What equipment is used to measure voltage?

2 Answers

Voltmeter is used to measure the voltage.

To measure AC voltage, we use Moving iron (MI) meter.

To measure DC current, we use Moving coil(MC) meter
MI instruments measures RMS value.
MC instruments measures Average value.
Like 0 like Dislike 0 dislike

Voltmeter is used to measure voltage.

Like 0 like Dislike 0 dislike

Related questions

Description : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be  (1) unaffected (2) decreased (3) increased (4) either decreased or increased depending on the direction of the DC field

Answer : An unshielded moving iron voltmeter is used to measure the voltage in an AC circuit. The stray DC magnetic field having a component along the axis will be either decreased or increased depending on the direction of the DC field

Description : What type of meter is used to measure current?

Answer : Ammeter

Description : What is the unit of measure for voltage?

Answer : Voltage measured in volts.

Description : Piezoelectric Transducer is used to measure  (1) displacement (2) resistance (3) current (4) temperature

Answer : Piezoelectric Transducer is used to measure displacement 

Description : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Answer : Which of the following can be used to measure the capacitance of a capacitor? A) Rheostat B) Schering bridge C) Wheatstone bridge D) None of these

Description : A _________ is used to measure the stator % winding temperature of the generator.  (A) Thermocouple (B) Pyrometer (C) Resistance thermometer (D) Thermometer

Answer : A Resistance thermometer is used to measure the stator % winding temperature of the generator. 

Description : What are the main electrical equipment used in HPS ? State the function of each parts of it in brief. 

Answer : Following Main Electrical Equipment used in HPS & their function: 1. Alternator 2. Exciter 3. Transformer 4. Switchgear   Function :  1) Alternator:- Alternator is coupled to ... part from the healthy section. It contains circuit breaker, relays, switches and other control devices.  

Description : List standard voltage level used in India. 

Answer : Standard voltage level used in India: * Generation Voltage : 3.3KV, 6.6KV,11KV and 17.5 KV,21KV (Now a days generation voltage is in the range of 11KV- 33KV) * Primary Transmission voltage :- 220 ... voltages in India are 765 KV (750KV), 400KV, 220KV, 132KV, 110KV, 66KV, 33KV, 22KV, 11KV.

Description : The frequencies and voltage used in Dielectric heating are (A) 10 – 30 MHz, upto 25 kV (B) 50 – 60 Hz, upto 25 kV (C) 10 – 30 MHz, upto 100 V (D) 50 – 60 Hz, 110 V – 230 V

Answer : The frequencies and voltage used in Dielectric heating are 10 – 30 MHz, upto 25 kV

Answer : The voltage used for suburban trains in D.C. system is usually 600 to 750 V.

Answer : The under voltage relay can be used for generators, busbars, transformers, motors.

Description : What exercise equipment for the home to choose?

Answer : One of the most rapidly developing areas of the fitness industry can be safely called the manufacture of exercise equipment intended for home use. What are the common reasons for people to buy ... before your eyes. Only action combined with a good mood will help you achieve sustainable results.

Description : What is considered telecommunication equipment?

Description : How to choose commercial refrigeration equipment?

Answer : In the modern market, the range of refrigeration equipment is very wide. The following types can be considered the main ones - refrigerated showcases, refrigerated cabinets, slides, chests, ... goods. The cooling method also divides refrigeration equipment into two types: static and ventilated.

Description : How to find a repair technician for refrigeration equipment?

Answer : Very often household appliances bring us a lot of inconvenience when they fail. Sometimes you don't even expect this, but only a few minutes and you can observe a puddle on the floor, suspicious ... to weigh all the consequences and understand how safe this technique is for the health of the family.

Description : A Pyrheliometer is an instrument to measure :  (A) temperature of solar photovoltaic cell  (B) intensity of direct solar radiation at normal incidence  (C) intensity of indirect solar radiation  (D) efficiency of a solar photovoltaic cell

Answer : A Pyrheliometer is an instrument to measure : intensity of direct solar radiation at normal incidence 

Answer : To measure a resistance with the help of a potentiometer it is not necessary to standardise the potentiometer.

Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Description : Car service equipment. Is it worth saving?

Answer : Often there is a situation when, when organizing a car service, after paying for construction or rent, repairs, buying refrigerators for drinks or a coffee machine, the owner discovers that ... a high-quality vacuum cleaner will allow your car wash to distinguish itself favorably from competitors.

Description : Explain the need of maintenance of electrical equipment.

Description : State the external causes of failure of electrical equipment.

Answer : Integrating instruments are those which measure the total quantity of electricity delivered in a particular time.

