Reduction in core losses and increase in permeability are obtained with transformer employing?

1 Answer

Reduction in core losses and increase in permeability are obtained with transformer employing core built-up of laminations of cold rolled grain oriented steel.
Like 0 like Dislike 0 dislike

Related questions

Description : In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are?

Answer : In a given transformer for a given applied voltage, losses which remain constant irrespective of load changes are hysteresis and eddy current losses.

Description : State any four characteristics of core type transformer.

Answer : Characteristics of core type transformer: i) It has one window. ii) It has one magnetic circuit. iii) Core surrounds the winding. iv) Average length of core is more. v) Area of cross ... Better cooling for winding. vii) Mechnical strength is comparatively less. viii) Repair and maintenance is easy.

Answer : Material used for construction of transformer core is usually silicon steel.

Description : When secondary of a current transformer is open-circuited its iron core will be?

Answer : When secondary of a current transformer is open-circuited its iron core will be hot because of heavy iron losses taking place in it due to high flux density.

Description : The size of a transformer core will depend on?

Answer : The size of a transformer core will depend on frequency and area of the core.

Description : The desirable properties of transformer core material are  (1) low permeability and low hysteresis loss. (2) high permeability and high hysteresis loss. (3) high permeability and low hysteresis loss. (4) low permeability and hysteresis loss.

Answer : The desirable properties of transformer core material are high permeability and low hysteresis loss.

Description : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is

Answer : A 40 kVA transformer has a core loss of 400 W and a full load copper loss of 800 W. The proportion of full load at maximum efficiency is 0.707

Description : Explain the electrical losses of magnetic materials used for the cores of inductors and transformer.

Description : The core construction is like spokes of a wheel in following transformer:  (A) Berry Type Transformer (B) Core Type Transformer (C) Shell Type Transformer (D) None of the above

Answer : The core construction is like spokes of a wheel in following transformer:  Berry Type Transformer

Description : The main purpose of using core in a transformer is to (A) decrease iron losses (B) eliminate magnetic hysteresis (C) reduce reluctance of the common magnetic circuit (D) prevent eddy current loss

Answer : Reduce Relucatnce of the common magnetic circuit.

Description : Why does the core of a transformer need to be laminated?

Answer : Transformer cores are laminated to reduce eddy current loss.

Answer : Transformer core is laminated to reduce Eddy current losses.

Description : Auto-transformer makes effective saving on copper and copper losses, when its transformation ratio is?

Answer : Auto-transformer makes effective saving on copper and copper losses, when its transformation ratio is approximately equal to 1.

Description : For given applied voltage, with the increase in frequency of the applied voltage?

Answer : For given applied voltage, with the increase in frequency of the applied voltage eddy current loss will remain unchanged.

Description : (a) Define permeability. (b) Define MMF. (c) Define form factor of an alternating quantity. (d) Define frequency and time period of an alternating quality. (e) Define transformation ratio of transformer. ... and state the meaning of each term used. (g) Give two applications of single phase motors. 

Answer : Permeability : It is the ability of a magnetic/Non magnetic material to allow setting up of flux in it.  MMF : The magneto motive force (MMF) is the force required to setup flux in a magnetic / ... applications of single phase motors : Water pumps, ceiling fan, lathe machine

Description : Losses which occur in rotating electric machines and do not occur in transformers are?

Answer : Friction losses windage losses 

Answer : When a bogie negotiates a curve, reduction in adhesion occurs resulting in sliding. Thus sliding is acute when wheel base of axles is more, degree of curvature is more.

Description : State the need for reduction of harmonics in inverters. Enlist the various methods for reduction of harmonics in inverter output.

Description : Purpose of Selective Catalytic Reduction (SCR)

Answer : Purpose of Selective Catalytic Reduction (SCR) : 1. It reduces Nox 75% to 90% 2. Converts it in to molecular nitrogen and water vapor 3. It reduces HC emission up to 80% 4. It reduces PM emission 20 to 25%.

Answer : The purpose of providing an iron core in a transformer is to decrease the reluctance of the magnetic path.

Answer : The purpose of providing iron core in a step-up transformer is to decrease the magnitude of magnetizing current.

