search
person
MOSFET uses the electric field of?

1 Answer

MOSFET uses the electric field of gate capacitance.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : Briefly describe the electric field of a static charge.

Description : The ability of materials to become polarized under an applied electric field is called _______ A) Ferroelectricity B) Paraelectricity C) Polectricity D) None of these

Answer : The ability of materials to become polarized under an applied electric field is called Paraelectricity

Description : The electric field inside a hollow conducting sphere ________ A) Depends on the diameter of the sphere  B) Varies according to the direction of earth’s magnetic poles C) Is zero  D) None of these

Answer : The electric field inside a hollow conducting sphere Is zero

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

Description : Is electric potential zero when electric field is zero?

Answer : Yes  .If  electric  field  is  zero  then  electric  potential  is  zero  ,  not  even  one.

Description : What is the direction of the induced electric field?

Answer : It  is  in  opposite  direction   to  the  one  that   produced  it.

Description : Can the electric field between two positive charges be zero?

Answer : It  can  only  if  they  have  equal  charges.

Description : What is the direction of the electric field?

Answer : Electric   field    is  at   right angle   widh  flow  of  current  (right  hand   rule).

Description : How can a magnetic field be used to generate an electric current?

Answer : Magnetic  field  can  be  used  to  generate  electric  current  on  a  condition  that  it  is  on  a  rate  of  changing  magnetic  flux.  (Faraday's  law)

Description : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C ... the device will be A) 1.52 W B) 1.72 W C) 1.92W D) 2.00 W

Answer : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of  ... 300o C, then the maximum allowable power dissipation in the device will be 2.00 W 

Description : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) When the Drain voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

Answer : When does the Body bias effect occur in an n-channel MOSFET?  A) When the Source voltage is less the Bulk voltage B) When the Source voltage is equal to or greater the Bulk voltage C) ... voltage is equal to the Bulk voltage D) When the Gate voltage is equal to the Bulk Voltage 

Description : A MOSFET has how many terminals?

Answer : A MOSFET having three terminals 1st one is Gate (insulated), 2nd one is Source and 3rd one is Drain.

Description : What is the transconductance of a MOSFET?

Description : What is meant by pinch off voltage in MOSFET?

Description : What is channel length modulation in MOSFET?

Answer : Shortening of lenght of the inverted channel region with increase in drain bias for large drain biases due to which current increases with drain bias and output resistance decreases is called channel length modulation in MOSFET.

Description : What is meant by body effect in MOSFET?

Description : How can we check a Mosfet?

Description : What is the use of a Mosfet?

Description : Why Mosfet is called Mosfet?

Description : What is the work of MOSFET?

Description : In MOSFET, the polarity of the inversion layers is the same as that of?

Answer : In MOSFET, the polarity of the inversion layers is the same as that of majority carriers in the source.

Description : Is the input impedance of MOSFET more than BJT and FET?

Answer : Yes, the input impedance of MOSFET more than BJT and FET.

Description : what are the uses of MOSFET ?

Answer : Choppers and inverters and where high switching frequency is required.

Description : What are the uses of Thermistors ?

Answer : Thermistors are frequently used in electronic circuits in which it is desired to provide temperature measurement, temperature control, and temperature compensation.

Description : A 17 inch personal computer uses approximately 150 watts in an hour. If you have same computer on for only 4 minutes (for checking e-mail) what would be the power consumption?  (A) 0.1 kW (B) 0.04 kW (C) 0.01 kW (D) None of the above

Answer : A 17 inch personal computer uses approximately 150 watts in an hour. If you have same computer on for only 4 minutes (for checking e-mail) what would be the power consumption?  (A) 0.1 kW (B) 0.04 kW (C) 0.01 kW (D) None of the above

Description : A 100-watt light bulb turned on for 8 hours uses :  (A) 800 Wh (B) 0.8 kWh (C) 8 kWh (D) None of the above

Answer : A 100-watt light bulb turned on for 8 hours uses :  (A) 800 Wh (B) 0.8 kWh (C) 8 kWh (D) None of the above

Description : The electrode rod used for welding uses a coating on it 

Answer : The electrode rod used for welding uses a coating on it  to give a vapour to serve as a shielding gas to protect the weld area from atmospheric contamination and to provide slag to protect the welded area

Description : A universal RLC bridge uses?

Answer : A universal RLC bridge uses Maxwell Wein bridge for measurement of inductance and modified De Santy's bridge for measurement of capacitance.

Description : State advantages of MOSFET.

