menu search
person
Please log in or register to answer this question.
Draw and explain block diagram of electronic communication system.
thumb_up_alt 0 like thumb_down_alt 0 dislike
51 views

1 Answer

Block diagram of electronic communication system.

image

Explanation

Transducer: A transducer is usually required to convert the output of a source into an electrical signal that is suitable for transmission. For example, a microphone serves as the transducer that converts an acoustic speech signal into an electrical signal.

 Transmitter: The transmitter converts the electrical signal into a form that is suitable for transmission through the physical channel or transmission medium. For example, in radio and TV broadcast, the transmitter must translate the information signal to be transmitted into the appropriate frequency range that matches the frequency allocation assigned to the transmitter. There is some internal noise available inside the transmitter section due to the electronic circuits used which is called thermal noise due to heat dissipation and other noises etc.

Channel: The communications channel is the physical medium that is used to send the signal from the transmitter to the receiver. In wireless transmission, the channel is usually the atmosphere (free space).

Receiver: The function of the receiver is to recover the message signal contained in the received signal. If the message signal is transmitted by carrier modulation, the receiver performs carrier demodulation in order to extract the message from the sinusoidal carrier. There is some internal noise available inside the receiver section due to the electronic circuits used which is called thermal noise due to heat dissipation and other noises etc.

Output Transducer: The output transducer converts electrical signal in to sound signal.  

thumb_up_alt 0 like thumb_down_alt 0 dislike
← Prev Question Next Question →

Related questions

Description :

Draw block diagram of basic electronic communication system and state the function of each block.

Answer :

i) Input signal: - The information can be in the form of sound, picture or data coming from computer. ii) Input transducer: - it converts original information into equivalent electrical ... back to suitable form. vii) Output transducer: - It converts electrical signal into original form. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
6 views 1 answer
Description :

Describe the block diagram of basic communication system.

Answer :

Describe the block diagram of basic communication system.

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

Draw the basic block diagram of Electronic communication system. State the function of transmitter.

Answer :

Block diagram: Transmitter The function of the transmitter is to process the electrical signal from different aspects. For example in radio broadcasting the electrical signal obtained from sound ... the message signal are done just to ease the transmission of the signal through the channel.

thumb_up_alt 0 like thumb_down_alt 0 dislike
14 views 1 answer
Description :

Draw block diagram of FM receiver and explain the use of limiter circuit.

Answer :

Diagram Explanation Amplitude limiter: The function of amplitude limiter is to remove all amplitude variation of FM carrier voltage that may occur due to atmospheric disturbances. Use of amplitude limiter makes the system less noisy.

thumb_up_alt 0 like thumb_down_alt 0 dislike
4 views 1 answer
Description :

Draw the TRF receiver block diagram and explain its working. 

Answer :

Explanation:- 1. TRF receivers are simple and having high sensitivity. The AM transmission takes place in MW band and SW band. MW frequency range is 540KHz to 1640KHz. 2. ... power level to drive the loudspeaker. 7. The loudspeaker converts electrical signal into original sound information.

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

Draw the block diagram of AM transmitter, explain its operation.

Answer :

AM transmitter is of two types i)High Level AM Transmitter ii)Low Level AM Transmitter i) RF crystal oscillator: It is a source of carrier signal of desired frequency. The circuit is ... AM signal is then applied to the transmitting antenna which radiates this AM signal into air or space. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
2 views 1 answer
Description :

Draw the block diagram of digital communication system.Explain the function of source encoder and channel encoder.

Answer :

Source Encoder : The input to the source encoder (also referred to as the source coder) is a string of symbols occurring at a rate symbols/sec. The source encoder converts the ... it possible for the receiver to detect and/or correct some of the errors in the information bearing bits.

thumb_up_alt 0 like thumb_down_alt 0 dislike
18 views 1 answer
Description :

Draw the block diagram of FM super heterodyne radio receiver with waveforms.

