search
person

What are the advantages of open loop control system?

1 Answer

Open loop control system are simple to design. Open loop control system are generally stable.
thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : What are the disadvantages of Open loop control system?

Answer : Open loop control system are less reliable. In open loop control system Optimization is not possible. Open loop control system are less accurate.

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Description : What is an example of an open loop system?

Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

Description : what is open loop and close loop control system?

Answer : A) In open loop system the input is independent         of output but output is depends on input. A-1. no feedback path in open loop s/m    -2. less accuracy than close loop s/m. Ex. Washing ...    -3. high accuracy. Ex. Air conditioner ( AC ), rocket launcher, radar          system, etc

Description : What are some examples of a closed loop system?

Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

Description : What is the automatic control system?

Description : Draw the labeled block diagram of process control system and explain each block.

Answer : Explanation - Process control system consists of process or plant, sensor, error detector, automatic Controller, actuator or control element. 1) Process or plant- process means some manufacturing sequence ... process which changes the process variable. Output of this block is denoted by u .

Description : A differentiator is not usually used in control system, because it : - (A) reduces damping  (B) increases error  (C) reduces gain margin  (D) increases input noise

Answer : A differentiator is not usually used in control system, because it : - increases input noise

Description : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system (A) crosses the real axis at +0.1 (B) crosses the real axis at -0.1. (C) crosses the imaginary axis at -0.1 (D) crosses the imaginary axis at +0.1

Answer : A unity negative feedback control system is found to have a gain margin of 20 dB. The Nyquist plot of the system crosses the real axis at -0.1.

Description : What are advantages and disadvantages of Mechatronics system? 

Answer : Advantages of Mechatronics system:  High level of integration.  Increased functionality and better design.  More use of electronics and software instead of mechanical function.  Assumes ... Its replacement is difficult, that it is difficult to change old system to new system. 

Description : What are the advantages of an interconnected system?

Description : What is the difference between a line voltage and low voltage control system?

Answer : VLSI is small and consume less power and its designing is easy.

Description : A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Answer : 1

Description : State advantages and disadvantages of radial distributor system. 

Answer : Advantages of radial distributor system: 1. Design of layout is simple. 2. Capital cost & Erecting cost is less as there is only one feeder. 3. Time required for completion of ... maintain supply to consumers when there is maintenance on feeder. 3. Voltage fluctuations are more.

Description : State two advantages of digital system over analog system.

Answer : 1. They are less susceptible to noise. 2. The effect of fluctuation in the characteristic of the components, ageing of components etc. is very small in digital circuits. 3. Digital circuits have capability of memory which makes them suitable for computers. 4. More accurate.

Description : State any four advantages of interconnected system.

Answer : Advantages of interconnected Systems: i) Reduced Overall installed Capacity: Inter connected power systems reduce the overall requirement of installed capacity for a given load area. With ... to interconnection, there is optimum utilization of available natural resources in the country.

Description : State any two commands for managing disk space and also state their use

Answer : There are primarily two commands that can be used for managing Disk space: 1. df 2. du 1. df - disk filesystem df command (short for disk filesystem) is used to show disk utilization ... the disk space used by files on a machine and crucial for disk space management on unix and linux systems.

Description : What are the different types of control systems?

Description : What are the advantages and disadvantages of automation?

Description : Problem number 6.30 from digital control and state variable methods by M Gopal (second edition)

Answer : Solution for 6.30​​​​​​

Description : What is control and automation?

Description : The open loop control system is one in which _____.

Answer : the output is independent of output

Description : _____is an open loop control system.

Answer : Field controlled D.C. motor is an open loop control system.

Answer : In an open loop control system Output is independent of control input.

Description : Which waves are demodulated by Costas loop? A) VSB B) SSB C) MSK D) DSBSC 

Answer : Which waves are demodulated by Costas loop? A) VSB B) SSB C) MSK D) DSBSC 

Description : What is the difference between a mesh and a loop?

Description : The standard for long distance analog signal transmission in process control industry is (A) 4-20 mV (B) 0-20 mA (C) 4-20 mA (D) 0-5 V

Answer : The standard for long distance analog signal transmission in process control industry is 4-20 mA

Description : The loop equation for a series RLC circuit gives

Answer : The loop equation for a series RLC circuit gives

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

Description : Write the application of the following antennas: 1) Rectangular antenna 2) Dish antenna 3) Horn antenna 4) Loop antenna 5) Yagi-Uda antenna. 

Answer : Applications:  1.Rectangular antenna  i)Used in Mobile and satellite communication ii)Used in Global Positioning System iii) Used for Radio Frequency Identification (RFID) iv) Radar  Dish ... antenna. 2. Yagi-Uda antenna is used in conditional Access System (CAS) at the decryptor.

Description : Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Answer : An electric current produced by means of electrical machine is known as generator which converts mechanical energy into electrical energy. When conductor cuts the magnetic flux, emf induced in it. (Faraday' ... upon position of armature. The nature of emf is alternating as shown by the waveform. 

Description : Define- (i) Node (ii) Loop for a DC circuit

Answer : Ans: i) Node: A point or junction at which two or more elements of network are connected is called as node. ii) Loop: A closed path for flow of current in an electrical circuit is called loop.

Description : Explain the hysteresis loop of a magnetic material with neat diagram.

Answer : Hysteresis loop of magnetic material:  The circuit arrangement for plotting the hysteresis loop is shown in figure given below. The electromagnetic part consists of a coil wound on the iron ring ... one magnetic reversal is called hysteresis loop. Meaning of hysteresis is to lag behind.

Description :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5 

Answer :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be 3 

Description : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be?

Answer : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be large.

Answer : Murray loop test can be used for location of both the ground fault and the short-circuit fault.

Description : Explain the open delta (delta-delta) test on transformer.

Description : Describe the difference between an open circuit and a short circuit.

Answer : Open circuit means the wire is cut meaning power will not flow and close circuit means wire is not cut and hence power will flow.Short circuit is the same as close circuit

Description : Why CT is never operated with an open secondary ?

Answer : CT secondary should never be kept open because it will cause saturation of the core to a high level and very high voltage will appear across the secondary which can breakdown the insulation. One terminal of PT secondary is always grounded to avoid capacitive induction and for human safety

Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W

Description : An open resistor, when checked with an ohm-meter reads?

Answer : An open resistor, when checked with an ohm-meter reads infinite.

Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

Description : During open circuit test of a transformer?

Answer : During open circuit test of a transformer primary is supplied rated voltage.

Description : Explain open emitter BJT drive circuit.

Answer : open emitter BJT drive circuit:

← Prev Question Next Question →
editChoose topic
...