Why ACSR conductor is used for overhead lines?

1 Answer

It has high tensile strength 
Like 0 like Dislike 1 dislike

Related questions

Description : State properties of conductor material used for overhead conductor. 

Answer : Following are the properties of conductor material:-   1. High conductivity :- Material should have high conductivity 2. High mechanical strength:- Material should have sufficiently high mechanical strength ... available & less costly. 9. Scrap Value: - Material should have high scrap value. 

Description : Why are overhead transmission lines not insulated?

Answer : Insulators are useful to help separate electrical conductors when they come into physical contact. Overhead Transmission Lines Are Not Insulated: The overhead transmission line is carrying extreme high voltage and ... a whole lot of thick insulation to absorb the heat produced by such high voltage.

Description : A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand?

Answer : A 3 layer, total diameter of an ACSR conductor is 5 cm. Find the diameter of each strand? 1 cm

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

Answer : Overhead lines for power supply to tramcars are at a minimum height of 10 m.

Description : What is the full form of ACSR?

Answer : Aluminum conductor steel rainforce

Answer : Overhead system can be designed for operation up to 400 kV.

Answer : Series capacitors on transmission lines are of little use when the load VAR requirement is small.

Answer : When a conductor carries more current on the surface as compared to core, it is due to skin effect.

Description : Is Aluminium a good conductor of electricity?

Answer : Yes aluminium is a conductor and it is a good conductor of electricity. But copper have better conductivity as compare to aluminium.

Description : The function of steel wire in ACSR conductors is (A) To take care of surges. (B) To reduce corona. (C) To reduce inductance. (D) To provide additional mechanical strength

Answer : The function of steel wire in ACSR conductors is To provide additional mechanical strength

Description : what is ACSR ?

Answer : Aluminium Conductor Steel Reinforced

Description : Why underground service connections are service connections are costly than overhead service connection

Answer : Reason: Underground service connection is given by underground cable. This cable is costly than bare conductor. Sometimes cable trench is required for cable laying, which requires additional cost. So underground service connections are costly than overhead service connection.

Description : Why don't we burry power lines underground ?

Answer : Because conductor used for power transmission are not insulated and if we do so it create phase to ground fault causing interruptions to supply.

Description : Differentiate between overhead transmission and underground transmission.

Answer : Points Overhead line  Underground cable Capital cost  Less More Erecting cost  Less More Time require for completion of work Less More Flexibility More ... Space consumed Space consumed  No space consumed Appearance Not good  Very good 

Description : Define service connection and state types connection and state types of overhead service connection

Answer : Service Connection:- It is the input conductor or wire which is carried out from supply company (authorities) pole to consumers' main board or premises. Types of overhead service ...  1. Overhead service connection with Bare conductor 2. Overhead service connection with weather proof cable  

Description : lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is

Answer : lf a travelling-wave travelling along a loss-less overhead line does not result in any reflection after it has reached the far end, then the far end of the line is terminated into a resistance equal to surge impedance of the line

Description : Define magnetic lines of force. Show the magnetic lines of force for bar type magnet.

Answer : Magnetic linens of force is the imaginary lines for magnetic field of magnet around it. These magnetic lines of forces are introduced by Michael Faraday. The direction of lines of force is from N-pole to S-pole. The figure shows lines of force for bar type magnet.

Description : State the effects of low power factor on efficiency and voltage regulation of short transmission lines. 

Answer : i) Effect of Low power factor on efficiency:- When power factor of load reduces current drawn by transmission line increases so copper losses in transmission line increases, hence transmission ... increases, so voltage drop in transmission line increases so regulation increases. (Become Poor) 

Description : State the classification of transmission lines depending on length of transmission lines. 

Answer : A) According to Voltage level: ( 2 Marks)  a) High voltage Transmission Line (HV) up to 33 KV  b) Extra High Voltage Transmission Line (EHV) above 33 KV up to 400 KV  c) Ultra ... Transmission Line: - The length of Long transmission Line is above 200KM and its line voltage is above 100KV

Description : Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.

Answer : 4+4=8, eight lines are required for 4x4 matrix of 16 LEDs

Description : Define magnetic lines of force. Also draw and show magnetic lines of force of a bar type magnet.

Answer : Magnetic Lines of force- These are the imaginary lines (having no physical existence) introduced by Faraday for the pictorial representation of the distribution of a magnetic field.  OR  A line of ... that the tangent at any point gives direction of the resultant force at that point. 

Description : In which of the following transmission lines, the value of the Shunt admittance should be approximated to zero ? (A) A 66 kV 35 km long line (B) A 132 kV 200 km long line (C) A 220 kV 300 km long line (D) A 400 kV 500 km long line

Answer : In which of the following transmission lines, the value of the Shunt admittance should be approximated to zero ? (A) A 66 kV 35 km long line (B) A 132 kV 200 km long line (C) A 220 kV 300 km long line (D) A 400 kV 500 km long line

Description : The purpose of guard ring in transmission lines is to  (1) reduce the earth capacitance of the lowest unit. (2) increase the earth capacitance of the lowest unit. (3) reduce the transmission lines losses. (4) reduce the reactance of the line

Answer : The purpose of guard ring in transmission lines is to reduce the earth capacitance of the lowest unit.