Answer : Yes it can...

Answer : Voltmeter is used to measure voltage in a circuit.Ohmmeter is used to measure the resistance of a component in a circuit.

Description : Name the method used to measure following resistances:- (i) Low resistance (ii) Medium resistance (iii) Insulation resistance (iv) Earth resistance.

Answer : Following are the methods used to measure resistances:-  (i) Low resistance: 1.Voltmeter-Ammeter Method 2. Kelvin's Double bridge Method  (ii) Medium resistance: 1.Voltmeter-Ammeter Method 2. ... of Charge Method  (iv) Earth resistance : 1. Fall of Potential Method 2. Earth tester

Description : What are ways we can measure the flow of electrons?

Description : What does an electric meter measure?

Description : Draw venture meter and write steps to measure flow rate.

Answer : Venturi meter consists of three sections that is converging section, throat section and diverging section. The flow is introduced to the meter through the inlet with diameter D' . The inclined angle ... to 15o . Flow rate is proportional to the square root of the differential pressure.

Description : Explain the term reactive power. Why it is sometimes essential to measure reactive power?

Answer : Reactive power: The reactive power (Q) is defined as the product of voltage(V), current (I) and sine of angle between voltage(V) and current( I) Therefore Reactive power Q = V I ... power so that corrective measures can be taken accordingly to maintain systems power factor near to the unity.

Description : ‘PMMC instrument is not suitable to measure AC quantity’. State the reason.

Answer : The direction of force exerted on moving coil depends on the direction of current flowing through moving coil. If the direction of magnetic field is kept constant, it produces unidirectional torque if the current is ... on the coil in one cycle to zero. Hence the meter cannot read A.C. quantities.

Description : An open-circuit test on a transformer is conducted primarily to measure?

Answer : The open-circuit test in a transformer is used to measure

Description : List any four measure knobs on front panel on CRO.

Answer : Knobs on front panel of CRO: 1. Power ON- OFF 2. Intensity control 3. Focus control 4. Astigmatism control 5. Volt/Div control 6. Vertical position control 7. Invert 8. Horizontal position control 9. Synchronization. 10. Channel selection.

Description : How do you measure the speed of a motor?

Description : How do you measure power factor?

Answer : P= 1.83*V*I*[email protected] where P is power           V is voltage            I is current           COS @ is P.F [email protected]= P/(1.83*V*I)  in other way cos @ = true power/apparent power

Description : A dummy strain gage is used in a quarter bridge strain gage circuit to :  (A) compensate for changes in temperature and lead wire resistance  (B) produce more output voltage from the bridge  (C) increase the sensitivity of the bridge  (D) compensate lead wire resistance only

Answer : A dummy strain gage is used in a quarter bridge strain gage circuit to : compensate for changes in temperature and lead wire resistance 

Description : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, the voltmeter reading shows 0.99 ... resistance of the battery, in Ohm , is (A) 150 (B) 100 (C) 50 (D) 200

Answer : When the voltage across a battery is measured using a D.C potentiometer, the reading shows 1.08 V. But when the same voltage is measured using a Permanent Magnet Moving Coil (PMMC) voltmeter, ... resistance of the voltmeter is 1100 Ohm , the internal resistance of the battery, in Ohm , is 100

Answer : If the current in a capacitor leads the voltage by 80°, the loss angle of the capacitor is 10°.

Answer : For measurements on high voltage capacitors, the suitable bridge is Schering bridge.

Answer : The operating voltage of a meggar is about 100 V.

Description : Permanent magnet moving coil instruments are used for

Answer : PMME are mostly used for measuring voltage and current.

Description : Eddy current damping cannot be used for moving iron instrument because

Answer : Eddy current damping cannot be used for moving iron instrument because the presence of a permanent magnet required for such purpose would affect the deflection and hence the reading of the instrument

Answer : Commonly used instruments in power system measurement are induction.

Answer : Commonly used standard capacitor is concentric cylindrical type.

Answer : For handling greater currents induction wattmeters are used in conjunction with current transformers.

Answer : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to extinguish the arc.

Description : Voltage dependent resistors are used?

Answer : Voltage dependent resistors are used to supress surges.

Description : Why high voltage is used in power transmission?

Answer : The primary reason that power is transmitted at high voltages is to increase efficiency. ... The lower current that accompanies high voltage transmissionreduces resistance in the conductors aselectricity flows ... This means that thin, light-weight wires can beused in long-distance transmission.

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Description : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Answer : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

← Prev Question Next Question →
Ask a Question
Choose topic