Answer : The core used in high frequency transformer is usually air core .

Description : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is (A) 1.125 cm (B) 1.5 cm (C ) 2 cm (D) 8 cm

Answer : A single core lead sheathed cable with two dielectrics of permittivity 4 and 3, respectively, are subjected to same maximum stress. If the conductor diameter is 1.5 cm, the outer diameter of the first dielectric is 2 cm 

Description : Define magnetic permeability. State and explain the factors affecting permeability of magnetic materials

Answer : Permeability : The capability of the magnetic material to conduct the magnetic flux is known as permeability. Permeability and hysteresis loss are inversely related to each other. Factors ... impurities affect the geometric pattern of the crystals and are harmful to the magnetic property. 

Description : Give the relation between magnetic field strength, magnetic flux density and permeability.

Description : State the values of permeability of free space and relative permeability of air.

Answer :  The size of a synchronous motor decreases with the increase in flux density.

Description : Permeability in a magnetic circuit corresponds to______ in an electric circuit.

Answer : Permeability in a magnetic circuit corresponds to conductivity in an electric circuit.

Description : Permeability formula

Answer : Permeability formula

Description : Define permeability.

Answer : Permeability is the ability with which the magnetic material forces the magnetic flux through a given medium. Permeability is the magnetic property of the medium. The flow of flux in a magnetic ... field strength (H) is same for both. Relative permeability is unitless it has no dimensions.

Description : The magnetic permeability of a diamagnet is _________ A) More than that of vacuum B) Same as that of vacuum C) Less than that of vacuum D) 3.14 times that of vacuum

Answer : The magnetic permeability of a diamagnet is Less than that of vacuum 

Description : Relative permeability of vacuum is?

Answer : Relative permeability of vacuum is 1.

Description : The relative permeability of a ferromagnetic material is?

Answer : The relative permeability of a ferromagnetic material is more than 100 or 1000.

Description : What are three ways you can increase the strength of an electromagnet?

Description : In a synchronous motor which losses varies with load?

Answer : In a synchronous motor, copper losses varies with load.

Description : In synchronous motor, does the winding losses vary with load?

Answer : No, in the synchronous motor the winding losses do not vary with load.

Description : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is (A) 28.2 mm (B) 26.4 mm (C) 24.4 mm (D) 22.0 mm

Answer : A single core cable is designed to work for a single phase system with a peak voltage of 220 kV. The maximum permissible stress in the dielectric is not to exceed 20 kV/mm. For economical size, the overall core diameter of the cable is 22.0 mm

Description : What will happen if you increase the current in the motor?

Answer : Increasing current means increasing frequency of the motor because current is directly proportional to rotations of the motor rotor

Description : Why does increase in current mean a decrease in voltage?

Answer : This is because current flows from high potential to low potential to bring the two diffrent potential to unity , thus  a reduced potential (voltage)

Description : In DC generators lamination core are generally made of?

Answer : In DC generators lamination core are generally made of silicon steel.

Description : How can we increase the induced current?

Answer : Induced  current  can  be  increased by  reducing  no  of   windings  on  the  secondary  part   compared   to   primary.

Description : The friction losses in Real Transformers are :  (A) 0% (B) 5% (C) 25% (D) 50%

Answer : A

Description : In DC motor iron losses are occurred in?

Answer : In DC motor iron losses are occurred in the armature.

Answer : Iron losses in a D.C. machine are independent of variations in load.

Answer : In case of D.C. machines, mechanical losses are primary function of speed.

Description : What are the losses in a transmission line?

Description : What are the types of power losses in inductor?

Answer : Copper losses, Eddy current loss, and hysteresis loss are the types of power losses in inductor.

Answer : Iron loss, copper loss and mechanical losses these are the losses in DC machine.

Description : Core type transformers are popular in___________.  (A) High voltage applications (B) Low voltage applications (C) All of the above (D) None of the above

Answer : Core type transformers are popular in High voltage applications

Description : During short circuit test iron losses are negligible because?

Answer : During short circuit test iron losses are negligible because the voltage applied on primary side is low.

← Prev Question Next Question →
Ask a Question
Choose topic