List the types of micro-strip antennas. Explain any one of them.

1 Answer

List the types of micro-strip antennas are as fallows.






Rectangular Micro-strip Antenna:

Micro-strip Antennas are also called as patch usually consist of a metal patch on top of a grounded dielectric substrate .The patch may be in a variety of shapes, but Rectangular and Circular are common.
Micro-strip or patch antennas are becoming increasingly useful because they can be printed directly onto a circuit board. Micro-strip antennas are becoming very widespread within the mobile phone market. Patch antennas are low cost, have a low profile and are easily fabricated. 
Like 0 like Dislike 0 dislike

Related questions

Description : List the types of FM detector. Explain any one of them.

Answer : Types of FM detector:- 1. Simple slope detector 2. Balanced slope detector 3. Phase discriminator(Foster seely discriminator) 4. Ratio detector 5. PLL detector Simple ... . If the IF amplitude is sufficiently limited prior to reaching the PLL and the loop is properly compensated 

Description : List the types of noise in communication system. Explain any one of them.

Answer : Explanation of External Noise:- Atmospheric Noise:- Atmospheric noise or static is caused by lighting discharges in thunderstorms and other natural electrical disturbances occurring in the atmosphere ... between two or more paths, and results from the random fluctuations in the division. 

Description : Define the following terms related to antennas; (i) Antenna resistance (ii) Directivity (iii) Antenna gain (iv) Power density

Answer : Antenna Resistance - The resistance of an antenna has two components: 1. Its radiation resistance due to conversion of power into electromagnetic waves 2. The resistance due to actual losses in the ... the transmitter power divided by the surface area of a sphere (4πR2) at that distance.

Description : Compare resonant and non-resonant antennas.

Answer : Distinguish between resonant and non-resonant antennas.

Description : State the types of electromagnetic polarization? Define any one of it.

Answer : Transverse electromagnetic wave:- The polarization of a plane EM wave is simply the orientation of the electric field vector with respect to the surface (i.e. looking at the horizon) If ... the field strength varies with change in polarization the wave is said to have an elliptical polarization 

Description : State the need of AGC. List the different types of AGC with neat graph.

Answer : Need of AGC:- The need or purpose of AGC circuit is to maintain the output voltage level (volume) of radio receiver constant over a wide range of RF input signal level.  AGC also helps to smooth out the rapid ... of AGC:- 1) Simple AGC 2) Delayed AGC Graphical representation of AGC:- 

Description : State the process FM detection? State it‟s any two types.

Answer : FM detection: In any radio that is designed to receive frequency modulated signals there is some form of FM demodulator or detector. This circuit takes in frequency modulated RF signals and takes the ... 3. Ratio Detector 4. Phase Discriminator 5. FM Detector using Phase Locked Loop (PLL)

Description : Draw the structure of horn antenna and its radiation pattern. List its any two applications.

Answer : The structure of horn antenna Radiation pattern of Horn Antenna Application:- i) Used at microwave frequency. ii) Used in satellite tracking 

Description : List three types of errors in measuring instruments. Give reasons of occurring for any one of them.

Answer : Types of errors in measuring instruments:  A) Gross error: These are due to mistakes on the part of person using the instrument.  B) Systematic Error: i) Instrumental Error: These ... multiplying factor.  C) Random error: These persist even after gross and systematic errors are removed.

Description : State and explain the types of noise in communication system.

Answer : External Noise:  Atmospheric Noise  Atmospheric noise or static is caused by lighting discharges in thunderstorms and other natural electrical disturbances occurring in the atmosphere. These ... between two or more paths, and results from the random fluctuations in the division.

Description : List and explain the properties of quarter wave transformer.

Answer : Properties of quarter wave transformer: 1. Impedance transfomation: it provides impedance transformation upto the highest frequencies and is compatible with transmission line. 2. Impedance inversion: if ZL is ... or step up transformer,depending on whether ZL IS greater than or less than ZO.

Description : List any two types of micro-hydro power plants. 

Answer : A) base on use - Conventional plants Pumped storage plants Run-of-river plants. B) based on size - Large hydro power plants (capacity more than 100MW) Medium hydro power plants (capacity 15 ... Micro hydro power plants (capacity 5KW to 100KW) Pico hydro power plants (capacity less than 5 KW)

Description : Explain any four different frequency bands and give their two applications of each.

Answer : Explain any four different frequency bands and give their two applications of each.

Description : List different electrical temperature sensors. Explain any one of them.

Answer : Different electrical temperature sensors: 1. RTD 2. Thermistors 3. Thermocouples Thermocouple: Explanation: If two dissimilar metals are joined together so as to form a closed ... difference in temperature between the two junctions and on the characteristics of the two metals.

Description : List different starting methods of three phase synchronous motor. Explain any one of them.

Answer : Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

Description : List four types of combustion chambers used in S.I. engine. Explain any one in detail with neat sketch.

Answer : Combustion chambers used in S.I. engine:- 1) T - Head 2) I - Head. 3) F - Head. 4) L - Head 5) Divided combustion chamber. 1. T Head Type Combustion chambers.  This ... and therefore more heat loss. 4. Valve size restricted. 6. Thermal failure in cylinder block also. 

