menu search
person

Why starter is required for starting an induction motor?

thumb_up_alt 0 like thumb_down_alt 0 dislike
102 views

Related questions

Description :

Answer :

For starting a D.C. motor a starter is required because it limits the starting current to a safe value.

thumb_up_alt 0 like thumb_down_alt 0 dislike
66 views 1 answer
Description :

Why does induction motor have high starting current?

Answer :

In induction motor , the flux produce is quadrature to the applied voltage. Since when we are going to start motor , there is no flux present inside . So in order to lets say compensate it ... times of current to further increase flux. So that is reason for high starting current in induction motor

thumb_up_alt 0 like thumb_down_alt 0 dislike
122 views 2 answers
Description :

In a double squirrel cage induction motor, good starting torque is produced as (A) Large current flows through the outer high resistance winding. (B) Large current flows through the inner high resistance winding. (C) Small current flows through the outer high resistance winding. (D) Large current flows through the inner low resistance winding.

Answer :

In a double squirrel cage induction motor, good starting torque is produced as Large current flows through the outer high resistance winding.

thumb_up_alt 0 like thumb_down_alt 0 dislike
98 views 1 answer
Description :

Answer :

If starting winding of a single-phase induction motor is left in the circuit, it will draw excessive current and overheat.

thumb_up_alt 0 like thumb_down_alt 0 dislike
206 views 1 answer
Description :

How is a three phase cage induction motor self starting?

Answer :

Any type of induction motor is self starting. Because the reason for torqe production require two flux displaced by some angle theta.If theta is constant with time then torqe will be constant;if ... torqe also pulsating. In induction motor this angle theta is not pulsating.so it is self starting 

thumb_up_alt 0 like thumb_down_alt 0 dislike
104 views 1 answer
Description :

Is induction motor is self starting?

Answer :

Single phase induction motor is not self starting. Three phase induction motor is self starting.

thumb_up_alt 0 like thumb_down_alt 0 dislike
97 views 1 answer
Description :

Answer :

Capacitor start motor has high torque in starting

thumb_up_alt 0 like thumb_down_alt 0 dislike
97 views 1 answer
Description :

Answer :

A direct online starter is used for starting motors up to 5 H.P.

thumb_up_alt 0 like thumb_down_alt 0 dislike
66 views 1 answer
Description :

Why a dc series motor has a high starting torque?

thumb_up_alt 0 like thumb_down_alt 0 dislike
70 views 0 answers
Description :

Explain the necessity of starter for D.C. motor. State various types of D.C. motor starter. 

Answer :

Necessity of Starter for D.C. Motor: Armature current is given by equation Ia = (V−Eb)/Ra i) If the motor is at standstill or rest, back emf Eb is zero (as Eb= ZNP/(60A), at start speed N ... . Types of D.C. motor starters: i) Two point starter ii)Three point starter iii) Four point starter

thumb_up_alt 0 like thumb_down_alt 0 dislike
105 views 1 answer
Description :

Which type of starter is used to start the DC motor?

thumb_up_alt 0 like thumb_down_alt 0 dislike
64 views 0 answers
Description :

Answer :

In a manual shunt motor starter over load relay is connected in series and no volt relay in parallel with the load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
55 views 1 answer
Description :

Answer :

For the same H.P. rating and full load speed, following motor has poor starting torque differentially compounded.

thumb_up_alt 0 like thumb_down_alt 0 dislike
124 views 1 answer
thumb_up_alt 0 like thumb_down_alt 0 dislike
154 views 2 answers
Description :

List different starting methods of three phase synchronous motor. Explain any one of them.

Answer :

Different Starting Methods of Three Phase Synchronous Motor: As synchronous motor is not self starting, different methods of starting are as follows: 1) By using an Induction (Pony) motor 2) ... . The rotor gets pulled into synchronism and starts running at constant speed as a synchronous motor. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
77 views 1 answer
Description :

Answer :

The starting resistance of a D.C. motor is generally low.

thumb_up_alt 0 like thumb_down_alt 0 dislike
89 views 1 answer
Description :

Answer :

The starting winding of a single-phase motor is placed in stator.

thumb_up_alt 0 like thumb_down_alt 0 dislike
72 views 1 answer
Description :

Answer :

Starting winding of a single phase motor of a refrigerator is disconnected from the circuit by means of a magnetic relay.

thumb_up_alt 0 like thumb_down_alt 0 dislike
182 views 1 answer
Description :

