search
person

1 Answer

The fuse rating is expressed in terms of current.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : The rating of transformer may be expressed in ____________.  (A) kVAR (B) kW (C) kVA (D) Horse power

Answer : The rating of transformer may be expressed in kVA . 

Answer : The transformer ratings are usually expressed in terms of kVA.

Description : Boiler rating is usually defined in terms of  (1) Maximum temperature of steam in Kelvin (2) Heat transfer rate in KJ/hr (3) Heat transfer area in metre2 (4) Steam output in kg/hr

Answer : Boiler rating is usually defined in terms of Steam output in kg/hr

Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Description : A fuse wire should have :  (A) Low specific resistance and high melting point (B) Low specific resistance and low melting point (C) High specific resistance and high melting point (D) High specific resistance and low melting point

Answer : A fuse wire should have : High specific resistance and low melting point

Description : ln HRC fuse the time between cut-off and final current zero is called

Answer : ln HRC fuse the time between cut-off and final current zero is called the arcing time

Answer : The fuse blows off by melting.

Answer : H.R.C. fuse, as compared to a rewirable fuse, has no ageing effect, high speed of operation, high rupturing capacity.

Answer : A fuse is connected in series with circuit.

Answer : The material used for fuse must have low melting point and high specific resistance.

Answer : The main function of a fuse is to prevent excessive currents.

Description : Important Terms in Magnetic Circuit

Answer : Important Terms in Magnetic Circuit

Description : Define the terms incandescent and incandescent lamp.

Answer : Incandescent is the phenomenon in which the object emits or creates light when it is heated. An incandescent lamp is a lamp in which the filament is heated by electrical current & light is created.

Description : Why Transformer rating is given in kVA?

Answer : 1) The output of transformer is limited by heating due to the losses. Two types of losses in the transformer (i) Iron loss, (ii) Copper loss. 2) Iron loss depends on the transformer voltage (V). ... by load power factor. - Hence the transformer output is expressed in VA or kVA and not in kW.

Answer : The wattage rating for a ceiling fan motor will be in the range 50 to 150 W .

Description : How rating of main switch and cable is selected for Industrial Installation.

Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Description : Define kVA rating of transformer.

Answer : kVA rating of transformer is defined as the product of voltage (V) and current (I) on primary side of transformer or secondary side of transformer divided by 1000. On both side the VA rating remains ... Mathematically kVA rating is given by, kVA rating of transformer = V1I1/1000 =V2I2/1000

Description : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be :  (A) 34.64 kVA (B) 75 kVA (C) 20 kVA (D) None of the above

Answer : The kVA rating of Three-phase transformer with Voltage = 200V and Current = 100A will be : 34.64 kVA

Answer : For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

Description : State any two advantages of MCB over Fuse. State the standard specifications of MCB available in the market.  

Answer : Following advantages of MCB over Fuse: 1. No need of replacement of fuse wire. 2. Manually restore of supply is simple. 3. Fault understanding by visual inspection 4. More safe than fuse The standard specifications of ... 6A, 10A,16A,20A, 25A, 30A, 32A, 40A, 50A, 60A and 63A 6. 250V and 450 v

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : Write applications of each of the following:(i) Fuse (ii) MCB (iii) MCCB.

Answer : i) Applications of fuse:  * Used in domestic installations to provide short circuit protection.  * Used in commercial / Industrial installations to provide overload and short circuit protection.  * Used in ...  * Rectifiers panels,  * U.P.S, Electronic equipment,  * Motors,  * Furnaces

Description : Give the function of fuse and switch.

Answer : Functions of fuse:  * To break the circuit under fault condition.  * To provide overcurrent protection to the circuit.  * To provide short circuit protection to the circuit.  * To provide ...  * To make the electric circuit manually.  * To break the electric circuit manually.

Description : What is a fuse ?

Answer :  A Fuse is a protective device which prevent overloading of current in a circuit.

Description : what is HRC fuse?

Answer : HRC (High Rupturing Capacity) fuse HRC fuse is High Rupturing Capacity fuse. At the time of fault it disconnect the circuit very fast. Filling powder is silica sand. No flashover ... speed response Reliable No maintenance CheaperDisadvantages:- We have to replace it manually after each operation.

Description : The rating of fuse wire is always expressed in   (a) volts (b) amperes (c) ampere-volt (d) ampere-hours 

Answer : The rating of fuse wire is always expressed in Amperes 

Description : Define the following terms related to circuit breaker. 1) Breaking Capacity 2) Making Capacity 3) Short time rating and 4) Normal current rating

Answer : 1) Breaking Capacity: It is current (r.m.s) that a circuit breaker is capable of breaking at given recovery voltage under specified conditions (e.g. power factor, rate of rise of ... under specified conditions. The only limitation in this case is the temperature rise of current-carrying parts.

