What is a high tension power line?

2 Answers

  • 3phase long lines
Like 0 like Dislike 0 dislike
High tension power line is a high voltage of 115 kv and power line is underground transimissio used by urbun areas
Like 0 like Dislike 0 dislike

Related questions

Description : What is the advantage of high power factor?

Answer : Reduced copper losses Smaller conductor size Improve voltage regulation Increase system capability Less energy bill

Description : Power factor of the system is kept high?

Answer : Power factor of the system is kept high to reduce line losses, to maximise the utilization of the capacities of generators, lines and transformers, to reduce voltage regulation of the line.

Answer : An induction motor has relatively high power factor at near full load.

Answer : For high value of diversity factor, a power station of given installed capacity will be in a position to supply more number of consumers.

Answer : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to extinguish the arc.

Description : Why high voltage can reduce power loss?

Answer : when voltage has increased due to reduced current flow, thus power loss given by ( I^2R) will be low due to reduced current(I^2) provided that resistance (R) is constant.

Description : Why high voltage is used in power transmission?

Answer : The primary reason that power is transmitted at high voltages is to increase efficiency. ... The lower current that accompanies high voltage transmissionreduces resistance in the conductors aselectricity flows ... This means that thin, light-weight wires can beused in long-distance transmission.

Description : Define surface tension. State its S.I. unit.

Answer : Definition:- The force acting per unit length of an imaginary line drawn to surface of liquid.  OR  The surface tension is defined as the property of liquids by virtue of which the surface of a liquid is ... due to the tendency to contract and occupy minimum surface area.  S.I. unit :- N/m

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

Description : A lightening arrester connected between the line and earth in a power system  (1) protects the terminal equipment against travelling surges (2) protects the transmission line against direct ... suppresses high frequency oscillations in the line (4) reflects back the travelling wave approaching it

Answer : A lightening arrester connected between the line and earth in a power system protects the terminal equipment against travelling surges

Description : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as

Answer : For a 500 Hz frequency excitation, a 50 km long power line will be modeled as long line

Description : The reactive power transfer over a line mainly depends on

Answer : The reactive power transfer over a line mainly depends on lVsl- lVRl

Description : Pure inductive circuit takes power from the A.C. line when?

Answer : It takes power when voltage decreases and current increases.

Answer : The inductive interference between power and communication line can be minimized by transposition of the power line, transposition of the communication line.

Description : What is meant by extra high voltage transmission?

Answer : HT & LT  two types transmission in industrial line 

Description : Why is it cheaper to transmit electrical energy at high voltage?

Answer : Because of the electrical energy was step upped by transformers the transformer have high efficiency than the electric energy is cheaper

Description : Why transmission voltages are high?

Answer : If current is high then I2R losses will be more .If I2R losses is more then heat generated is more. By heat or increasing temperature resistance will also be increase which will decrease ... voltage we are decreasing current which is advantageous. That's why transmission voltages is high.

Description : State the advantages of use of high voltage in transmission of Electric power. 

Answer : Advantages: 1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases, its ... high voltage transmission line, successful interconnection of transmission line is possible than low voltage. 

Description : For high efficiency of transfer of power, internal resistance of the source should be?

Answer : For high efficiency of transfer of power, internal resistance of the source should be less than the load resistance.

Description : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is

Answer : For a short transmission line with r/x ratio of is 1.0, the regulation will be zero when the load power factor is 0.707 lead

Description : What can cause high amperage on a motor?

Answer : High  amperage  can  result  in  a motor  when the  amount  of  load  increases. when  load  increases  , it  reduces  the  rotor  speed which  increases  the  slip  at  constant  synchronous  speed ... ,  as  a  result  more  current  shall  have  been  drawn  to  maintain  the  additional  load.

Description : What is Extra High Voltage?

Description : What are the advantages of high voltage transmission?