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Description : List the types of locators and explain any one with a neat sketch.

Answer : 1) Adjustable locators ( Flat locators) 2) Cylindrical locators 3) Fixed V Locators 4) Conical locators 1) Flat Locator: -These are employed for locating flat machined faces of the component. ... . 5) V locator:-It is used for locating components having circular profile.

Description : List types of memory. Explain any one type of memory in brief.

Answer : Types of Memories in PLC:  i) Executive Memory  ii) Scratch Pad Memory  iii) Data Table a) Input image memory b) Output image Memory c) Internal bits/ registers/ words  ... storage for programmed instructions entered by the user. The user program area also stores the control program.

Description : List the types of ADCs. Explain working principle of any one type of ADC.

Answer : Types : 1. Successive approximation type A/D converter or Potentiometric type 2.Voltage to time or ramp type A/D converter 3.Voltage to frequency or integrating type A/D converter 4.Dual ... analog voltage and reference voltage are converted to ramp signals of different slopes by the integrator.

Description : For a pantograph write any twoi)Types ii ) Advantages iii ) Methods of raising iv ) Materials of collector strip

Answer : Ans: i) Types - a) Diamond Type Pantograph b) Faiveley Type Pantograph  ii) Advantages - a)Reversible operation is possible b)current collection capacity is high  iii) Methods of ... stripcopper, copper steel combination, silicon manganese steel ,aluminum steel, bronze, Metallized carbon or carbon

Description : What are the different types of FM detector?

Answer : The different types of FM Detectors are: 1. Simple Slope Detector 2. Balanced Slope Detector 3. Ratio Detector 4. Phase Discriminator 5. FM Detector using Phase Locked Loop (PLL) 

Description : Define pulse modulation. State its types. 

Answer : Pulse Modulation - consists essentially of sampling analog information signals and then converting those samples into discrete pulses. OR It consists essentially of sampling analog information signals and then converting those ... PAM - PWM - PPM  ii) Digital Pulse Modulation - PCM - DM - ADM 

Description : Define fading? List the causes.

Answer : The fluctuation in signal strength at a receiver, which is mainly due to the interference of two waves which left the same source but arrived at the destination by different paths, is known ... , such as irrigation, or from multiple transmission paths, irregular earth surfaces, and varying terrains.

Description : Draw the block diagram of PWM. List its advantages 

Answer : Block diagram of PWM:- Advantages of PWM:- 1. More immune to noise. 2. Synchronization between transmitter and receiver is not required. 3. Possible to separate out signal from noise.

Description : Write any two drawbacks of TRF radio receiver.

Answer : Drawbacks of TRF Receiver: 1. Instability due to oscillatory nature of RF amplifier. 2. Variation in bandwidth over tuning range. 3. Insufficient selectivity at high frequencies 4. Poor adjacent channel rejection capability. 

Description : State types of tariffs and describe any one of them. 

Answer : Types of tariffs: i) Simple tariff ii) Flat rate tariff iii) Block rate tariff iv) Two part tariff v) Three part tariff vi) Maximum demand tariff vii) Power factor tariff Explanation :-  ... kWh, where a= charge per kW of maximum demand and b = Charge per kWh or unit of energy consumed.

Description : Write one application of following antenna i. Rectangular antenna ii. Dish antenna iii. Yagi-Uda antenna iv. Horn antenna 

Answer : i. Rectangular antenna is used in direction finding in portable recievers. ii. Dish antenna is used to transmit and receive signal from satellite. iii. Yagi-Uda antenna is used in HF and VHF range as a TV receiving antenna. iv. Horn antenna is used in satellite tracking.

Description : Define: Base band signal with one example.

Answer : The electrical equivalent of the original information signal is known as the Baseband signal. Example:-The information or the input signal to a communication system can be analog i.e., sound, picture or it can be digital e.g. the computer data.

Description : Draw practical set-up and explain the procedure to measure selectivity of radio receiver.

Answer : Procedure to measure selectivity of radio receiver: Throughout the measurement the receiver is kept tuned to desired frequency 950 Khz. Now the generator output frequency is deviated below ... the generator output voltage is adjusted to get a standard 50 miliwatt receiver output power.

Description : State the need of stub. Explain single stub and double stub matching.

Answer : Stub:- Stub is the piece of short circuited transmission line which is used to tune out the reactance of the load when connected across the transmission line as close as possible. ... but lengths are independently adjustable. The double stub matching provides wide range of impedance matching.  

Description : Explain the working of amplitude limiter in FM receiver with circuit diagram.

Answer : Amplitude limiter: The function of amplitude limiter is to remove all amplitude variation of FM carrier voltage that may occur due to atmospheric disturbances. Use of amplitude limiter makes the system less noisy  Circuit Diagram:

Description : Explain duct propagation with neat sketch.

Answer : Duct propagation is a special type and used for very high microwave frequencies. New phenomenon which occurs in super-refraction, also known as ducting. As the height above earth increases, ... in the standard atmosphere. The Duct propagation is used for very high frequencies in GHz range.

