generation transmission and distribution?

Answer : Generation: it wrong word at here.because it is no generation it is conversion of one form of energy into electrical form.it may by using any type of energy. Transmission is just to ... place to other by providing some modifications And distribution means use of this energy for any purpose.

Description : Distribution of food rains operates under a two tier system with the introduction of (1) Targetted Public Distribution System (2) The Consumers Cooperatives (3) The Cooperative Marketing Societies (4) The Service Cooperatives

Answer :  Targetted Public Distribution System

Description : A firewall may be implemented in a. routers which connect intranet to internet b. bridges used in an intranet c. expensive modem d. user’s application programs

Answer : a. routers which connect intranet to internet 

Description : 1. When was the Ninth Schedule of the Constitution of India added? 2. National Environmental Engineering Research Institute is located at which city? 3. From where does Indian Railways earn the maximum ... has the largest area under forests? 20. What is the birth place of Guru Gobind Singh?

Answer : Answer : 1. By the first Amendment 2. Nagpur 3. Freight 4. Strait of Dover 5. Rana Ratan Singh 6. 0° 7. 8 8. 52nd 9. Rann of Kutch 10. Bahlol Lodi 11. Wings of Fire 12. Wetland 13. Acid to water 14. Mediterranean Sea 15. Guru Teg Bahadur 16. Jonas Salk 17. 12 18. RBI 19. Madhya Pradesh 20. Patna

Description : Which of the following hills connect eastern and western ghats? (1) Satpura (2) Vindhya (3) Nilgiri (4) Aravalli

Answer : Nilgiri

Description : Which e-business model allows consumers to name their own price for products and services ? (A) B2 B (B) B2 G (C) C2 C (D) C2 B

Answer : (D) C2 B

Description : Which of the following is not a feature of a capitalist economy? (1) Right to private property (2) Existence of competition (3) Service motive (4) Freedom of choice to consumers

Answer : Service motive

Description : The difference between the price the consumer is prepared to pay for a commodity and the price which he actually pays is called (1) Consumer’s Surplus (2) Producer’s Surplus (3) Landlord’s Surplus (4) Worker’s Surplus 

Answer : Consumer’s Surplus

← Prev Question Next Question →
editChoose topic
...