Ask or Answer

🏠 Home🏷️ Tags❔ Ask✔️ AnswerUsers

Please log in or register to answer this question.

1 Answer

Answer :

The transformer laminations are insulated from each other by thin coat of varnish.

Like 0 like

Related Questions

Last Answer : In a power or distribution transformer about 10 percent end turns are heavily insulated to withstand the high voltage drop due to line surge produced by the shunting capacitance of the end turns.

Show Answer

Description : 77 The transformer laminations are insulated from each other by A. Mica strip B. Thin coat of varnish C. Paper D. Any of the above

Last Answer : B. Thin coat of varnish

Show Answer

Last Answer : The thickness of laminations used in a transformer is usually 0.4 mm to 0.5 mm.

Show Answer

Last Answer : Silicon steel used in laminations mainly reduces hysteresis loss.

Show Answer

Description : 19 Transformer cores are built up from laminations rather than from solid metal so that A. Oil penetrates the core more easily B. Eddy current loss is reduced C. Less lamination is required for the windings D. Turn ratio is higher than voltage ratio

Last Answer : B. Eddy current loss is reduced

Show Answer
Show MoreAsk QuestionNext Page →