The leakage current of PN junction is caused by?

1 Answer

The leakage current of PN junction is caused by heat energy.

Like 0 like Dislike 0 dislike

Related questions

Description : Define Depletion region and Barrier voltage of PN junction.

Answer : 1. Depletion region : The region consisting of immobile positive charge at n-side and immobile negative charge at p-side near the junction acts like a barrier and prevents the further flow of ... charge formed at the p-n junction is called barrier voltage, barrier potential or junction barrier.

Answer : In Reverse bias of diode when the cathode is connected to positive and anode is connected to negative very small current flows this very small current is known as leakage current of diode.

Description : Leakage current flows through the thyristor in

Answer : Leakage current flows through the thyristor in Forward blocking mode and Reverse blocking mode.

Description :  applications of P-N junction diode

Answer : 1.It is used as rectifier in DC power supply 2.It is used as free wheel diode across relay or inductive load 3.It is used as switch in logic circuits used in computers 4.It is used as detector in demodulation circuits of communication receiver 

Description : Define junction field effect transistor (JFET) and give an example.

Answer : Junction Field-Effect Transistor: It is a semiconductor device having three terminals, namely Gate, Drain and Source, in which the current flow is controlled by an electric field set up by an external voltage applied ... : i) n-channel JFET and ii) p-channel JFET Examples of JFET: BFW 10, BFW 11 

Description : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of 600 C/W. If the ambient temperature is 300o C ... the device will be A) 1.52 W B) 1.72 W C) 1.92W D) 2.00 W

Answer : A certain power MOSFET has a maximum junction temperature specification of 1500o C, a junction-to-case thermal resistance of 1.00 C/W, and a junction-to ambient thermal resistance of  ... 300o C, then the maximum allowable power dissipation in the device will be 2.00 W 

Answer : The leakage current in a pn junction is of the order of µA.

Answer : The leakage current across a pn junction is due to Minority carriers.

Description : Why does leakage occur in a magnetic circuit?

Description : Define leakage factor.

Answer : It is the ratio of total flux to leakage flux.

Description : what is earth leakage?

Description : State function of starter and ELCB. (Earth Leakage Circuit Breaker)

Answer : i) Function of Starter:- 1. To prevent the high starting current OR to minimize the starting current. 2. To give supply failure protection 3. To give over load and short circuit protection ... an installation and cut off the circuit from power supply and avoid electrical shock to the person.

Description : Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Answer : Leakage Flux

Description : Define useful flux, leakage flux and fringing.

Description : Explain the leakage flux and its effect with the help of neat diagram.

Answer : In cut-off region of BJT both the emitter-base junction and collector-base junction are reverse biased.

Answer : A UJT has one PN Junction

Description : Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Answer : Definition of parameters of OPAMP is follows:  i) Input Offset Voltage: Input offset voltage is defined as the voltage that must be applied between the two input terminals of an OPAMP to null or ... to ground) and output voltage is obtained non zero such voltage is output offset voltage of opamp.

Description : What is the current gain?

Answer : Current gain β = Ic/Ib

Description : Which configuration has the lowest current gain ?

Answer : Common base configuration has the lowest current gain.

Answer : In  BJT  there  is  movement  of   electrons  and  holes   accros  the  junctions  which  is  basicaly  current  flow.

Description : Find the current through 4 ohm resistor by source transformation

Description : For a round wire, the approximate value of fusing current is given by

Answer : For a round wire, the approximate value of fusing current is given by  K√d3

Answer : Alternating current is measured by induction ammeter.

Answer : A direct current can be measured by a D.C. potentiometer in conjunction with a standard resistance.

Description :  In thermo-couple instruments, in which of the following is an emf caused if the junction of two wires of dissimilar metals is heated and the free or cold ends are connected to a milli-voltmeter? A) Kelvin effect B) Hot wire effect C) Seebeck effect D) Faraday effect 

Answer :  In thermo-couple instruments, in which of the following is an emf caused if the junction of two wires of dissimilar metals is heated and the free or cold ends are connected to a milli-voltmeter? A) Kelvin effect B) Hot wire effect C) Seebeck effect D) Faraday effect 

Description : State any Four applications of PN junction diode.

Answer : 1. Rectifiers in power supplies, 2. Detectors in RF, 3 .Clippers, 4. In clamping networks used as DC Restorers, 5. As switches in digital logic circuits.

Description : Describe the working of PN junction diode with neat sketch under forward biased condition.

Answer : If the p-region (anode) is connected to the positive terminal of the external DC source and nside (cathode) is connected to the negative terminal of the DC source then the biasing ... The large number of majority carriers crossing the junction constitutes a current called as the forward current.

Description : Describe avalanche and zener breakdown of PN junction with neat graph.

Answer : Avalanche Breakdown It is observed in diodes having Vz> 8V. is called Avalanche Breakdown It occurs due to accelerating minority carriers. It shows gradual change. Breakdown voltage ... field. Breakdown is very sharp. Breakdown voltage decreases with increase in temperature 

Description : Plot and explain I -V characteristics of a PN junction diode. 

Answer : V-I characteristics of PN junction diode: Explanation:  Forward Bias:  If the external voltage applied on the silicon diode is less than 0.7 volts, the silicon diode ... reverse breakdown voltage.  * Diode breakdown occurs by two mechanisms: Avalanche breakdown and Zener breakdown.

Description : Gold is often diffused into silicon PN junction devices to   (A) increase the recombination rate (B) reduce the recombination rate (C) make silicon a direct gap semiconductor (D) make silicon semi-metal

Answer : To  increase  the  combinational  rate  at  the  pn  junction

Description : A forward-biased PN-junction,  (A) results in increase in diffusion current  (B) results in increase in drift current  (C) results in decrease in drift current  (D) results in decrease in diffusion current

Answer : A forward-biased PN-junction,  results in increase in diffusion current 

Description : In a PN-junction with open circuit terminal (equilibrium), with P doping higher as compared to N doping (A) N-side depletion region is small as compared to p-side depletion region (B) N-side ... depletion region (C) N-side depletion region is same as p-side depletion region (D) Cannot say

Answer : In a PN-junction with open circuit terminal (equilibrium), with P doping higher as compared to N doping N-side depletion region is small as compared to p-side depletion region

Answer : The p-type substrates in a conventional pn-junction isolated integrated circuit should be connected to: The most negative potential available in the circuit.

Answer : With forward bias to a pn junction , the width of depletion layer Decreases.

Answer : A pn junction acts as a Unidirectional switch.

Answer : A reverse bias pn junction has Almost no current.

Answer : In the depletion region of a pn junction, there is a shortage of Holes and electrons.

Answer : The battery connections required to forward bias a pn junction are +ve terminal to p and –ve terminal to n.

Answer : In a transistor leakage current mainly depends on temperature.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Description : Even at no-load, a transformer draws current from the mains. Why?

Description : Current division rule example

Answer : Current division rule example

Description : Current division

Answer : Current division

Description : A linear network has a current input 4cos(ω t + 20º)A and a voltage output 10 cos(ωt +110º) V. Determine the associated impedance.

Answer : Solution

Description : Source transformation voltage source to current source and vice versa

Description : Find current through resistor using nodal analysis

Answer : Find current through resistor using nodal analysis

Description : Nodal analysis problem two current source

Answer : Nodal analysis problem two current source

← Prev Question Next Question →
Ask a Question
Choose topic