What do you mean by LSI?

1 Answer

large-scale integration (LSI) term usually used to describe the level of integration at which entire integrated circuits can be placed on a single chip. An integrated circuit made of hundreds to thousands of transistors.
Like 0 like Dislike 0 dislike

Related questions

Description : What do you mean by VHDL?

Answer : VHDL (VHSIC Hardware Description Language) is a hardware description language used in electronic design automation to describe digital and mixed-signal systems such as field-programmable gate arrays and integrated circuits. VHDL can also be used as a general purpose parallel programming language.

Description : What do you mean by “Tyndallisation” and “Pasteurisation”. State the methods of pasteurisation.

Answer : Tyndallisation : This is a fractional sterilization method. This method is used for sterilization of medicaments unstable at 1150C but able to withstand low temperature heating. This method consist of ... High Temperature Short Time (HTST) Vat pasteurization Ultra High Temperature(UHT)

Description : What do you mean by reserved percolation? Enlist different steps involved in it.

Answer : Reserve percolation:   In this process a part of percolate, generally 3/4th volume of the finished preparation is reserved.(contains high solute concentration) Then the percolation process is continued ... :  a. Imbibition, b. Maceration, c. Percolation, d. Distillation or evaporation.

Description : What do you mean by enteric coated tablet? Give reasons for enteric coating.

Answer : Enteric Coated tablet:   1. These tablets are coated with the material which does not disintegrate in stomach but passes through as it is i.e. enteric polymer e.g.: Hydroxypropyl methyl cellulose phthalate ... stomach pH. 4. Drug absorption is better in intestine. 5. Delayed action is needed. 

Description : What do you mean by eco-friendly building materials? State any two properties of it.

Answer : Eco-friendly means earth-friendly or not harmful to the environment. This term most commonly refers to products that contribute to green living or practices that help conserve resources like water and ... It reduces air pollution, land pollution & water pollution. 7. It is locally available. 

Description : What do you mean by Gross National Product? a) The total value of goods and services produced in the country b) The total value of all transactions in the country c) Depreciation in the total ... d) The total value of goods and services produced in the country and net factor income from abroad

Answer : Answer- d

Description : What do you mean by demand of a commodity? a) A desire for the commodity b) Need for the commodity c) Quantity demanded of that commodity d) Quantity of the commodity demanded at a certain price during any particular period of time

Answer : Answer- d

Description : What do you mean by a mixed economy? a) Modern and traditional industries b) Public and private sectors c) Foreign and domestic investments d) Commercial and subsistence farming

Answer : Answer- b

Description : What do you mean by under conditions of perfect competition in the product market? a) MRP=VMP b) MRP>VMP c) VMP>MRP d) None of the above

Answer : Answer- a

Description : What do you mean by the supply of goods? a) Stock available for sale b) Total stock in the warehouse c) The actual production of the good d) Quantity of the good offered for sale at a particular price per unit of time

Answer : Answer- d

Description : What do you mean by normal and reverse fault?

Answer : i) Normal fault: A normal fault is the one in which the hanging wall has apparently moved down with respect to the foot-wall  ii) A Reverse fault is one in which the hanging wall has apparently moved up with respect to the footwall A reverse fault is that thrust which dips more than 450

Description : What do you mean by symmetrical folds and asymmetrical folds. 

Answer : Symmetrical Fold: The fold in which is axial plane divides the fold equally in two parts is called as symmetrical fold. The fold may be anticline or syncline. Asymmetrical Fold: The fold in which is axial plane divides the fold unequally in two parts is called as asymmetrical fold. 

Description : What do you mean by zero circle in area measurement?

Answer : Zero Circle - It is the circle formed due to sliding of wheel of mechanical planimeter without changing the reading of circular measuring disc. It is unmeasured circular area on drawing sheet due to non-rotation of counter disc.

Description : What do you mean by overloaded constructor?

Answer : When more than one constructor function is defined in a class, it is referred as overloaded constructor. Each overloaded constructor function is invoked with respect to arguments pass in the function call.

Description : What do you mean by default argument? Give its suitable example.

Answer : Default argument  Initializing an argument with a value while defining a constructor is referred as constructor with default value. When a constructor with default value is declared in a class, it does not require object to pass value ... void main() { ABC obj1(5); ABC obj2(20,30); }

Description : What is stub? What do you mean by single stub matching.

Answer : Stub is a piece of short circuited transmission line which is used to tune out the reactance of the load when connected across the transmission line as close as possible. Single Stub Matching : ... The single stub match is perhaps the most widely used matching circuit and can match any load.  

Description : What do you mean by ‘Density of Population’? (1) Ratio of people living below poverty line to total population (2) Number of persons live per square kilometre (3) Number of persons in a city (4) Number of persons living per kilometre 

Answer : Number of persons live per square kilometre 

Description : What do you mean by active filter? State its advantages over passive filter . Define pass band & stop band with respect to filter.

