1 Answer

Magnetic circuit breaker has instantaneous trip action.

Like 0 like Dislike 0 dislike

Related questions

Description : For selecting a circuit breaker, ______ should be determined.  (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

Answer : For selecting a circuit breaker, ______ should be determined. (A) initial current that flows on occurrence of a short circuit only (B) transient current that flows at the time of circuit interruption only (C) resonant frequency only (D) (A) and (B) 

Answer : Thermal circuit breaker has delayed trip action.

Description : The arc temperature in Oil Circuit Breaker may reach up to_______.  (A) 5,000° K (B) 8,000° K (C) 10,000° K (D) None of the above

Answer : The arc temperature in Oil Circuit Breaker may reach up to 5,000° K 

Description : The number of cycles in which a high speed circuit breaker can complete its operation is  (A) 3 to 8 (B) 10 to 18 (C) 20 to 30 (D) 40 to 50

Answer : The number of cycles in which a high speed circuit breaker can complete its operation is 3 to 8

Description : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Answer : A circuit breaker is designed to protect an electrical circuit from damage caused by :  (A) Over load (B) Short circuit (C) Over current (D) All of the above

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

Description : ln a minimum oil circuit breaker the oil is used

Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Answer : Arc in a circuit breaker is interrupted at zero current.

Answer : The arc voltage produced in A.C. circuit breaker is always in phase with the arc current.

Answer : In a circuit breaker the basic problem is to transmit large power.

Answer : Ionization in circuit breaker is facilitated by high temperature, increase of mean free path, increasing field strength.

Answer : The voltage appearing across the contacts after opening of the circuit breaker is called recovery voltage.

Answer : Air blast circuit breaker is used for repeated duty.

Answer : The arcing contacts in a circuit breaker are made of copper tungsten alloy.

Description : what is SF6 circuit breaker?

Answer : A circuit breaker in which SF6 under pressure gas is used toextinguish the arc is calledSF6 circuit breaker. SF6 (sulphur hexafluoride) gas has excellent dielectric , arc quenching, chemical and other physical properties and has proved its ...

Description : Explain working of static AC circuit breaker. 

Answer : Static AC Circuit breaker: The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

Description : Explain working of AC circuit breaker using SCR with circuit diagram.

Answer : AC Circuit Breaker:  The circuit configuration of static AC circuit breaker using SCR is shown in the figure. When switch S' is closed, the SCRs T1 and T2 are fired in positive ... to non-availability of gate current. Thus the maximum time delay for breaking the circuit is one half-cycle.

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

Description : Breaking capacity of a circuit breaker is usually expressed in terms of  (1) Ampere (2) Volts (3) MW (4) MVA

Answer : Breaking capacity of a circuit breaker is usually expressed in terms of MVA

Description : The arc voltage in a circuit breaker is :

Answer : The arc voltage in a circuit breaker is : in phase with the arc current

Description : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Answer : Which of the following is used in a circuit breaker as the medium in which the arc forms? A) Insulating gas B) Insulating oil C) Vacuum D) All the above

Description : Why does leakage occur in a magnetic circuit?

Description : Important Terms in Magnetic Circuit

Answer : Important Terms in Magnetic Circuit

Description : Magnetic Circuit and its Analysis

Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : State and explain Ohm's law for magnetic circuit.

Answer : Ohm's law for electric circuit is V = I R where V is voltage, I is current, R is Resistance. Ohm's law for magnetic circuit is MMF = Φ X S where MMF is magnetomotive force (NI) ... . Resistance is the opposition to the flow of current while reluctance is the opposition to the flow of magnetic flux.

Description : Compare electric and magnetic circuit.

Answer : Comparison between Magnetic and Electric Circuits

Description : Define magnetic circuit. Draw simple series magnetic circuit.

Description : Magnetic circuit breakers use _________ A) Permanent magnets B) Earth magnets C) Solenoid D) All the above

Answer : Magnetic circuit breakers use Solenoid 

Description : Permeability in a magnetic circuit corresponds to______ in an electric circuit.

Answer : Permeability in a magnetic circuit corresponds to conductivity in an electric circuit.