Answer :

block diagram of FM super heterodyne radio receiver

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

Draw the block diagram of PWM. List its advantages 

Answer :

Block diagram of PWM:- Advantages of PWM:- 1. More immune to noise. 2. Synchronization between transmitter and receiver is not required. 3. Possible to separate out signal from noise.

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

Explain with block diagram of Armstrong method of FM generation.

Answer :

Explanation:- The crystal oscillator generates the carrier at low frequency typically at 1 MHz this is applied to the combining network and a 90o phase shifter. The modulating signal is passed through an ... power amplifier to raise the power level of the FM signal.  Phasor Diagram:-   

thumb_up_alt 0 like thumb_down_alt 0 dislike
9 views 1 answer
Description :

State and explain the types of noise in communication system.

Answer :

External Noise:  Atmospheric Noise  Atmospheric noise or static is caused by lighting discharges in thunderstorms and other natural electrical disturbances occurring in the atmosphere. These ... between two or more paths, and results from the random fluctuations in the division.

thumb_up_alt 0 like thumb_down_alt 0 dislike
22 views 1 answer
Description :

Draw the circuit diagram of practical diode detector and explain its working. 

Answer :

Circuit diagram of practical diode detector:  Explanation- The circuit operates in the following manner- The diode has been reversed so that now the negative envelope is demodulated. Due to this ... to produce AGC voltage. The DC AGC voltage is proportional to the amplitude of AM signal. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
1 view 1 answer
Description :

Draw the circuit diagram of limiter and explain its working.

Answer :

Circuit diagram of amplitude limiter:- Explanation:- 1. In frequency modulation, the signal amplitude is held constant while the carrier frequency is varied. 2. Any noise that contaminates ... V p-p instead of the alternately driven into saturation and cutoff, it limits the signal amplitude

thumb_up_alt 0 like thumb_down_alt 0 dislike
1 view 1 answer
Description :

Draw the circuit diagram of varactor diode FM modulator and explain its working.

Answer :

Varactor diode modulator is the direct method of FM generation wherein the carrier frequency is directly varied by the modulating signal. A varactor diode is a semiconductor diode whose ... the magnitude of frequency change is proportional to the amplitude of the modulating signal voltage.

thumb_up_alt 0 like thumb_down_alt 0 dislike
2 views 1 answer
Description :

List the types of noise in communication system. Explain any one of them.

Answer :

Explanation of External Noise:- Atmospheric Noise:- Atmospheric noise or static is caused by lighting discharges in thunderstorms and other natural electrical disturbances occurring in the atmosphere ... between two or more paths, and results from the random fluctuations in the division. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
9 views 1 answer
Description :

Draw circuit diagram of transistor reactance modulator. Explain its working.

Answer :

Explanation- A reactance modulator is illustrated in figure. It is basically a standard commonemitter class A amplifier. Resistors R1 and R2 from a voltage divider to bias ... frequency, whereas a lower capacitance increases the frequency. The circuit produces direct frequency modulations.

thumb_up_alt 0 like thumb_down_alt 0 dislike
1 view 1 answer
Description :

Draw the diagram for PAM generation using transistors. Explain its working.

Answer :

Explanation:-1. Transistor Q1 is used in the active region so it has been provided with DC biasing to its base. 2. Modulating signal is applied to the base of transistor Q1 3. In the emitter of ... . 7. In the time interval between sampling pulses output is zero. Thus we get the output as PAM.

thumb_up_alt 0 like thumb_down_alt 0 dislike
1 view 1 answer
Description :

Explain with neat sketch block diagram of optical fiber communication system and list out sources and detectors suitable for it.

Answer :

OR 1. The light source is normally an infrared LED or LASER device which is driven by the current value from the V to I convertor. It emits light which is proportional ... optical energy electrical signal. The light detectors which are used as PIN photodiode and avalanche photo diode.

thumb_up_alt 0 like thumb_down_alt 0 dislike
18 views 1 answer
Description :

Explain digital communication system with the help of block diagram.

Answer :

Block diagram of digital communication system:- Explanation:- DISCRETE INFORMATION SOURCE: The information to be transmitted originates here. These information/messages may be available in digital ... its output, a replica of the output of the digital source at the transmitting end. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
7 views 1 answer
Description :

Draw the block diagram of TDMA system and explain its working.