Answer : Advantages of MOSFET * MOSFETs provide greater efficiency while operating at lower voltages. * Absence of gate current results in high input impedance. * High switching speed. * They operate at lower ... due to lower resistance of channel. * They are easy to manufacture. * They are portable.

Description : What parameters are to be considered when choosing a MOSFET?

Description : Describe with neat sketch the construction and working principle of MOSFET.

Answer : Construction and working principle of MOSFET:  A) Depletion type MOSFET: Construction: The N-channel depletion type MOSFET is formed on P-type silicon substrate with two heavily ... accumulation of electrons and hence more current. Thus the MOSFET is a gate voltage controlled device.

Description : State the applications of MOSFET

Answer : Applications of MOSFET: i) Switching-mode-power-supplies (SMPS) and linear power supplies. ii) Brushless DC motor drives iii) Solid state DC relay iv) Automobile applications v) Stepper motor controller vi) Lighting controls vii) Solenoid drivers viii) Robotics ix) Induction heating

Description : Compare JFET with MOSFET.

Answer : Particulars JFET MOSFET 1) Type Voltage controlled device Voltage controlled device 2) Mode of operation Operates only in depletion mode Operates in depletion and enhancement ... 6) Gate connection Not isolated from substrate Isolated by SiO2 layer from substrate

Description : Describe the operation of N channel enhancement type MOSFET with diagram.

Answer : As its name indicates, this MOSFET operates only in the enhancement mode and has no depletion mode. It operates with large positive gate voltage only. It does not conduct when the ... of charge carriers attracted to the positive gate. Thus drain current is controlled by the gate potential.

Description : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V

Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

Description : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown

Answer : Which phenomenon is present in thyristors but absent in BJT, MOSFET and IGBT ? (A) forward conduction (B) latching (C) forward blocking (D) reverse breakdown

Description : Explain switching model of MOSFET.

Description : Explain MOSFET gate drive circuit and totem pole configuration.

Answer : MOSFET gate drive circuit: The turning on and turning off of MOSFET can be controlled from gate to source voltage signal. If the gate to source voltage of MOSFET exceeds threshold ... this configuration, the two switches (transistors) are used in totem pole arrangement with a comparator.

Description : Explain the formation of parasitic BJT and parasitic diode in Power MOSFET. Can parasitic diode be used in same power electronics applications?

Answer : Parasitic Diode: The parasitic diode is in between drain and source. The MOSFET structure itself contains parasitic diode or body drain diode. This parasitic diode allows the reverse flow of current when the ... of MOSFET as a BJT collector. Parasitic BJT operates in the cut-off region.

Description : Operating frequency of power MOSFET is higher than that of power BJT. Justify the statement.

Answer : Power MOSFET have high turning on and turning off capability high switching speed of MOSFET is due to the high rate of change of drain voltage. The switching losses of power MOSFET ... lower frequency. Hence, operating frequency of power MOSFET is higher than that of power BJT.

Description : Justify the statement. Antiparallel diode is connected across MOSFET.

Answer : In MOSFET current is flow from drain to source but when the load is inductive the current may flow in opposite direction. To avoid the opposite flow of current and to protect MOSFET the antiparallel diode is connected across MOSFET.

Description : parallel operation of MOSFET can be done more easily as compared to thyristor. why?

Answer : Parallel operation of MOSFET can be done more easily as compared to thyristor because the resistance of MOSFET is increases with increase in temperature. MOSFET have the positive temperature coefficient. In ... the parallel operation of MOSFET can be done more easily as compared to the thyristor.

Description : Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 

Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

Description : Explain difference between enhancement MOSFET and depletion type MOSFET.

Answer : In enhancement MOSFET channel is not initially exists but in depletion MOSFET channel is already exists. In case of depletion MOSFET if the voltage is applied between drain and source the drain current will flow ... a channel. depletion MOSFET & enhancement MOSFET

Description : Compare BJT, MOSFET and IGBT .

Answer : BJT MOSFET IGBT BJT is a current controlled device. MOSFET is a voltage controlled device. IGBT is a voltage controlled device. The input impedance of BJT is low. ... is minority carrier device. MOSFET is majority carrier device. IGBT is minority carrier device.

Answer : Yes IGBT is costlier than BJT and MOSFET.

Answer : No MOSFET do not have a second breakdown problem.

Answer : MOSFETs are of two types namely  1) enhancement type MOSFET  or  E-MOSFET 2) depletion type MOSFET  or  D-MOSFET

← Prev Question Next Question →
editChoose topic
...