Description : In tuned power lines, on load :  (A) the receiving end voltage is numerically equal to the sending end voltage  (B) the receiving end current is numerically equal to the sending end current  (C) there is no voltage drop  (D) all the above

Answer : In tuned power lines, on load :  (A) the receiving end voltage is numerically equal to the sending end voltage  (B) the receiving end current is numerically equal to the sending end current  (C) there is no voltage drop  (D) all the above

Description : Which of the following is the name given to the lines of electric force which move so that its beginning traces a closed curve on a positive surface and its end traces a corresponding closed curve on the negative surface? A) Tube of surface B) Tube of lines C) Tube of force D) Tube of electricity

Answer : Which of the following is the name given to the lines of electric force which move so that its beginning traces a closed curve on a positive surface and its end traces a corresponding closed curve on the negative ... A) Tube of surface B) Tube of lines C) Tube of force D) Tube of electricity

Description : Corona loss in transmission lines can be reduced by (A) using small diameter conductors (B) using bundled conductors (C) using less spacing between conductors (D) increasing the transmission line voltage

Answer : Corona loss in transmission lines can be reduced by using bundled conductors

Description : If a 5-bus test system contains 6 transmission lines and one transformer, how many non-zero elements are there in the system Y-bus ? (A) 25 (B) 12 (C) 11 (D) 19

Answer : If a 5-bus test system contains 6 transmission lines and one transformer, 19 non-zero elements are there in the system Y-bus.

Description : What is a safe distance from power lines?

Description : How many volts are in the power lines?

Description : Explain the suitability of aluminium as an electrical conductor with respect to its mechanical and electrical properties. 

Answer : Following are requirements of conductor:- i) High conductivity :  Material should have high conductivity, So that * cross section of conductor (size) reduces, * Copper losses reduces, * So Efficiency ... . Boiling point is 1820°C 9. Specific gravity is 2.7 10. High resistance to corrosion. 

Answer : Which allows the flow electrons 

Description : reasons the transposition of conductor

Answer : Following reasons the transposition of conductor:  1. Due transposition of conductor inductance of each line is same LA = LB = LC, So drop due to inductive reactance in each line is same so ... interferences are less due to transposition.  Figure of transposition of conductor: 

Description : What is difference between Conductor and insulator ?

Answer : Conductor is a material that offers no resistance to the flow of current, while an insulator is a material that offers total resistance to the flows of current, It doesn't allowed any flows of current.

Description : What is the difference between a cable and a conductor?

Description : Which is the best conductor: silver, carbon, or iron?

Answer : Silver is the best conductor. Carbon is the semiconductor. Iron have less conductance as compared to silver.

Description : How does the resistance of a conductor compare to that of an insulator?

Answer : The resistance of a conductor can be significantly lower than the resistance of an insulator, depending on each material's atomic properties.

Description : In a metal conductor, what is a free electron?

Answer :  When many atoms are close together in a copper wire, the outermost orbital electron of each copper atom can easily break free from its home or parent atom. These electrons then can migrate easily ... random. Such electrons that can move freely from one atom to the next are called free electrons.

Description : lf the wire which is vertical to this page has electron flow downwards the conductor will have

Answer : lf the wire which is vertical to this page has electron flow downwards the conductor will have a counter-clockwise field in the plane of the paper

Description : When electric current passes through a metallic conductor, its temperature rises. This is due to?

Answer : When electric current passes through a metallic conductor, its temperature rises. This is due to collisions between conduction electrons and atoms.

Description : The thickness of insulation provided on the conductor depends on?

Answer : The thickness of insulation provided on the conductor depends on the magnitude of voltage on the conductor.

Description : The insulation on a current carrying conductor is provided?

Answer : The insulation on a current carrying conductor is provided to prevent leakage of current, to prevent shock.

Description : Heat in a conductor is produced on the passage of electric current due to?

Answer : Heat  in  a   conductor  is  produced   due  to  frictional  collision  of  electrons   flow  as  they  conduct  current.

Description : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes?

Answer : If a wire conductor of 0.2 ohm resistance is doubled in length, its resistance becomes 0.4 ohm.

Description : The resistance of a few meters of wire conductor in closed electrical circuit is?

Answer : The resistance of a few meters of wire conductor in closed electrical circuit is practically zero.

Description : Current velocity through a copper conductor is

Description : The resistance of a conductor varies inversely as?

Answer : The resistance of a conductor varies inversely as area of cross-section.

Answer : If B is the flux density, I the length of conductor and v the velocity of conductor, then induced e.m.f. is given by Blv.

Description : what is conductor ?

Answer : Conductor is the object that helps to pass the current

← Prev Question Next Question →
Ask a Question
Choose topic