Answer :

Block diagram of TDMA system:- OR Explanation:- In TDMA, each user has all the bandwidth, all the power and part of the time. It is frequently used with data and ... receives the bursts from all other earth stations and must select from them the traffic destined only for itself.

thumb_up_alt 0 like thumb_down_alt 0 dislike
12 views 1 answer
Description :

Draw the block diagram of instrumentation system and explain function of each block. 

Answer :

Functions of each block: Primary sensing element: This first receives energy from the measured medium and produces an output depending on measured quantity. Variable conversion element: Converts ... indication of a pointer moving a scale or the recording of a pen Moving over chart.

thumb_up_alt 0 like thumb_down_alt 0 dislike
20 views 1 answer
Description :

Draw the labeled block diagram of process control system and explain each block.

Answer :

Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

thumb_up_alt 0 like thumb_down_alt 0 dislike
214 views 1 answer
Description :

Draw the block diagram of satellite sub-system and explain power subsystem.

Answer :

POWER SUBSYSTEM- This system provides the necessary DC power to the satellite. All communication satellites derive their electrical power from solar cells. There is also a battery backup facility used during ... . to d.c. converter is used to raise the level of low voltages to high voltage.

thumb_up_alt 1 like thumb_down_alt 0 dislike
3.0k views 1 answer
Description :

Draw and explain general block diagram of Robotic system.

Answer :

Explanation : An Industrial robot has basic parts like arm, sensor, actuators, controllers etc. There subsystem communicates among them via, interface, whose function consists basically of decoding ... form of feedback signals. This is compared with the predefined task given to the controller

thumb_up_alt 0 like thumb_down_alt 0 dislike
2.6k views 1 answer
Description :

Describe the block diagram of FM superhetrodyne receiver

Answer :

RF amplifier:- There are two important functions of RF amplifier: 1) To increase the strength of weak RF signal. 2) To reject image frequency signal. In FM broadcast the ... FM broadcast, the maximum modulating frequency is 15 kHz. Hence the audio amplifier must have large bandwidth.

thumb_up_alt 0 like thumb_down_alt 0 dislike
4 views 1 answer
Description :

Draw and label the circuit diagram of ratio detector 

Answer :

Draw and label the circuit diagram of ratio detector  

thumb_up_alt 0 like thumb_down_alt 0 dislike
1 view 1 answer
Description :

 Draw a neat labeled block diagram of 3-phase Electronic Energy meter.

Answer :

Labeled diagram of 3-phase electronic energy meter:

thumb_up_alt 0 like thumb_down_alt 0 dislike
206 views 1 answer
Description :

Draw a block diagram of electronic energy meter. Write function of each block.

Answer :

Electronic Energymeter  Functions of components/blocks: - CT reduces current to reasonable value for current scaling network. - Voltage & current scaling networks reduce proportionally the voltage ... ADC converts the square wave frequency analog output to display the energy in watthour.

thumb_up_alt 0 like thumb_down_alt 0 dislike
189 views 1 answer
Description :

Draw the circuit diagram of PWM using IC555. State its operation.

Answer :

Operation: i. The timer IC555 is operated in monostable mode. ii. The negative going carrier pulses are to the differentiator formed by R1 & C1. The differentiator produces sharp negative ... . Thus PWM signal is generated at the output pin (3) of IC555 as monostablemultivibrator. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

Draw practical set-up and explain the procedure to measure selectivity of radio receiver.

Answer :

Procedure to measure selectivity of radio receiver: Throughout the measurement the receiver is kept tuned to desired frequency 950 Khz. Now the generator output frequency is deviated below ... the generator output voltage is adjusted to get a standard 50 miliwatt receiver output power.

thumb_up_alt 0 like thumb_down_alt 0 dislike
2 views 1 answer
Description :

Draw construction of Yagi-Uda antenna and explain.

