search
person
A pony motor is basically a?

1 Answer

Pony motor is basically a small induction motor.
thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : TWT is basically a(n) A) Amplifier B) An oscillator C) Wideband amplifier D) Tuned amplifier 

Answer : TWT is basically a(n) Wideband amplifier 

Answer : Slip-rings in a synchronous motor carry direct current.

Answer : The efficiency of a properly designed synchronous motor will usually fall in range 85 to 95%.

Description : A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because?

Answer : A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because stator supply is not required to produce magnetic field.

Answer : A synchronous motor running with normal excitation adjusts to load increases essentially by increase in armature current.

Answer : The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

Answer : A synchronous motor can develop synchronous torque at synchronous speed.

Answer : In case one phase of a three-phase synchronous motor is short-circuited the motor will not start.

Answer : In a synchronous motor, the armature current has large values for high and low excitation.

Answer :  The size of a synchronous motor decreases with the increase in flux density.

Answer : The duration of sudden short-circuit test on a synchronous motor is usually about one second.

Description : The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as?

Answer : The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as pull-in torque.

Answer : The construction of a synchronous motor resembles an alternator.

Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

Description : The maximum torque which a synchronous motor will develop at rest for any angular position of the rotor, at rated stator supply voltage and frequency, is known as?

Answer : The coupling angle or load angle of synchronous motor is defined as the angle between the rotor and the stator poles of opposite polarity.

Answer : If the synchronous motor, properly synchronised to the supply is running on no load and is having negligible loss then the stator current will be zero.

Answer : The armature current of the synchronous motor has large values for low and high excitation.

Description : Which motor have more efficiency, synchronous motor or induction motor?

Answer : Synchronous motor has more efficiency.

Description : If we change the excitation of synchronous machine will it affect on motor speed?

Answer : No, If we change the excitation of synchronous machine it will not affect on motor speed.

Description : How can we reverse the direction of rotation of synchronous motor?

Answer : By reversing supply phase sequence we can reverse the direction of rotation of synchronous motor.

Description : An electric motor in which both stator field and rotor rotates with same speed is called?

Answer : An electric motor in which both stator field and rotor rotates with same speed is called synchronous motor.

Description : What is the maximum value of torque angle in synchronous motor?

Answer : The maximum value of torque angle in synchronous motor is 90 degrees electrical.

Description : If the load of the normally excited synchronous motor is increased the power factor will?

Answer : If the load of the normally excited synchronous motor is increased the power factor will become lagging.

Description : Hunting in synchronous motor cannot be due to?

Answer : Hunting in synchronous motor cannot be due to windage friction.

Description : The synchronous motor which works on leading power factor and does not drive any mechanical load is called?

Answer : The synchronous motor which works on leading power factor and does not drive any mechanical load is called synchronous condenser.

Description : The damping winding in synchronous motor is generally used to?

Answer : The damping winding in synchronous motor is generally used to provide starting torque and prevent hunting.

Description : If the field of synchronous motor is under excited, power factor will be?

Answer : If the field of synchronous motor is under excited, power factor will be lagging.

Description : An unexcited single phase synchronous motor is ?

Answer : An unexcited single-phase synchronous motor is reluctance motor.

Description : A synchronous motor can be made self starting by providing?

Answer : A synchronous motor can be made self-starting by providing damper bar.

Description : In a synchronous motor which losses varies with load?

Answer : In a synchronous motor, copper losses varies with load.

Description : The back emf of synchronous motor depends on?

Answer : The back emf of synchronous motor depends on load angle.

Description : Synchronous motor always runs at which speed?

Answer : Synchronous motor always runs at synchronous speed.

Description : Can we use the synchronous motor as the synchronous capacitor?

Answer : Yes, we can use the synchronous motor as the synchronous capacitor when the synchrnous motor is overexcited.

Description : The synchronous motor will develop maximum power when the load angle is?

Answer : The synchronous motor will develop maximum power when the load angle is 900.

Description : what will happen when excitation of an unloaded salient pole synchronous motor suddenly gets disconnected?

Answer : When excitation of an unloaded salient pole synchronous motor suddenly gets disconnected the motor will stop.

Description : Three phase synchronous motor will have how many sliprings?

Answer : Three phase synchronous motor will have two sliprings.

Description : When the stator windings are connected in such a fashion that the number of poles are made half, the speed of the rotor of a synchronous motor?

Answer : When the stator windings are connected in such a fashion that the number of poles are made half, the speed of the rotor of a synchronous motor increases to two times the original value.

Description : what is a pony motor ?

Answer : pony motor is a small induction motor

Description : Explain the necessity of starter for D.C. motor. State various types of D.C. motor starter. 

Answer : Necessity of Starter for D.C. Motor: Armature current is given by equation Ia = (V−Eb)/Ra i) If the motor is at standstill or rest, back emf Eb is zero (as Eb= ZNP/(60A), at start speed N ... . Types of D.C. motor starters: i) Two point starter ii)Three point starter iii) Four point starter

Description : State at least one function and the material used for the following parts of DC Motor.

Answer : Part Function Material Yoke -Provides mechanical support for poles -Acts as protecting cover for machine -Provides path for magnetic flux Cast Iron OR Cast Steel Field Winding - ... Pole core  Provides mechanical support to field winding. Cast Iron OR Cast Steel

Description : Explain the working principle of induction motor. 

Answer : Working principle of induction motor: * When the motor is excited with three-phase supply, three-phase stator winding carries three-phase currents & produces a rotating magnetic field of constant magnitude and ... , which tend to move the rotor in the same direction as the rotating magnetic field. 

Description : State the insulating materials used in motor. Write temperature class and withstand temperature ranges for them. 

Answer : The insulating materials used in motor are as belows: 1. Cotton, 2. Silk, or paper, 3. Press board, 4. Resins 5. PVC 6. Cellulose-Fiber, 7. Enameled coating, etc  ... Over 180° Mica, porcelain, ceramics, glass quartz, asbestos, treated glass fiber or treated asbestos. etc.

Description : List different starting methods of three phase synchronous motor. Explain any one of them.

Answer : Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

Description : Draw and explain V and inverted V curves for synchronous motor.

Answer : V curves' and inverted V curves' for Synchronous Motor:  V curve:  V curve is a plot of the stator current versus field current for different constant loads. The graph is plotted ... Vcurves of synchronous motor. The highest point on each of these curves indicates unity power factor.

Description : State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Answer : Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

Description : Explain the activities carried out during weekly maintenance of 3 ph. Induction motor. 

Answer : Activities Carried out During Weekly Maintenance of 3 ph. Induction Motor:  1) Check belt tension. In cases where this is excessive it should immediately be reduces and in the case of sleeve ... and cooled by oil mist systems its important to check the oil mist flow paths/pressure components.

Description : Describe with neat sketch working of hysteresis motor.

Answer : Working: When stator is energized with single phase ac supply, rotating magnetic field is produced because of starting (auxiliary) and main windings, which remain in circuit permanently. The ... the principle of magnetic locking this motor either rotates at synchronous speed or not at all.

Description : List applications of stepper motor.

Answer : Applications of Stepper Motor: 1) Computer controlled systems 2) Numerical control of machine tools 3) Tape drives 4) Floppy disc drives 5) Computer printers 6) X-Y plotters 7) ... ) Extruders 21) Engravers 22) Analytical and Medical instruments 23) Embroidery Machines 24) Packaging Machines

← Prev Question Next Question →
editChoose topic
...