Description : The Power rating of a distribution power transformer is expressed in  A) kW B) kVAR C) kVA D) Ampere

Description : Which of the following terms refers to the frequency with which a gene is expressed in a detectable way? Is it: a) polygenetics b) codominance c) allelism d) penetrance

Answer : ANSWER: D -- PENETRANCE

Description : Which of the following variables cannot be expressed in quantitative terms? (A) Socio-economic Status (B) Marital Status (C) Numerical Aptitude (D) Professional Attitude

Answer : (D) Professional Attitude

Description : The quality of petrol is expressed in terms of (1) Cetane number (2) Gold number (3) Octane number (4) Added unlead compounds

Answer : Octane number

Description : The value of a commodity expressed in terms of money is known as (1) Price (2) Utility (3) Value (4) Wealth

Answer : Price

Description : Breaking capacity of a circuit breaker is usually expressed in terms of  (1) Ampere (2) Volts (3) MW (4) MVA

Answer : Breaking capacity of a circuit breaker is usually expressed in terms of MVA

Description : The goodness of an algorithm is most often expressed in terms of its  (1) Best Case complexity (2) Average Case complexity (3) Worst Case complexity (4) Random case complexity

Description : Resistivity is usually expressed in terms of

Answer : Ohms/cm-cube.

Answer : Conductance is expressed in terms of mho.

Description : Temperature co-efficient of resistance is expressed in terms of?

Answer : Degree celsius

Description : An IDMT relay of rating 5A, 2.2s and having a relay setting of 125% is connected to a supply circuit through a CT having a ratio of 400/5. The plug setting multiplier of IDMT relay in the event of fault current of 4000 A will be a. 5 b. 8 c. 10 d. 125

Description : A relay has a rating of 5 A, 2.2 sec IDMT and a relay setting of 125% TMS = 0.6. It is connected to a supply circuit through a C.T. 400/5 ratio. The fault current is 4000 A. The operating current of the relay is

Answer : A relay has a rating of 5 A, 2.2 sec IDMT and a relay setting of 125% TMS = 0.6. It is connected to a supply circuit through a C.T. 400/5 ratio. The fault current is 4000 A. The operating current of the relay is 6.25A

Description : Explain the meaning of following terms: i) MCB ii) Socket outlet iii) Neutral iv) Fuse-link

Answer : i) MCB:  Miniature circuit breaker operates automatically at the time of fault or over load. And it is used for the protection of electrical installation. They are available from 0.5 A to 100 Amps. ... melts automatically at the time of fault or over load. Fuse must be replaced after the fault.

Description : Describe the working of HRC fuse with neat diagram.

Answer : Working of HRC Fuse: Under normal conditions, the fuse element is at a temperature below its melting point. Therefore, it carries the normal current without overheating. When a fault ... powder and results in the formation of high resistance substance that helps in quenching the arc. 

Description : Explain construction and characteristics of HRC fuse.

Answer : Construction of H.R.C. Fuse: Figure shows the essential parts of a typical H.R.C. fuse. It mainly consist of a heat resisting ceramic body. Both the ends of the cermaic body consists ... particular circuit and for coordination purpose. A typical Fuse characteristic is shown in figure below. 

Description : Describe the difference between fuse and MCCB.

Answer : Sr. No Fuse MCCB 1 Fuse melts / fuses in case of excessive load. MCCB trips off in case of excessive load. 2 Fuse needs to be replaced after every ... Generally protects the load against short-circuit. Generally protects the load against different types of faults.

Description : Define the following terms with respect to protective relays i) Relay time ii) Reset current iii) Plug setting multiplier and iv) Time setting multiplier

Answer : 1) Relay Time: The time interval between occurrence of fault and closure of relay contacts.  2) Reset Current: The value of current below which the relay resets and comes back to ... The adjustment arrangement provided for setting the operation time of relay is known as Time setting multiplier. 

Description : Distances to stars are usually expressed in units called a. miles b. b. kilometers c. c. light-years d. astronomical units 

Answer : c. c. light-years  

Description : The velocity of a ball tossed vertically into the air is expressed by the equation v(t) = -32t + 4, where t is given in seconds. Give the velocity of the ball when it reaches its highest point. 

Answer : ANSWER: 0

Description : Electric current may be expressed in which one of the following units? w) coulombs/volt x) joules/coulomb y) coulombs/second z) ohms/second

Answer : ANSWER: Y -- COULOMBS/SECOND

Description : "Under the same conditions of temperature and pressure, the volumes of reacting gases and of their gaseous products are expressed in ratios of small whole numbers." This law is attributed to: w) Dalton x) Gay-Lussac y) Ramsay z) Avogadro

Answer : ANSWER: X -- GAY-LUSSAC

Description : Concept means (A) A mental image (B) A reality (C) An idea expressed in language form (D) All the above

Answer : (A) A mental image

← Prev Question Next Question →
editChoose topic
...