What is the main purpose of electroplating?

1 Answer

Protecting  reactive  metals  from  corrosion.
Like 0 like Dislike 0 dislike

Related questions

Description : What are the applications of electroplating?

Description : Explain process of electroplating. 

Answer : Process of Electroplating:-  A DC current passed through a solution of chemical compound then the solution can be dissociated into its constituent's parts & deposition of metal takes place ... its salt. Again it dissociates & process is continued till pure metal goes into solution. 

Description : With the help of neat diagram. explain the concept and principle used in electroplating. 

Answer : Process of Electroplating:-  A DC current passed through a solution of chemical compound then the solution can be dissociated into its constituent's parts & deposition of metal takes ... its salt. Again it dissociates & process is continued till pure metal goes into solution.

Answer : In main line service as compared to urban and suburban service distance between the stops is more, maximum speed reached is high, acceleration and retardation rates are low.

Description : What is a single purpose processor?

Answer : Single Purpose Processor Single purpose processor is design to execute only one program. It perform particular computation task. So it have faster ... of single purpose processor. The datapath contains only required components.

Description : Purpose of Selective Catalytic Reduction (SCR)

Answer : Purpose of Selective Catalytic Reduction (SCR) : 1. It reduces Nox 75% to 90% 2. Converts it in to molecular nitrogen and water vapor 3. It reduces HC emission up to 80% 4. It reduces PM emission 20 to 25%.

Description : State the purpose of lighting control. List the different types of dimmer.

Answer : Purpose of Lighting Control:- 1. To turn ON or OFF the lamps 2. For dimming: The dimming control permits the adjustment of lighting over a range. 3. For changing the lighting levels ... operated dimmer 6) Triac operated Dimmer 7) PWM (Pulse width modulation) Controlled technique.

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Description : Explain the purpose of shielding and reflector in a nuclear reactor.

Answer : 1. Shielding:-  The function of sheilding is to protect environment, humens and animals from the harmful radioactive radiation (pollution).before they are emitted to atmosphere. Shilding is provided to ... :- The function of reflector is to reflect back the neutrons which are leaving from core.

Description : The colour band on the extreme left in general purpose fixed resistors represents: A) Tolerance B) First significant digit C) Wattage Rating D) Voltage Rating

Answer : The colour band on the extreme left in general purpose fixed resistors represents: First significant digit

Description : The purpose of a parallel circuit resonance is to magnify?

Answer : The purpose of a parallel circuit resonance is to magnify voltage.

Answer : The purpose of stator winding in the compensated repulsion motor is to improve power factor and provide better speed regulation.

Description : General Purpose Processor

Answer : A general purpose processor, sometimes called a central Processing Unit CPU or a microprocessor. It consists of a data path and control unit, tightly linked with a memory. The general ... system functionality.Data information represents the value being input, output and transformed by the program.

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.  

Description : What is the main disadvantage of phase advancers?

Answer : It cannot be used for motors below 20 H.P.

Description : What is the main use of a transistor?

Answer : Main use of a transistor as amplifier and as switch.

Description : What are the main causes of harmonics?

Answer : Harmonic is a non linear load because linear load voltage deviated due to connection of some electrinie device such as converter,inverter

Description : What are the main parts of a generator?

Answer : the main parts of the generator are as follows yoke Armature Poles field winding Prime mover  Commutator Shaft Bearings Brushes

Description : List the main parts of D.C. motor

Answer : Main parts of D.C. motor and their functions:  Part Functions Yoke i) Provides mechanical support for poles. ii) Acts as protecting cover for machine. iii) Carries magnetic flux. ... a fixed physical position relative to the stator.  Shaft Used to transfer mechanical power 

Description : List out main components of Diesel power station. 

Answer : Main components of Diesel power station: 1) Diesel Engine 2) Engine Air intake system 3) Engine Fuel System 4) Engine Exhaust system 5) Engine cooling system 6) Engine Lubricating system 7) Engine Starting system 8) Diesel Engine Generator (Alternator) 

Description : List out main components of Reactors. 

Answer : List the main components of Reactors:  1. Core 2. Nuclear fuel (U235) 3. Moderator 4. Control Rod 5. Reflector 6. Reactor vessel 7. Shielding  

Description : How rating of main switch and cable is selected for Industrial Installation.

Answer : 1. Rating of Main Switch or Fuse Rating is decided in industrial installation: Rating of main switch or fuse is based up the starting current of motor. For calculating starting current is considered 2 ... take 1.5 times the rated current or full load current. & thus cable rating is decided.

Description : The main advantage of AC over DC is:  (A) Conversion flexibility from one voltage level to other (B) AC can be easily converted into DC by using a rectifier (C) AC is easy to maintain & can be easily distributed at long distances (D) All of the above

Answer : Ac is easy to maintain and ac can be easily converted to dc by rectifier .There is no commutator for conversion in ac that's why ac machines are weight less and more efficiency.ac machines occupy less space than dc .

