The current zero interruption, in oil and air blast circuit breakers, is achieved by?

1 Answer

The current zero interruption, in oil and air blast circuit breakers, is achieved by lengthening of the gap, cooling and blast effect.
Like 0 like Dislike 0 dislike

Related questions

Answer : Air blast circuit breakers for 400 kV power system are designed to operate in 50 millisecond.

Answer : Air blast circuit breaker is used for repeated duty.

Answer : The time of closing the cycle, in modern circuit breakers is 0.003 sec.

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Description : The following is/are the characteristics of SF6 circuit breakers:  (A) It does not need an auxiliary breaking chamber (B) Short break time of 2 to 2.5 cycles (C) All of the above (D) None of the above

Answer : The following is/are the characteristics of SF6 circuit breakers:  (A) It does not need an auxiliary breaking chamber (B) Short break time of 2 to 2.5 cycles (C) All of the above (D) None of the above

Answer : Circuit breakers are essentially current carrying contacts called electrodes.

Answer : Circuit breakers usually operate under transient state of short-circuit current.

Description : The arc temperature in Oil Circuit Breaker may reach up to_______.  (A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above

Answer : The arc temperature in Oil Circuit Breaker may reach up to 5,000° K 

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

Description : ln a minimum oil circuit breaker the oil is used

Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Description : What is the maximum number of circuit breakers in a panel?

Answer : It depends on that which type of panel is this.

Description : Magnetic circuit breakers use _________ A) Permanent magnets B) Earth magnets C) Solenoid D) All the above

Answer : Magnetic circuit breakers use Solenoid 

Answer : Oil switches are employed for high voltages and large currents circuits.

Description : Define Dielectric Strength for transformer oil. State its value for new transformer oil.

Description : The dielectric strength of transformer oil is expected to be?

Answer : The dielectric strength of transformer oil is expected to be 33 kV.

Description : In general AC distribution systems, arc interruption in vacuum circuit breakers are designed to function in a time period of (a) One cycle (b) Two to three cycles (c) Within ten cycles (d) None of the above

Answer : In general AC distribution systems, arc interruption in vacuum circuit breakers are designed to function in a time period of One cycle

Description : In which fault the maximum short circuit current occurs?

Answer : In three phase bolted fault the maximum short circuit occurs.

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Description : Explain fuel system and air intake system in diesel electric power plant.

Answer : Fuel system and air intake system in diesel electric power plant :  Fuel system: It consists of storage tank, strainers, fuel transfer pump and all day fuel tank. The fuel oil is supplied ... Filters are provided to remove dust particles from air which may act as abrasive in the engine cylinder.

Description : Compare reciprocating and rotary air compressor

Answer : Reciprocating compressor Rotary compressor  1. Compression of air takes place with help of piston and cylinder arrangement with reciprocating motion of piston. 1. Compression of air takes place ... High 12. More Starting torque required 12. Less Starting torque required

Description : Graph indicating changes in pollutants level w.r.t air fuel ratio

Answer : Graph indicating changes in pollutants level w.r.t air fuel ratio

Description : Why is it necessary to keep air gaps in magnetic circuits as small as possible?

Description : An air gap is usually inserted in magnetic circuits to?

Answer : An air gap is usually inserted in magnetic circuits to prevent saturation.

Answer : Two-value capacitor motor finds increased application as compressor motor in small home air-conditioners because it has low starting as well as running currents at relatively high power factor.

Description : Wall-mounted air conditioners: what to consider when choosing?

Answer : Home and office climatic equipment in practice is mainly represented by wall-mounted air conditioners or split systems. The variety of design of split-systems allows not only to successfully fit ... are the famous Japanese brands Daikin, Mitsubishi Electric, Toshiba, General, Fujitsu and Panasonic.

Description : What is an air ionizer for?

Answer : In recent years, air ionizers have become more and more popular in the household appliances market . And this is quite justified, because their use can significantly improve air quality and minimize the ... advice and, together with a doctor, decide on the possibility of further use of the device.

Description :  applications of compressed air

Answer : 1) To drive air motors in coal mines. 2) To inject fuel in air injection diesel engines. 3) To operate pneumatic drills, hammers, hoists, sand blasters. 4) For cleaning purposes. 5) To cool large ... and farm maintenance. 7) In vehicle to operate air brake. 8) For spray painting in paint industry.

Description : State the functions of following elements: i) Diesel engine system ii) Air intake system iii) Engine exhaust system iv) Engine starting system.

Answer : i) Diesel engine system:-  Four strokes Two strokes ii) Air intake system:- Air intake system is provided to supply air to engine cylinder for fuel combustion.  iii) Engine exhaust system ... provided to rotate the engine initially until the firing starts and engine run under its own power. 

Description : Describe with neat diagram air friction damping. 

Answer : Air Friction Damping: Here air trapped in the chamber works as damping medium for the piston movement connected to the spindle. The piston moves in the air chamber. The clearance between piston and ... will be the damping torque, bringing the pointer to the equilibrium position quickly. 

Description : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Answer : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Answer : Susceptibility of the air medium is zero.

Answer : Natural air cooling is generally restricted for transformers up to 1.5 MVA .

Answer : Ionization in circuit breaker is facilitated by high temperature, increase of mean free path, increasing field strength.

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Description : Write down specification and applications of Air blast C. B. and Vacuum C. B.

Answer : Specifications of Circuit Breaker: i) Service type: Indoor / Outdoor ii) No. of Poles: 1 or 3 iii) Nominal System Voltage: iv) Highest System Voltage: v) Rated normal current; vi) ... Vacuum Circuit Breaker: Vacuum circuit breakers are used in electrical systems operating at 11kV, 25kV and 33kV.

Description : The number of cycles in which a high speed circuit breaker can complete its operation is  (A) 3 to 8 (B) 10 to 18 (C) 20 to 30 (D) 40 to 50

Answer : The number of cycles in which a high speed circuit breaker can complete its operation is 3 to 8

Answer : A fuse in a motor circuit provides protection against short-circuit and overload.

Answer : Arc in a circuit breaker is interrupted at zero current.

Answer : The short circuit in any winding of the transformer is the result of impulse voltage.

Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.

Answer : In a circuit breaker the basic problem is to transmit large power.

Description : Arc in a circuit behaves as?

Answer : Arc in a circuit behaves as a resistance decreasing with voltage rise across the arc.

Answer : The arcing contacts in a circuit breaker are made of copper tungsten alloy.

Description : For selecting a circuit breaker, ______ should be determined.  (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

Answer : For selecting a circuit breaker, ______ should be determined. (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

Answer : The voltage appearing across the contacts after opening of the circuit breaker is called recovery voltage.

Answer : Magnetic circuit breaker has instantaneous trip action.

Answer : Thermal circuit breaker has delayed trip action.

Description : what is SF6 circuit breaker?

Answer : A circuit breaker in which SF6 under pressure gas is used toextinguish the arc is calledSF6 circuit breaker. SF6 (sulphur hexafluoride) gas has excellent dielectric , arc quenching, chemical and other physical properties and has proved its ...

Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose [email protected]

← Prev Question Next Question →
Ask a Question
Choose topic