Answer :

The value of starting capacitor of a fractional horse power motor will be 300 uF .

thumb_up_alt 0 like thumb_down_alt 0 dislike
82 views 1 answer
Description :

Answer :

A centrifugal switch is used to disconnect starting winding when motor has picked up about 50 to 70 per cent of rated speed.

thumb_up_alt 0 like thumb_down_alt 0 dislike
257 views 1 answer
Description :

Answer :

The rotor developed by a single-phase motor at starting is zero.

thumb_up_alt 0 like thumb_down_alt 0 dislike
64 views 1 answer
Description :

Answer :

In a capacitor start motor, the phase displacement between starting and running winding can be nearly 90°.

thumb_up_alt 0 like thumb_down_alt 0 dislike
146 views 1 answer
Description :

A synchronous motor can be made self starting by providing?

Answer :

A synchronous motor can be made self-starting by providing damper bar.

thumb_up_alt 0 like thumb_down_alt 0 dislike
111 views 1 answer
Description :

Why high starting torque is required?

thumb_up_alt 0 like thumb_down_alt 0 dislike
55 views 0 answers
Description :

The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?

Answer :

Ns         equals        f/pair pole 50/4      - 12.5

thumb_up_alt 1 like thumb_down_alt 0 dislike
137 views 2 answers
Description :

A change of 4% in the supply voltage to an induction motor will produce a change of approximately

Answer :

A change of 4% in the supply voltage to an induction motor will produce a change of approximately 8% in the rotor torque

thumb_up_alt 0 like thumb_down_alt 0 dislike
297 views 1 answer
Description :

In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will  (1) reduce to one-half (2) reduce to one-fourth (3) remain unchanged (4) increase four times

Answer :

In an induction motor if the flux density is reduced.to one-half, of its normal value then the torque will reduce to one-fourth

thumb_up_alt 0 like thumb_down_alt 0 dislike
256 views 1 answer
Description :

An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is (A) 5.06 kW (B) 0.3 kW (C) 100 kW (D) 83.33 kW

Answer :

An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is 83.33 kW

thumb_up_alt 0 like thumb_down_alt 0 dislike
143 views 1 answer
Description :

In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an external resistance in the rotor circuit and the slip is 0.15. If the rotor winding resistance per phase is 0.2 Ω, the external resistance is (A) 0.2 Ω (B) 0.3 Ω (C) 0.4 Ω (D) 0.5 Ω

Answer :

In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an external resistance in the rotor circuit and the slip is 0.15. If the rotor winding resistance per phase is 0.2 Ω, the external resistance is 0.3 Ω

thumb_up_alt 0 like thumb_down_alt 0 dislike
113 views 1 answer
Description :

Answer :

The rotor slots, in an induction motor, are usually not quite parallel to the shaft because it helps in reducing the tendency of the rotor teeth to remain under the stator teeth.

thumb_up_alt 0 like thumb_down_alt 0 dislike
125 views 1 answer
Description :

A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because?

Answer :

A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because stator supply is not required to produce magnetic field.

thumb_up_alt 0 like thumb_down_alt 0 dislike
93 views 1 answer
Description :

Answer :

An induction motor has relatively high power factor at near full load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
68 views 1 answer
Description :

Explain energy conservation technique “by improving power quality” for induction motor.

Answer :

Energy conservation method in induction motor by improving power quality: Electrical energy can be conserved by improving the power quality. It can be achieved by avoiding voltage unbalance, maintaining ... losses can be minimized by using harmonic filter thus reducing the harmonics in the system.

thumb_up_alt 0 like thumb_down_alt 0 dislike
3.0k views 2 answers
Description :

State starters used for i) 3-Ph squirrel cage induction motor (3HP) ii) D.C. motor 

Answer :

Name the starters used for following motors : i) 3 H.P. 3-Ph squirrel cage I.M: i) DOL starter OR ii) Star-Delta Starter OR ii) Auto transformer starter OR iii) Soft start starter.  ii) D.C Shunt Motor : 1) Armature resistance starter (Three Point Starter) OR 2) Four Point Starter 

thumb_up_alt 0 like thumb_down_alt 0 dislike
125 views 1 answer
Description :

A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for

Answer :

A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for 4 poles

thumb_up_alt 0 like thumb_down_alt 0 dislike
160 views 1 answer
Description :

What will happen if the induction motor runs at synchronous speed ?