Description : The main objectives in framing tariff are:  (A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

Answer : The main objectives in framing tariff are:  (A) The consumers must readily understand the tariffs (B) The tariff must be equitable amongst different consumers (C) Tariffs can be modified from time to time (D) All of the above

Answer : In split phase motor main winding is of thick wire placed at the bottom of the slots.

Answer : Discrimination between main and back up protection is provided by the use of relays which are slow.

Answer : The main function of a fuse is to prevent excessive currents.

Description : In an electroplating solution anions are

Answer : In an electroplating solution anions are Negatively charged

Description : What is the main purpose of integration testing? a) Design errors b) Interface errors c) Procedure errors d) None of the above

Answer : Ans : b

Description : What is the main purpose of fermentation in cells? a) production of ATP b) hydrolysis of starch c) production of alcohol d) burning of hydrogen with oxygen

Answer : ANSWER: A -- PRODUCTION OF ATP

Description : What is the main purpose of white blood corpuscles? (1) to carry nutrients (2) to combat infection (3) to carry oxygen (4) to give strength

Answer : to combat infection

Description : The main purpose of evaluating listening is Options: A) to accept or reject an idea given to the listener B) to evaluate the speaker’s credibility and personality C) Both (a) and (b) D) All of these

Answer : C) Both (a) and (b) 

Description : The main purpose of the first degree in our universities should be to Options: A) Bring students to frontiers of knowledge and from there should be research B) Equip students with necessary ... to the threshold of knowledge D) Bring to the frontiers of research with necessary equipment of knowledge

Answer : A) Bring students to frontiers of knowledge and from there should be research 

Description : The main purpose of using core in a transformer is to (A) decrease iron losses (B) eliminate magnetic hysteresis (C) reduce reluctance of the common magnetic circuit (D) prevent eddy current loss

Answer : Reduce Relucatnce of the common magnetic circuit.

Description : The main purpose of permanent magnet motors are (A) to avoid the need for field supply (B) to provide high flux density (C) to provide control over flux level (D) to facilitate kW rating

Answer : The main purpose of permanent magnet motors are to avoid the need for field supply

Description : Main purpose of oil in OCB is to   (a) provide insulation (b) provide cooling of contacts (c) quenching arc (d) None of the above 

Answer : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to extinguish the arc.

Description : Explain electroplating process

Answer : Electroplating Process: Electroplating may be described as a process of covering a surface or object usually metallic with a thin adherent coating of same or other metal by electrolysis. The form of ... wear. Gold, silver and platinum plating are used in jewellery and electronic industry. 

Description : Compare Electroplating and Galvanizing.

Answer : Comparison of Electroplating and Galvanizing process: 

Description : Black lung disease occurs in people working in (1) Electroplating industry (2) Organic solvents industry (3) Paint manufacturing industry (4) Coal mines

Answer :  Coal mines

Description : In the electroplating of gold, the electrolyte used is (1) Gold chloride (2) Gold nitrate (3) Gold sulphate (4) Potassium aurocyanide

Answer : Gold sulphate

Description : The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Answer : Galvanising

Description : The metals commonly used for electroplating are (1) Gold, Sodium and Chromium (2) Chromium, Copper and Nickel (3) Nickel, Lead and Chromium (4) Gold, Sodium and Potassium

Answer : Chromium, Copper and Nickel

Description : Explain the process of electroplating of an iron spoon with silver. 

Answer : 1. Electroplating of silver on iron - spoon is carried out in a rectangular steel tank. 2. Iron spoon, which is to be electroplated, is cleaned by boiling with caustic soda in order to remove ... gets slowly dissolve in solution by giving Ag+ ions.  The schematic representation is : 

Description : Describe with labeled diagram the process of electroplating of silver.

Answer : 1. Electroplating of silver on iron - spoon is carried out in a rectangular steel tank. 2. Iron spoon, which is to be electroplated, is cleaned by boiling with caustic soda in order ... spoon gets plated with silver. Silver anode gets slowly dissolve in solution by giving Ag+ ions. 

Description : Name the effect of electric current observed in electroplating. Explain the same.

Answer : Effect of Electric Current Observed in Electroplating: Chemical effect of electric current is observed in electroplating.  Chemical Effect of Electric Current: Whenever a DC current is passed through ... of any desired metal on another material, by means of electricity, is called electroplating.

Description : Define electroplating. Give its two purposes 

Answer : Definition: - The process of producing metallic coating of more resistant metals (like Ag, Au, Ni, Cr etc.) on an article with the help of electric current is called electroplating.  Purposes of ... by electro deposition of metal in between the broken or at the defective part of the metal. 

Description : Electric supply for electroplating should be through a

Answer : Electric supply for electroplating should be through a DC source

Description : What is locomotive force?

Description : What are the industrial application of electrolysis?

← Prev Question Next Question →
Ask a Question
Choose topic