Answer : Advantages:  1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases ... line increases  12. As transmission voltage increases power handling capacity of transmission line increases 

Description : What is a high voltage test?

Description : What is considered low voltage and high voltage?

Description : While calculating performance of medium transmission line, what assumptions are made in case of (i) Nominal 'T' Method (ii) Nominal 'TT' Method. 

Answer : (i) Assumptions are made in case of Nominal 'T' Method:  a. It is assume that line capacitance is connected at center of transmission line. b. It is assume that half ... assumed that transmission line resistance & reactance per phase is connected in between two half transmission line capacitance 

Description : What is line voltage and phase voltage? Draw balanced three phase star connected system. Show all the voltages and currents.

Description : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Answer : A 50Ω transmission line is terminated in an impedance of 20-j50. What will be the reflection coefficient? A) 0.69 B) 1.69 C) 6.9 D) 16.9 

Description : What are the losses in a transmission line?

Description : What is the difference between line and phase current?

Answer : The currents flows through phase lines is called line voltage and currents flows from phase to neutral line is called phase current

Description : What is the difference between line and phase voltage?

Answer : Line voltage  is  voltage  between two  phases R &Y  (415 v)  while  phase  voltage  is  the  voltage  between  one  phase and  a neutral  B &  N   (240 v).

Description : What is the difference between a line voltage and low voltage control system?

Description : What is the voltage in 3 phase line?

Answer : between 430 to 440 v

Description : what is mean by medium transmission line ?

Answer : The transmission line which have length between 80 km to 250 km is known as medium transmission line.

Description : what is mean by short transmission line ?

Answer : The transmission lines which have length less than 80 km is known as short transmission lines.

Description : what is mean by long transmission line ?

Answer : The transmission line which have length more than 250 km are known as long transmission lines.

Description : Limitation and application of High Voltage DC (HVDC)

Answer : Limitation and application of High Voltage DC (HVDC) :  Limitation:- 1) It is difficult to step up and step down DC voltage like AC voltage. 2) Special cooling ... conventional/non-conventional) 12) Increasing existing grid utilization. 13) Interconnection of different grids or networks

Description : Name two methods for measurement of low, medium and high resistance. Give one advantage and one limitation of V- I method.

Answer : Methods for measurement of low resistance:  1. Ammeter voltmeter method  2. Kelvin's bridge method  3. Ohm meter method  4. Potentiometer method  5. Digital/analog multi-meter ... must be infinity for perfectly accurate measurement which is not possible.  2. Connection errors.

Description : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Answer : Which of the following thyristors can be used for high frequency of operation? A) TRIAC B) DIAC C) SCR D) GTO 

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

Description : The number of cycles in which a high speed circuit breaker can complete its operation is  (A) 3 to 8 (B) 10 to 18 (C) 20 to 30 (D) 40 to 50

Answer : The number of cycles in which a high speed circuit breaker can complete its operation is 3 to 8

Description : Which type of ADC gives high resolution?

Answer : Sigma Delta, successive approximation and integrating type analogue to digital converter gives very high resolution but they have slower speed.

Description : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because (A) Of drive in diffusion of dopants & carriers. (B) Band to band transition dominates impurity ionization. (C) ... band to band transition. (D) Band to band transition is balanced by impurity ionisation.

Answer : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because Impurity ionization dominates band to band transition.

Description : All good conductors have high?

Answer : All good conductors have high conductance.

Description : Wire-wound resistors are unsuitable for use at high frequencies because they?

Answer : Wire-wound resistors are unsuitable for use at high frequencies because they exhibit unwanted inductive and capacitive effects.

Answer : For measurement of inductance having high value, we should use Hay's bridge.

Answer : For measurements on high voltage capacitors, the suitable bridge is Schering bridge.

Answer : For measuring a very high resistance we should use Meggar.

Answer : For measuring current at high frequency we should use thermocouple instrument.

← Prev Question Next Question →
Ask a Question
Choose topic