Description : Charging Action of capacitor

Answer : Charging Action of capacitor .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : A magnetic circuit has effective iron length of 100 cm and it is wound with 800 turns of wire carries 1 A. Find the magnetic field strength.

Answer : magnetic field strength

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Description : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Answer : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Description : At ______ frequencies the parallel R-L circuit behaves as purely resistive.

Answer : At very high frequencies the parallel R-L circuit behaves as purely resistive.

Description : Magnetic and Non-magnetic Materials

Answer : We have now looked at a number of ways in which matter can be grouped, such as into metals, semi-metals and non-metals; electrical conductors and insulators, and thermal conductors and insulators. ... information must be stored, in computers and TV's, as well as in generators and electric motors.

Description : Why does the magnetic field flow from north to south?

Description : State the material used for making (1) Magnetic Core (2) Fuse element  

Answer : The material used for making of:  (1) Magnetic Core : Iron, cobalt, Nickel, CRGO, HRGO , silicon steel  (2) Fuse Element: Tin- lead wire, Tinned copper wire 

Description : Electro Magnetic Induction

Answer : Electro Magnetic Induction

Description : Why is it necessary to keep air gaps in magnetic circuits as small as possible?

Description : Explain with neat diagram series and parallel magnetic circuits. 

Answer : Series magnetic circuit: When different magnetic materials having different lengths, cross sectional areas and permeability are connected one after another, in which same flux is established in different sections, then it is called series ... flux, Φ = Φ1 + Φ2  Path 1: BAFE  Path 2: BACD

Description : Series Magnetic Circuits

Description : Define magnetic permeability. State and explain the factors affecting permeability of magnetic materials

Answer : Permeability : The capability of the magnetic material to conduct the magnetic flux is known as permeability. Permeability and hysteresis loss are inversely related to each other. Factors ... impurities affect the geometric pattern of the crystals and are harmful to the magnetic property. 

Description : What arc the errors occurring in measuring devices due to stray magnetic field and temp '? Explain how to compensate them.

Answer : 1. Error due to stray magnetic fields-   Main magnetic field gets disturbed by external magnetic fields known as stray magnetic fields.  2. Compensation technique   To avoid this error, ... resistance alloy having a negligible resistance temp coefficient in the ratio of 1:10 for pressure coil 

Description : Explain magnetic effect employed in measuring instrument.

Answer : Magnetic Effect:  I) In PMMC meters:  ➢ When a current is passed through a conductor, magnetic field is produced round the conductor. Due to this field when current ... field it experiences a mechanical force.  Examples: Electrodynamometer type instruments, Induction type instrument. 

Description : Define the following terms: i) Magnetic flux density, ii) Reluctance, iii) Magneto-motive force, iv) Permeance.

Answer : (i) Magnetic flux density (B): It is the magnetic flux per unit area measured at right angles to the flux path. (Its unit is weber/m2 or tesla).  (ii) Reluctance: It is the ... flux to set up through it and it is reciprocal of reluctance. Permeance = 1/ Reluctance. Unit: weber/ampere.

Description : Derive an expression for energy stored in a magnetic field . 

Answer : Expression for energy stored in a magnetic field: The energy is stored in magnetic field when current increases and return back when the current decreases. At instant t' seconds after closer of switch ... energy absorbed by the magnetic field when current increases from 0 to I amperes 

Description : What is magnetic hysteresis? What is the cause of hysteresis?

Answer : Magnetic hysteresis: When a magnetic material is subjected to cycle of magnetization, it is found that flux density (B) in the material lags behind applied magnetizing force (H). This ... the movement of orientation, due to which the flux density lags behind the magnetic field intensity.

Description : Define magnetic lines of force. Also draw and show magnetic lines of force of a bar type magnet.

Answer : Magnetic Lines of force- These are the imaginary lines (having no physical existence) introduced by Faraday for the pictorial representation of the distribution of a magnetic field.  OR  A line of ... that the tangent at any point gives direction of the resultant force at that point. 

Description : Classify magnetic materials and explain in brief.

Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { ... the absence of external magnetic field. Following are the ferromagnetic materials: Iron, Cobalt, Nickel.

Description : Give the relation between magnetic field strength, magnetic flux density and permeability.

← Prev Question Next Question →
Ask a Question
Choose topic