# How do you charge a capacitor with a battery?

How do you charge a capacitor with a battery?

The  capacitor  is  connected   in  parallel  with   the  battery.

## Related questions

Description : The state of charge of the battery is indicated by the electrolyte's :  (A) mass (B) colour (C) viscosity (D) specific gravity

Answer : The state of charge of the battery is indicated by the electrolyte's : specific gravity

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Description : what is the difference between capacitor and battery ?

Answer : A capacitor stores power but in very small quantitys and work in D/C and A/C circuits and it needs a power source from wich it gets the power it stores and a battery also stores power but in much larger quantitys measured in Amp/Hours

Description : How do you test a capacitor with a multimeter?

Description : What is the output voltage of a battery if 10 J of energy is expended in moving 1.25 C of charge?

Description : How do you discharge a capacitor in a microwave?

Description : How do you know when a capacitor is bad?

Description : How do I discharge a capacitor?

Description : A charge of 0.1 C moves past a given point every 0.01 s. How much is the current?

Answer : The current is 10.0A.  1ampere = 1 Coulomb per 1 second.  0.1Coulombs ÷ 0.01seconds = 10.0amperes.

Description : How the charge Carriers are created?

Answer : Charge Carriers are created if the electrons is removed from atom .

Description : How to start the car if the battery is dead?

Answer : The relevance of this issue can hardly be overestimated. All drivers have faced this problem at least once. I forgot to turn off the headlights, the light in the passenger compartment, the alarm has ... the car starts, engage neutral as soon as possible. Based on materials from http://vikupbitih.ru/

Description : How to keep the battery charged as long as possible?

Answer : How to keep the battery charged as long as possible? Modern smartphones have rather large batteries, and the charge usually lasts for a long time. But what to do if the charger is left at home, ... and waste energy. We hope these simple tips will help you stay connected for as long as possible.

Description : How to make power bank from laptop battery cells?

Answer : You can make the power bank from laptop battery cells. Things you need to make power bank from laptop battery cells: Laptop battery cells (about 6 in parallel) Universal Dual USB 5V 1A 2.1A New Hot ... If you have any doubt ask it. Thanks...

Description : Can you make alternating current through a battery?

Answer : Yes, we can make AC through a battery using an inverter.

Description : Briefly describe the electric field of a static charge.

Description : Coulomb Siemens Farad Joule

Description : The minimum charge on an ion is?

Answer : The minimum charge on an ion is equal to the charge of an electron.

Description : Why does charge flow from positive to negative?

Description : What is the charge and mass of an electron?

Answer : Charge on electrons is 1.6022*10-19CAnd the mass of electrons is 9.109*10-31 kg

Description : Explain and demonstrate battery ratings method as a method of battery charging

Description : Draw the circuit diagram of battery charger using SCR and explain it’s working.

Answer : Battery charger circuit using SCR: The figure shows the battery charger circuit using SCR. A 12V discharged battery is connected in the circuit and switch SW is closed. The singlephase 230V ... not fired. In this way, after full charging, further charging is automatically stopped.

Description : A battery is known to have an EMF of 5.0V but when a certain voltmeter is connected to it the reading is 4.9V. The battery can deliver a current of 0.40A when connected to a resistance of 12ohms. What is the resistance of the voltmeter?

Description : when charging a battery we use a DC supply but not an AC supply. Why ?

Answer : When power is supplied to the battery, electrolyte inside the battery is divided into positive and negative ions, where ions with similar pole is gained in one side. This reactionʼs flow coincides with direct current.

Description : List out the precautions to be taken while charging of lead- acid battery

Answer : precautions to be taken while charging of lead- acid battery: 1) Never keep the battery in the circuit and connect for external charging if it is not designed so. 2) While disconnecting / removing a ... tools etc on batteries. 10) Do not splash any liquids on the batteries, near the charger etc.

Description : Explain the maintenance of lead acid battery.

Answer : Maintenance of lead acid battery: 1) Keep the container surface dry by using dry cloths. 2) Tighten the terminal connections. 3) Battery should not be discharged below a minimum voltage. 4) Never keep battery ... -container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : In lead acid battery the density of acid indicates the  (1) charge of the battery (2) level of acid (3) e.m.f of the battery (4) damage of the plates

Answer : In lead acid battery the density of acid indicates the charge of the battery

Description : The storage battery generally used in electric power stations is  (1) zinc carbon battery (2) lead acid battery (3) nickel cadmium battery (4) lithium -ion battery

Answer : The storage battery generally used in electric power stations is lead acid battery

Description : The current flow in a battery is due to ______ A) movement of ions B) movement of protons C) movement of holes D) movement of neutrons

Answer : The current flow in a battery is due to movement of ions

Description : In a battery, the difference between the no-load voltage and the measured voltage output is called ________ A) Internal voltage B) Internal resistance C) External resistance D) All the above

Answer : In a battery, the difference between the no-load voltage and the measured voltage output is called Internal resistance

Answer : Battery operated trucks are used in factories for material transportation.

Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Description : Is current from a battery AC or DC?

Answer : The current from the battery is DC

Description : What are the characteristics of a capacitor?

Description : Which capacitor is used for high frequency?

Description : What is the role of a capacitor in a circuit?

Description : Why shunt capacitor is used?

Answer : To improve voltage at receiving end and power factor

Description : Why capacitor bank is used?

Answer : In industrial or factory used E.B Power supply must be maintained above 0.90 power factor is compulsory for avoid EB Penalty. So APFC ( automatic Power factor control ) panel is used to maintained balance the load and PF maintained.

Description : What is the basic use of capacitor?

Description : What is the basic function of a capacitor?

Description : What is the direction of flow when charging a capacitor?

Description : What is the symbol of a capacitor?

Answer : symbol of a capacitor

Description : Which side of a capacitor is negative?

Answer : In electrolytic type negative is shorter lead and usually mark in the tank. But of course not applicable to non-polar.

Description : How does a capacitor improve power factor?

Answer : Every circuit are usually more inductive than capacitive.it means that the current lags by voltage at small angle.hence we have to compensate this situation so we use Capacitor then this lag is compensate ... angle becomes low and the value of cos(phase angle) is increase and hence power also max.

Description : A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by an inductor of equivalent reactance value. It will?

Answer : A capacitor-start single phase induction motor is switched on to supply with its capacitor replaced by an inductor of equivalent reactance value. It will not start at all.

Answer : In a capacitor start and run motors the function of the running capacitor in series with the auxiliary winding is to improve power factor.

Description : State the applications and specification of (i) Resistor (ii) Capacitor (iii)Inductor

Answer : Application of resistor: 1.Resistors are used in high frequency instrument. 2.Resistor is used in power control circuit. 3.It is used in DC power supplies. 4.Resistors are used ... DC Current  3.Electromagnetic Interference (EMI)  4.Magnetic Saturation Flux Density  5.Curie Temperature

Description : Charging Action of capacitor

Answer : Charging Action of capacitor .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Capacitor : Before charging takes place

Answer : Capacitor : Before charging takes place

Description : Why is a capacitor used in a single phase motor and not in three phase motor ?

Answer : In 1-phase induction motor capacitor work is generate the auxiliary winding current than excite the main winding to rotor starts rotate. After rotor start rotating about 75% of their speed than auxiliary ... emf to start the motor.so,in 3-phase induction motor is self start induction motor.

← Prev Question Next Question →