Answer :

Explanation A Yagi-Uda antenna, commonly known as a Yagi antenna, is a directional antenna consisting of multiple parallel elements in a line, usually half-wave dipoles made of ... receiver with a transmission line and additional parasitic elements called reflector and one or more directors.

thumb_up_alt 0 like thumb_down_alt 0 dislike
12 views 1 answer
Description :

Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Answer :

Loop antenna:-The single turn coil carrying RF current through it having length less than the wavelength.   Advantages:- 1. highly directive 2. Small size Applications:- 1. For direction finding 2. In portable receivers 3. In navigation 

thumb_up_alt 0 like thumb_down_alt 0 dislike
5 views 1 answer
Description :

Draw and explain PLL as an FM demodulator.

Answer :

Explanation:- FM signal which is to be demodulated is applied to input of PLL.VCO output must be identical to input signal if PLL is to remain locked. As PLL is locked, VCO ... error voltage represents the modulating signal. Thus at the error amplifier output we get demodulated FM output.

thumb_up_alt 0 like thumb_down_alt 0 dislike
6 views 1 answer
Description :

Explain working of envelope detector with suitable diagram and waveform.

Answer :

Envelope Detector: An Envelope Detector is an electronic circuit that takes a high frequency signal as input and provides an output which is as envelopes of the original signal. The capacitor ... decreases the responsiveness thus, real-world designs must be optimized for the application.

thumb_up_alt 0 like thumb_down_alt 0 dislike
2 views 1 answer
Description :

Explain skip zone and skip distance with neat diagram.

Answer :

Skip distance:-Skip distance is defined as the shortest distance from a transmitter, measured along the surface of earth at which a sky wav of fixed frequency returns back to the earth. Skip zone: skip zone where signal is not detectable

thumb_up_alt 0 like thumb_down_alt 0 dislike
2 views 1 answer
Description :

In a FM system, the maximum deviation is 75KHz. Find bandwidth for modulating frequency i. fm=500Hz ii. fm=5KHz iii. fm=10KHz Draw conclusion for bandwidth of FM from answer.

Answer :

Given deviation∆=75kHz i) fm=500Hz bandwidth B.W=2(∆+fm)  =2(75k+500)=151kHz  ii). fm=5KHz bandwidth B.W=2(∆+fm)  =2(75k+5k)=160KHz iii) fm=10KHz bandwidth B.W=2(∆+fm)  =2(75k+10k)=170KHz As the modulating frequency increases bandwidth also increases.

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

Explain the working of amplitude limiter in FM receiver with circuit diagram.

Answer :

Amplitude limiter: The function of amplitude limiter is to remove all amplitude variation of FM carrier voltage that may occur due to atmospheric disturbances. Use of amplitude limiter makes the system less noisy  Circuit Diagram:

thumb_up_alt 0 like thumb_down_alt 0 dislike
1 view 1 answer
Description :

Explain with a neat diagram of ratio detector. Why limiter stage is not used before ratio detector.

Answer :

With diode D2 reversed , O is positive with respect to b, so that Vab is a sum voltage rather than the difference it was in the discriminator it is now possible to connect a large capacitor ... of limiter stage due to large capacitor C5 .Hence, limiter stage is not used in ratio detector.  

thumb_up_alt 0 like thumb_down_alt 0 dislike
3 views 1 answer
Description :

With the help of neat diagram, explain the working of phase discriminator.

Answer :

Explanation:- This discriminator is also known as the center tuned discriminator or the Foster Seeley discriminator after its inventors. It is possible to obtain the same S- Shape response curve from a circuit in ... fin = fc, fin > fc + Δf and fin<fc- Δf should be given marks

thumb_up_alt 0 like thumb_down_alt 0 dislike
6 views 1 answer
Description :

Draw block diagram of CNC system and state function of each block.

Answer :

(i) Input Devices: These are the devices which are used to input the part program in the CNC machine. There are three commonly used input devices and these are punch tape reader, magnetic ... Unit: A monitor is used to display the programs, commands and other useful data of CNC machine. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
638 views 1 answer
Description :

Draw the block diagram of an embedded system and describe the hardware units of an embedded system.

