menu search
person

Why dc series motor should not be started at no load?

thumb_up_alt 0 like thumb_down_alt 0 dislike
606 views

Related questions

Description :

Answer :

Series motor should not be started on no-load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
72 views 1 answer
Description :

In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is :

Answer :

In a 2 kW, 200 V, 1000 rpm. DC series motor the torque at full load was found to be 0.3 N -m. The torque at half full load in N -m is : 0.075

thumb_up_alt 0 like thumb_down_alt 0 dislike
83 views 1 answer
Description :

Why a dc series motor has a high starting torque?

thumb_up_alt 0 like thumb_down_alt 0 dislike
70 views 0 answers
Description :

Why does the speed of a DC shunt motor decrease as the load increases?

Answer :

Because if the load is increasing then the torque must also be increase. If not then the speed of motor will decrease.

thumb_up_alt 0 like thumb_down_alt 0 dislike
2.6k views 1 answer
Description :

State the modification to be done in dc series motor to work satisfactorily as ac series motor. State applications of ac series motor.

Answer :

Modifications are necessary in a dc series motor so that it operates satisfactorily on ac supply. The modifications are as follows:  1) AC series motor is built with a few field turns as ... and grinders 5) High speed vacuum cleaners 6) Sewing machines 7) Food processors 8) Drilling machine 

thumb_up_alt 0 like thumb_down_alt 0 dislike
119 views 1 answer
Description :

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be

Answer :

A 240 V, dc shunt motor draws 15 A while supplying the rated load at a speed of 80 rad/s. The armature resistance is 0.5 W and the field winding resistance is 80 W. The net Voltage across armature resistance at the time of plugging will be 474 V

thumb_up_alt 0 like thumb_down_alt 0 dislike
321 views 1 answer
Description :

What are the advantages of DC series motor?

thumb_up_alt 0 like thumb_down_alt 0 dislike
84 views 0 answers
Description :

Brake test on DC series motor

Answer :

.embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

thumb_up_alt 0 like thumb_down_alt 0 dislike
188 views 2 answers
Description :

Describe the reason of using dc series motor for electric trains.

Answer :

Electric trains require an inverse torque speed characteristics for proper operation. That is a higher torque is required at start (when speed is nil or low) and as the train picks up ... torque - speed characteristics of DC series motors match, these motors are suitable for electric trains

thumb_up_alt 0 like thumb_down_alt 0 dislike
120 views 1 answer
Description :

Answer :

In a D.C. series motor, if the armature current is reduced by 50%, the torque of the motor will be equal to 25% of the previous value.

thumb_up_alt 0 like thumb_down_alt 0 dislike
166 views 1 answer
Description :

Answer :

The direction of rotation of a D.C. series motor can be changed by interchanging field terminals.

thumb_up_alt 0 like thumb_down_alt 0 dislike
79 views 1 answer
Description :

Answer :

When a D.C. series motor is connected to A.C. supply, the power factor will be low because of high inductance of field and armature circuits.

thumb_up_alt 0 like thumb_down_alt 0 dislike
107 views 1 answer
Description :

Answer :

If a D.C. shunt motor is working at full load and if shunt field circuit suddenly opens this will make armature to take heavy current, possibly burning it.

thumb_up_alt 0 like thumb_down_alt 0 dislike
114 views 1 answer
Description :

Answer :

The speed of a D.C. series motor is inversely proportional to the armature current.

thumb_up_alt 0 like thumb_down_alt 0 dislike
76 views 1 answer
Description :

Answer :

A D.C. series motor is that which has its field winding consisting of thick wire and less turns.

thumb_up_alt 0 like thumb_down_alt 0 dislike
58 views 1 answer
Description :

Answer :

A.C. series motor as compared to D.C. series motor has smaller brush width, less number of field turns, more number of armature turns, less air gap.

thumb_up_alt 0 like thumb_down_alt 0 dislike
77 views 1 answer
Description :

Answer :

If a D.C. series motor is operated on A.C. supply, it will spark excessively, have poor efficiency, have poor power factor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
73 views 1 answer
Description :

DC series motor should never be started at no-load. Justify. 

