search
person

1 Answer

Impedance relays are used for phase faults on long line.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Answer : The inverse definite mean time relays are used for over current and earth fault protection of transformer against internal short-circuits.

Answer : The single phasing relays are used for the protection of three phase motors.

Description : IDMT relays are used to protect the transformer against :  (A) Internal short -circuits (B) Open circuits (C) External short circuits (D) Oil leakage

Answer : IDMT relays are used to protect the transformer against : External short circuits

Description : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Answer : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as long line

Answer : Reactance relay is preferred for phase fault on short transmission line.

Description : what is mean by long transmission line ?

Answer : The transmission line which have length more than 250 km are known as long transmission lines.

Description : Draw a neat sketch and explain the accessory used to support long work.

Answer : Accessory to support long work: A steady rest is a tool for a lathe, enabling a machinist to make deep cuts in long, slender stock, bore out thin pieces of metal, and generally keeps thin stuff straight. ... tool that follows the cutter, a steady rest is firmly attached to the bed of a lathe.

Answer : Large internal faults are protected by merz price percentage differential protection.

Description : Write the relation between phase and line current, phase and line voltage for Star connection.

Answer : Line voltage is equal to root three times of phase voltage and line and phase currents are equal in star connection

Description : For 11kV line the inductance per km per phase will be of the order of:  (A) 1 H (B) 0.1 H (C) 1 mH (D) 0.1 mH

Answer : For 11kV line the inductance per km per phase will be of the order of: 1 mH

Answer : To protect most of the electrical equipment handling low power, the types of relays used are thermocouple, electronic and bimetallic.

Answer : Thermal overload relays are used to protect the motor against overcurrent due to heavy loads.

Answer : Directional relays are based on flow of power.

Description : What is line voltage and phase voltage? Draw balanced three phase star connected system. Show all the voltages and currents.

Description : What is the difference between line and phase current?

Answer : The currents flows through phase lines is called line voltage and currents flows from phase to neutral line is called phase current

Description : What is the difference between line and phase voltage?

Answer : Line voltage  is  voltage  between two  phases R &Y  (415 v)  while  phase  voltage  is  the  voltage  between  one  phase and  a neutral  B &  N   (240 v).

Description : What is the voltage in 3 phase line?

Answer : between 430 to 440 v

Answer : Discrimination between main and back up protection is provided by the use of relays which are slow.

Answer : Protective relays are devices that detect abnormal conditions in electrical circuits by measuring constantly the electrical quantities which differ during normal and abnormal conditions.

Description : D.C. shunt relays are made of?

Answer : D.C. shunt relays are made of many turns of thin wire.

Answer : Overload relays are of induction, solid state, thermal, electromagnetic type.

Description : Shunt compensation in an EHV line is used to (A) Improve stability. (B) Improve the voltage profile. (C) Reduce the fault level. (D) Substitute for synchronous phase modifier.

Answer : Shunt compensation in an EHV line is used to Improve the voltage profile.

Description : Series capacitive compensation in EHV transmission line is used to

Answer : To maintain voltage stability 

Description : The ALE line of an 8085 microprocessor is used to (A) latch the output of an I/O instruction into an external latch. (B) deactivate the chip-select signal from memory devices. (C) find the interrupt ... of the TRAP interrupt. (D) latch the 8 bits of address lines AD7-AD0 into an external latch.

Answer : The ALE line of an 8085 microprocessor is used to latch the 8 bits of address lines AD7-AD0 into an external latch.

Description : What are the five types of single phase motors used in the industry?

Answer : Relays can be designed to respond to changes in resistance, reactance or impedance voltage and current, light intensity, temperature.

Answer :  Sandwich type winding is used in 3 phase shell-type transformer.

Description : Consider the following statements. Which of these statements are correct ?  (1) Reactance relays are preferred for ground fault relaying  (2) Impedance relays are most suitable for:protecting long transmission lines  (3) Mho relays are best ... (1) and (3) (C) (2) and (4) (D) (1), (2) and (4)

Answer : Consider the following statements. Which of these statements are correct ?  (1) Reactance relays are preferred for ground fault relaying  (2) Impedance relays are most suitable for:protecting long transmission lines  (3) Mho relays are ... (1) and (3) (C) (2) and (4) (D) (1), (2) and (4)

Description : Reactance relays are employed for Phase faults in : (A) Short lines (B) Medium lines (C) Long lines (D) Any line

Answer : Reactance relays are employed for Phase faults in : Short lines

Description : How many types of types of relays are there?

Description : Why is AC better for long distance power transmission than DC ?

Answer : ac is more economical to transmit for long distances . wires can be made smaller by step up transformer .. since major cost are wires to transmit .. then at the end of distance step down transformer is used for commercial use.

Description : The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA

Answer : Power for lighting in passanger coach, in a long distance electric train, is provided through individual generator of bogie and batteries.

Description : The reactive power transfer over a line mainly depends on

Answer : The reactive power transfer over a line mainly depends on lVsl- lVRl

Answer : When a wave propagates on a transmission line, it suffers reflection several times at sending and other end.

Answer : When a transmission line is energized, the wave that propagates on it is current wave and voltage wave.

Description : The surge impedance for over head line is taken as  (1) 10-20 ohms (2) 50-60 ohms (3) 100-200 ohms (4) 1000-2000 ohms

Answer : The surge impedance for over head line is taken as 100-200 ohms

Answer : A cumulatively compounded long shunt generator when operating as a motor would be differentially compounded long shunt.

Description : The sending end and receiving end voltages of a three-phase transmission line are 10 kV/ph and 9.5 kV/ph, respectively. If the resistance drop is 150 V/ph and receiving end power factor is 0.8, the sending end power factor is (A) 0.745 lagging (B) 0.775 lagging (C) 0.8 lagging (D) 0.85 lagging

Answer : Vscos¢s-Vrcos¢r=IR

Description : A lightening arrester connected between the line and earth in a power system  (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct ... suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it

Answer : A lightening arrester connected between the line and earth in a power system protects the terminal equipment against travelling surges

Description : lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is

Answer : lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is terminated into a resistance equal to surge impedance of the line

Description : Transmission efficiency of a transmission line increases with the

Answer : Transmission efficiency of a transmission line increases with the increase in power factor and voltage

Answer : The inductive interference between power and communication line can be minimized by transposition of the power line, transposition of the communication line.

Answer : The interaction between a transmission line and communication line is minimized by transposing transmission as well as communication lines, increasing the height of the transmission line tower, increasing the distance between the two lines.

Answer : A transmission line is protected by distance protection, time graded and current graded overcurrent protection.

Description : For a balanced three phase star connected load for which line voltage is 230V and per phase resistance and reactance is 6 Ohm and 8 Ohm respectively. Calculate: 1) phase voltage 2) line current 3) power factor 4) total power absorbed

Description : Regulating-transformers are used in power systems for control of

Answer : Regulating-transformers are used in power systems for control of power flow

Description : Surge absorbers are used for protection against

Answer : Surge absorbers are used for protection against low voltage high frequency oscillations

Description : In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line 

Answer : In a transmission line if booster transformers are to be used, preferred location will be At the intermediate point

← Prev Question Next Question →
editChoose topic
...