Answer :

OR Explanation: The embedded system consist of different components embedded into it as follows: 1) Embedded Processor 2) Power supply , reset and Oscillator circuits 3) System timers 4) ... to store data and program. Following are types of memories used in embedded system.

thumb_up_alt 0 like thumb_down_alt 0 dislike
3.1k views 1 answer
Description :

Draw block diagram of pneumatic system showing its basic components. State the functions of control value and air actuator.

Answer :

Diagram : Control valve: - control and regulates the direction of flow and pressure etc. Air actuator: - Air cylinders and motors are used to obtain the required movements of direction flow.

thumb_up_alt 0 like thumb_down_alt 0 dislike
584 views 1 answer
Description :

Draw the block diagram of basic wind energy conversion system and write function of each block. 

Answer :

Block diagram of basic wind energy conversion system: OR Components of wind power plant and their functions:  1) Rotor /Blade/Aero-turbine: Blade extracts significant power from the ... stronger and smoother. Towers are supports to raise the main part of the turbine up in the air.

thumb_up_alt 0 like thumb_down_alt 0 dislike
5.1k views 1 answer
Description :

Draw block diagram of OTDR and explain its working.

Answer :

Block diagram of OTDR Working principle of OTDR: A light pulse is launched into the fiber in the forward direction from an injection laser using either a ... backscattered light is detected using avalanche photodiode receiver. Output of photodiode receiver drivers an integrator.

thumb_up_alt 0 like thumb_down_alt 0 dislike
13 views 1 answer
Description :

Draw the block diagram of PCM receiver with the help of relevant wave form and explain its working

Answer :

Block diagram of PCM receiver:- Explanation:- A PCM signal contaminated with noise is available at the receive input. The regeneration circuit at the receiver will separate PCM pulses from noise ... quantized PAM signal is passed through a low pass filter recovers the analog signal x (t).

thumb_up_alt 0 like thumb_down_alt 0 dislike
7 views 1 answer
Description :

Draw the block diagram of function generator and explain its working.

Answer :

Principle of operation of function generator: Function generator operates to produce different waveforms such as sine, square, triangular of adjustable frequency which is used to test ... whose frequency is determined by the magnitude of current supplied by constant current sources.

thumb_up_alt 0 like thumb_down_alt 0 dislike
12 views 1 answer
Description :

Draw and explain the block diagram of DAS.

Answer :

Data acquisition is the process of sampling signals that measure real world physical conditions and converting the resulting samples into digital numeric values that can be manipulated by ... controlled by software programs developed using various general purpose programming languages.

thumb_up_alt 0 like thumb_down_alt 0 dislike
11 views 1 answer
Description :

Draw block diagram of CRO and explain function of each block of it. 

Answer :

The functions of various blocks are: 1) CRT: This is cathode ray tube which emits electrons that strike phosphor screen internally to provide visual display of signal. 2) VERTICAL AMPLIFIER ... are two power supplies a high voltage supply for CRT & low voltage supply for all circuits.

thumb_up_alt 0 like thumb_down_alt 0 dislike
15 views 1 answer
Description :

Draw and explain the block diagram of washing machine. State advantages of automatic washing machine.

Answer :

Explanation: The washing machines use inverter control for both washing and spin-drying. Inverter control helps reduce wash/spin noise and vibration and enables a washing machine to adjust the amount of ... limit. Advantages: 1. Time Saving 2. Effective 3. Consume less power 4. Save water

thumb_up_alt 0 like thumb_down_alt 0 dislike
1.1k views 1 answer
Description :

Draw and explain the block diagram of colour TV transmitter.

Answer :

A PAL colour TV transmitter consists of following three main sections. 1. Production of Luminance (Y) and Chrominance (U and V) signals 2. PAL encoder 3. Video and ... along with audio signal passes to the transmitting antenna through Diplexer Bridge which is a wheatstone's bridge.

thumb_up_alt 0 like thumb_down_alt 0 dislike
423 views 1 answer
...