Answer :

At no load the field current (which is also the armature current) is very small and hence the useful air-gap field flux. Also the torque is very small.  As N ∝ 1/Ф the speed rises to ... on the rotating parts they may get damaged. Hence DC series motor should never be started on no-load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
68 views 1 answer
Description :

Answer :

As the load is increased the speed of D.C. shunt motor will reduce slightly.

thumb_up_alt 0 like thumb_down_alt 0 dislike
116 views 1 answer
Description :

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ (A) directly proportional to α and Φ (B) inversely proportional to α and Φ (C) directly proportional to α and inversely proportional to Φ (D) directly proportional to Φ and inversely proportional to α

Answer :

The no-load speed of a single-phase SCR bridge converter fed separately excited dc motor operating at a firing delay angle, α and flux, Φ directly proportional to α and inversely proportional to Φ

thumb_up_alt 0 like thumb_down_alt 0 dislike
128 views 1 answer
Description :

Answer :

Series capacitors on transmission lines are of little use when the load VAR requirement is small.

thumb_up_alt 0 like thumb_down_alt 0 dislike
154 views 1 answer
Description :

Explain series switching control of AC load. Single phase resistance load - Integral half cycle control Phase control - Resistance load

thumb_up_alt 0 like thumb_down_alt 0 dislike
55 views 0 answers
Description :

Answer :

If a D.C. shunt motor is working at no load and if shunt field circuit suddenly opens this will result in excessive speed, possibly destroying armature due to excessive centrifugal stresses.

thumb_up_alt 0 like thumb_down_alt 0 dislike
108 views 1 answer
Description :

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Answer :

A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is 150/√3

thumb_up_alt 0 like thumb_down_alt 0 dislike
219 views 1 answer
Description :

Explain with neat circuit diagrams the procedures to perform no load and blocked rotor tests on three phase induction motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
95 views 0 answers
Description :

Answer :

If the synchronous motor, properly synchronised to the supply is running on no load and is having negligible loss then the stator current will be zero.

thumb_up_alt 0 like thumb_down_alt 0 dislike
98 views 1 answer
Description :

We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be

Answer :

We connected a 35V dc supply to a resistance of 600 Ohm in series with an unknown resistance R.A. voltmeter having a resistance of 1.2 kOhm is connected across 600 Ohm resistance and read 5v. The value of resistance R will be 2.4 kOhm

thumb_up_alt 0 like thumb_down_alt 0 dislike
123 views 1 answer
Description :

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Answer :

A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

thumb_up_alt 0 like thumb_down_alt 0 dislike
631 views 1 answer
Description :

The synchronous motor which works on leading power factor and does not drive any mechanical load is called?

Answer :

The synchronous motor which works on leading power factor and does not drive any mechanical load is called synchronous condenser.

thumb_up_alt 0 like thumb_down_alt 0 dislike
83 views 1 answer
Description :

Why DC motor is used for traction?

thumb_up_alt 0 like thumb_down_alt 0 dislike
71 views 0 answers
Description :

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians (A) Armature amp-conductors × (θ/360o) (B) Armature amp-turns × (θ/360o) (C) Armature amp-conductors × (1/4 - θ/360o) (D) Armature amp-conductors × (1/8 - θ/360o)

Answer :

In a 4-pole wave winding connected dc motor, the cross-magnetizing AT/pole for a brush shift of θ radians Armature amp-conductors × (1/8 - θ/360o)

thumb_up_alt 0 like thumb_down_alt 0 dislike
84 views 1 answer
Description :

Write two applications of D.C. series motor. 

Answer :

The applications of D.C. series motor: 1. Cranes 2. Hoists 3. Trolley and cars 4. Conveyors 5. For traction work i.e. electric locomotives 6. Elevator 7. Air compressor

thumb_up_alt 0 like thumb_down_alt 0 dislike
63 views 1 answer
Description :

Answer :

In a A.C. series motor armature coils are usually connected to commutator through resistance.

thumb_up_alt 0 like thumb_down_alt 0 dislike
112 views 1 answer
Description :

Answer :

In A.C. series motor compensating winding is employed to reduce sparking at the brushes.

thumb_up_alt 0 like thumb_down_alt 0 dislike
128 views 1 answer
Description :

State at least one function and the material used for the following parts of DC Motor.