Answer : Active Filter: Active Filter is formed by using active element along with the passive components.  Advantages of Active filter over Passive filter: High value of pass band gain can be obtained. It is ... pass band.  Stop Band Filter: The frequency range which is attenuated is known as stop band.

Description : What do you mean by exciting resistance and exciting reactance?

Description : What do you mean by simulation? Why it is necessary?

Answer : Simulation is functional emulation of a circuit design through software programs that use models to replicate how a device will perform in terms of timing and results. It should be ... Simulation is used for design verification: Validate assumptions, Verify logic, Verify performance (timing)

Description : What do you mean by bilateral network and unilateral network?

Answer : Bilateral Network: An element whose response is independent of direction of current flowing through it is called Bilateral element and the network, which contains only bilateral elements, is called ... response depends on the direction of current flowing through it, is called unilateral network.

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. 

Answer : Many embedded systems must continually react to changes in the system's environment and must compute certain results in real time without delay. For example, a car's cruise controller continually monitors and ... user, typically does not result in a system failure.  Version 2 EE IIT, Kharagpur

Description : What do you mean by biasing of a transistor?

Description : What do you mean by linear convolution?

Description : What do you mean by signal processing?

Description : What do you mean by signal and system?

Description : What do you mean by network theory?

Description : What do you mean by fuzzy search?

Description : What do you mean by electromagnetic field?

Description : What do you mean by secondary instruments?

Answer : The instruments which will give the direct readings are called secondary instruments

Description : What do you mean by Computer Architecture and Organization?

Description : What do you mean by frequency response of an amplifier?

Description : What do you mean by insulation coordination?

Description : The response of an LTI/LSI system is given by the _______ of input and impulse response:  (1) Convolution (2) Correlation (3) Superposition (4) None

Answer : The response of an LTI/LSI system is given by the Convolution of input and impulse response.

Description : Why do we use VLSI?

Answer : VLSI is Very Large Scale Integration. VLSI is very useful for compact design. More functionalities in smaller size. VLSI IC have small power consumption as compared to discrete components circuit. VLSI can be use for different functions in compact size.

Description : What do mean by coarse grain soil and fine grained soil.

Answer : Coarse Grain Soil:- 1. If more than 50% of soil is retained on sieve 0.075mm it is called as coarse grain soil. 2. A coarse grain soil is called as gravel if 50% or more of the ... liquid limit is less than 50% or more than 50% respectively. Organic soil are also included in fine grain soil.

Description : The brain itself cannot feel pain. While the brain might be the pain center when you cut your finger or burn yourself, the brain itself does not have pain receptors and cannot feel pain. That ... , nerves and blood vessels that are plenty receptive to pain and can give you a pounding headache.

Description : You are very busy in your personal work mean while your neighbouring retired person visits you in a relaxed and gossiping mood. In such a time how would you like to behave with that person? Options: A) ... but tell him about the time-limit D) You sit as an idle person and think of his departure

Answer : C) You give due honour but tell him about the time-limit 

Description : .tef file is input file for floorplan

Description : What are the advantages of CMOS over NMOS?

Answer : Advantages of CMOS technology over NMOS are as follows. Very low static power consumption Reduce the complexity of the circuit High density of logic functions on a chip Low static power consumption High noise immunity

Description : What is VLSI logic design?

Description : What is the propagation delay of a logic gate?

Answer : The application input pulse and the occurrence of resulting output pulse is called propagation delay of logic gate.

Description : explain skin effect in copper interconnects. what are the various ways of reducing this effect?

Answer : Skin effect generally observed in ac conductor in transmission network, in skin the current flowing through outer layer of conductor is more than iner area of conductor thus we can say the ... for reducing this effect we can use boundel conductor or used hollow conductor for power transmission

Description : What does “success” mean to you?

Description : What does friendship mean to you?

Description : TTL logic family is most popularly used industries because it  1.provides greater operating speed 2.has a good fan in & fan out 3.has easy interface with other digital circuitry 4.all the above 

Answer : It is a basically a bipolar circuit which has TTL band hate fan fan out

Description : An increase in gate’s fan-out  (A) increases the propagation delay  (B) decreases the propagation delay  (C) have no effect on the propagation delay  (D) all are incorrect

Answer : An increase in gate’s fan-out increases the propagation delay 

Description : The propagation delay in a CMOS inverter is  (A) proportional to (W/L) ratio  (B) inversely proportional to (W/L) ratio  (C) independent of (W/L) ratio  (D) depends only on W

Answer : The propagation delay in a CMOS inverter is inversely proportional to (W/L) ratio 

Description : In similar sized NMOS and PMOS transistor, NMOS is ____ than PMOS (A) Faster (B) Slower (C) Same speed (D) None of the above

Answer : In similar sized NMOS and PMOS transistor, NMOS is Faster  than PMOS

← Prev Question Next Question →
Ask a Question
Choose topic