Description : Draw circuit diagram of transistor reactance modulator. Explain its working.

Answer : Explanation- A reactance modulator is illustrated in figure. It is basically a standard commonemitter class A amplifier. Resistors R1 and R2 from a voltage divider to bias ... frequency, whereas a lower capacitance increases the frequency. The circuit produces direct frequency modulations.

Description : Define and explain the term beam width related to antenna with a sketch.

Answer : Definition: The beam width of an antenna is described as the angles created by comparing the half power point (3dB) on the main radiation lobe to its maximum power point. As an example the beam width ... max voltage at center of lobe (these point are known as half power points.) Sketch-  

Description : State and explain the concept of transmission bandwidth.

Answer : Bandwidth is defined as the portion of the electromagnetic spectrum occupied by a signal We may also define the bandwidth as the frequency range over which as information signal is transmitted. Bandwidth is the ... to 15 KHZ. Therefore the bandwidth is(f2-f1) BW= f2 - f1= 15000-20=14980Hz

Description : Explain operation of balanced slope detector with „s‟ curve.

Answer : Diagram: Explanation:   Curve:  

Description : Draw block diagram of FM receiver and explain the use of limiter circuit.

Answer : Diagram Explanation Amplitude limiter: The function of amplitude limiter is to remove all amplitude variation of FM carrier voltage that may occur due to atmospheric disturbances. Use of amplitude limiter makes the system less noisy.

Description : Explain “BALUN” with neat sketch

Answer : Diagram- Explaination

Description : Explain working of envelope detector with suitable diagram and waveform.

Answer : Envelope Detector: An Envelope Detector is an electronic circuit that takes a high frequency signal as input and provides an output which is as envelopes of the original signal. The capacitor ... decreases the responsiveness thus, real-world designs must be optimized for the application.

Description : Draw construction of Yagi-Uda antenna and explain.

Answer : Explanation A Yagi-Uda antenna, commonly known as a Yagi antenna, is a directional antenna consisting of multiple parallel elements in a line, usually half-wave dipoles made of ... receiver with a transmission line and additional parasitic elements called reflector and one or more directors.

Description : Why should local oscillator frequency be greater than signal frequency in AM receiver? Also explain why IF has constant value?

Answer : Reason for LO frequency to be greater than signal frequency The local oscillator frequency (f0) is made greater than signal frequency (Fs) in radio receiver: Local oscillator frequency range is 995 ... frequency of desired signal because the IF is constant and same for all the incoming RF signal.

Description : Explain virtual height with respect to wave propagation with neat sketch.

Answer : In ionization layer the incident wave refracts and bends down gradually than sharply.   The incident and refracted rays follow paths that are exactly the same as they would have been if reflection had taken place from a surface located at a greater height called virtual height of this layer. 

Description : Explain isotropic radiator with neat sketch. 

Answer : An isotropic radiator is a point source that radiates equally in all the directions. It is a hypothetical antenna used as a reference to describe real antenna. The radiation is represented by a sphere with center coincides with location of isotropic radiator.

Description : Explain ground wave propogation with neat sketch. 

Answer : Sketch-   Explanationi) It consists of direct wave which travels near the ground from Transmitter to Receiver. ii) The electromagnetic wave leaves the transmitting antenna & remains close to earth surface ... . The ground wave is the path chosen when frequency in between 30 KHz & 3 MHz 

Description : Draw and explain block diagram of electronic communication system.

Answer : Block diagram of electronic communication system. Explanation Transducer: A transducer is usually required to convert the output of a source into an electrical signal that is suitable for ... etc. Output Transducer: The output transducer converts electrical signal in to sound signal.  

Description : Explain how modulation reduces height of antenna and avoid mixing of signals.

Answer : Modulation reduces antenna height: For the transmission of radio signals, the antenna height must be multiple of λ/4 ,where λ is the wavelength . λ = c /f where c : is the ... will occupy different slots in the frequency domain (different channels). Thus, modulation avoids mixing of signals.

Description : Why electromagnetic waves are said to be transverse wave ? Explain.

Answer : The electromagnetic waves are oscillations which propagate through free space. In electromagnetic waves the direction of electric field, magnetic field & propagation are mutually perpendicular. Hence electromagnetic waves are called as transverse wave.

Description : Explain loop antenna with neat sketch. Draw radiation pattern. State its advantages and applications.

Answer : Loop antenna:-The single turn coil carrying RF current through it having length less than the wavelength.   Advantages:- 1. highly directive 2. Small size Applications:- 1. For direction finding 2. In portable receivers 3. In navigation 

Description : Explain with a neat diagram of ratio detector. Why limiter stage is not used before ratio detector.

Answer : With diode D2 reversed , O is positive with respect to b, so that Vab is a sum voltage rather than the difference it was in the discriminator it is now possible to connect a large capacitor ... of limiter stage due to large capacitor C5 .Hence, limiter stage is not used in ratio detector.  

← Prev Question Next Question →
Ask a Question
Choose topic