Answer :

Part Function Material Yoke -Provides mechanical support for poles -Acts as protecting cover for machine -Provides path for magnetic flux Cast Iron OR Cast Steel Field Winding - ... Pole core  Provides mechanical support to field winding. Cast Iron OR Cast Steel

thumb_up_alt 0 like thumb_down_alt 0 dislike
41 views 1 answer
Description :

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is

Answer :

A 200 V dc shunt motor is running at 1000 rpm and drawing a current of 10 A. Its armature winding resistance is 2 Ohm. It. is braked by plugging. The resistance to be connected in series with armature to restrict armature current to 10 A, is 36 Ohm

thumb_up_alt 0 like thumb_down_alt 0 dislike
194 views 1 answer
Description :

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit?

Answer :

As there is no back e.m.f. at the instant of starting a D.C. motor, in order to prevent a heavy current from flowing though the armature circuit a resistance is connected in series with armature.

thumb_up_alt 0 like thumb_down_alt 0 dislike
133 views 1 answer
Description :

The effect of increasing load on a synchronous motor running with normal excitation is (A) Increase both its Ia and power factor. (B) Decrease Ia, but increase power factor. (C) Increase Ia, but decrease power factor (D) Decrease both Ia and power factor.

Answer :

The effect of increasing load on a synchronous motor running with normal excitation is Increase Ia, but decrease power factor

thumb_up_alt 0 like thumb_down_alt 0 dislike
429 views 1 answer
Description :

Answer :

For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

thumb_up_alt 0 like thumb_down_alt 0 dislike
124 views 1 answer
Description :

Answer :

The speed/load characteristics of a universal motor is same as that of D.C. series motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
76 views 1 answer
Description :

Answer :

A synchronous motor running with normal excitation adjusts to load increases essentially by increase in armature current.

thumb_up_alt 0 like thumb_down_alt 0 dislike
114 views 1 answer
Description :

The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as?

Answer :

The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as pull-in torque.

thumb_up_alt 0 like thumb_down_alt 0 dislike
237 views 1 answer
Description :

Answer :

The coupling angle or load angle of synchronous motor is defined as the angle between the rotor and the stator poles of opposite polarity.

thumb_up_alt 0 like thumb_down_alt 0 dislike
146 views 1 answer
Description :

If the load of the normally excited synchronous motor is increased the power factor will?

Answer :

If the load of the normally excited synchronous motor is increased the power factor will become lagging.

thumb_up_alt 0 like thumb_down_alt 0 dislike
116 views 1 answer
Description :

In a synchronous motor which losses varies with load?

Answer :

In a synchronous motor, copper losses varies with load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
74 views 1 answer
Description :

The synchronous motor will develop maximum power when the load angle is?

Answer :

The synchronous motor will develop maximum power when the load angle is 900.

thumb_up_alt 0 like thumb_down_alt 0 dislike
94 views 1 answer
Description :

In synchronous motor, does the winding losses vary with load?

Answer :

No, in the synchronous motor the winding losses do not vary with load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
499 views 1 answer
Description :

Answer :

The speed of a D.C. shunt motor more than its full-load speed can be obtained by decreasing the field current.

thumb_up_alt 0 like thumb_down_alt 0 dislike
101 views 1 answer
Description :

If field current is decreased in shunt dc motor, the speed of the motor (a) remains same. (b) increases. (c) decreases. (d) none of the above.

Answer :

increases

thumb_up_alt 0 like thumb_down_alt 0 dislike
2.0k views 4 answers
Description :

What would happen if a DC motor was supplied with AC ?

Answer :

With three phase induction motor, humming and not rotate, but if single phase universal motor like air blower, home mixture, motor run on constant speed..speed variation not possible...

thumb_up_alt 0 like thumb_down_alt 0 dislike
103 views 2 answers
editAsk a Question
...