Answer :

Since there is always slip present in rotor it cannot run at synchronous speed no current will be developed hence no torque will developed

thumb_up_alt 0 like thumb_down_alt 0 dislike
93 views 3 answers
Description :

Define Slip of Induction Motor.

Answer :

Slip: It is the ratio of relative speed of rotor (difference between synchronous speed and rotor speed) to the synchronous speed of rotating magnetic field.  Slip = (NS – N) / NS  where , NS = synchronous speed, N = speed of rotor

thumb_up_alt 0 like thumb_down_alt 0 dislike
38 views 1 answer
Description :

Explain the working of a single phase capacitor start induction motor. 

Answer :

Single phase capacitor start induction motor https://youtu.be/31lvvzU5Puc

thumb_up_alt 0 like thumb_down_alt 0 dislike
200 views 2 answers
Description :

State any four advantages of three phase induction motor. 

Answer :

Advantages of three phase induction motor https://youtu.be/27OIOCKN05U

thumb_up_alt 0 like thumb_down_alt 0 dislike
110 views 2 answers
Description :

In a single-phase induction motor, the operating direction is determined by the ________ A) Rotor B) Stator C) Starting circuit D) None of these

Answer :

In a single-phase induction motor, the operating direction is determined by the Starting circuit

thumb_up_alt 0 like thumb_down_alt 0 dislike
84 views 1 answer
Description :

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Answer :

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

thumb_up_alt 0 like thumb_down_alt 0 dislike
86 views 1 answer
Description :

how can we reverse the direction of rotation of three phase induction motor ?

Answer :

The direction of rotation of three phase induction motor can be reversed by plugging i.e by changing any two out of three phases of the supply to the stator of the Induction motor terminal.

thumb_up_alt 1 like thumb_down_alt 0 dislike
108 views 1 answer
Description :

Explain the working principle of induction motor. 

Answer :

Working principle of induction motor: * When the motor is excited with three-phase supply, three-phase stator winding carries three-phase currents & produces a rotating magnetic field of constant magnitude and ... , which tend to move the rotor in the same direction as the rotating magnetic field. 

thumb_up_alt 0 like thumb_down_alt 0 dislike
85 views 1 answer
Description :

Explain the activities carried out during weekly maintenance of 3 ph. Induction motor. 

Answer :

Activities Carried out During Weekly Maintenance of 3 ph. Induction Motor:  1) Check belt tension. In cases where this is excessive it should immediately be reduces and in the case of sleeve ... and cooled by oil mist systems its important to check the oil mist flow paths/pressure components.

thumb_up_alt 0 like thumb_down_alt 0 dislike
89 views 1 answer
Description :

State the function of following parts in Induction motor. (i) Stator (ii) Slip rings

Answer :

Name of part Function Stator 1) Stator frame supports the core, terminal box and protects the inner parts. 2) Stator core houses stator winding. 3) Stator winding ... ) Provides facility to connect external resistance to rotor circuit through brushes for starting and control.

thumb_up_alt 0 like thumb_down_alt 0 dislike
75 views 1 answer
Description :

List the energy conservation technique in induction motor. 

Answer :

Following are the list of energy conservation techniques in electrical motors: 1) Reduction in iron losses by using low loss silicon steel core material laminated to thinner dimension. 2) Using bigger length ... at light load. 13) By rewinding in induction motor 14) By motor survey

thumb_up_alt 0 like thumb_down_alt 1 dislike
83 views 1 answer
Description :

With a neat sketch give the working of shaded pole induction motor.

Answer :

Explanation: It has squirrel cage rotor and salient pole stator. The stator poles are shaded partially by short circuited conductor band to create the phase difference between the fluxes emerging from shaded ... rotating magnetic field in the air-gap and torque is exerted on the squirrel cage rotor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
144 views 2 answers
Description :

Explain with neat circuit diagrams the procedures to perform no load and blocked rotor tests on three phase induction motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
94 views 0 answers
Description :

Explain the need and steps to conduct the reduced voltage running up test on the three phase induction motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
65 views 0 answers
Description :

Answer :

Energy conservation technique in induction motor by minimizing idle and redundant running of motor: 1) Loss of energy as the no load power drawn is approximately about 12% to 16% of rated ... to unnecessary line losses. 4) Reduction in overall system energy efficiency over period of time.

thumb_up_alt 0 like thumb_down_alt 0 dislike
422 views 1 answer
editAsk a Question
...