What is IC 555?

1 Answer

Ic 555 is timer used for indicating time intervals which is settled in ic 
Like 0 like Dislike 0 dislike

Related questions

Description : What is IC 741?

Description : What is the full form of IC?

Answer : Instrument circuit

Description : What is the use of 555 timer?

Answer : 555 IC timer is use in timers and oscillators.

Description : Why is it called a 555 timer?

Answer : Because it have three 5k Ohm resistances.

Description : Give different types of IC.

Answer : 1. Analog IC 2. Digital IC 3. Thin and thick film ICs 4. Monolithic ICs 5. Hybrid or multichip ICs

Description : Describe the functional pin diagram of regulator IC 78XX and 79XX.

Answer : IC 78XX: Explanation: 78XX series of IC regulators is representative of three terminal devices that are available with several fixed positive output voltages. It has three terminals labeled ... can also use 25μF aluminum electrolytic capacitor. Values given may be increased without limit. 

Description : Write important features of IC 723.

Answer : Important features of IC 723: i) It can be connected to function as a positive or negative voltage regulator with an output voltage ranging from 2V to 37V. ii) Output current can be up to 150 ... . v) Built-in short circuit protection. vi) Very low temperature drift. vii) High ripple rejection.

Description : The IC chips, used in computers, is made of  (1) Iron oxide (2) Silicon (3) Graphite (4) Silica

Answer : 2 These are made on silicon wafers which is aa semi conductor. ...

Description : what is integrated circuit ?

Answer : The integrated circuit is the semiconductor chip which has lots of small size resistors, capacitors, and transistors. There are so many applications of the integrated circuit. The different Integrated circuit ... are two types of integrated circuit one is analog or linear and second is digital.

Description : Draw a labelled pin diagram of IC-555 and state function of each pin

Answer : Pin Name Purpose 1 GND Ground reference voltage, low level (0 V)  2 TRIG The OUT pin goes high and a timing interval starts when this input falls below 1/2 of ... 8 Vcc Positive supply voltage, which is usually between 3 and 15 V depending on the variation.

Description : Draw circuit diagram of Bistable multivibrator using IC-555 and explain its working.

Answer : Definition – A multivibrator which has two stable states, one can be change to other when trigger pulse is applied, known as bistable multivibrator. Circuit diagram of Bistable multivibrator using IC555

Description : Which of the following are the basic elements in a 555 timer IC? (a) Two comparators (b) A flip-flop (c) A discharge transistor (d) A resistive voltage divider  A) (a), (b) and (d) B) only (a), (b) and (c) C) only (b), (c) and (d) D) only (a), (b), (c) and (d)

Answer : Which of the following are the basic elements in a 555 timer IC? (a) Two comparators (b) A flip-flop (c) A discharge transistor (d) A resistive voltage divider  A) (a), (b) and (d) B) only (a), (b) and (c) C) only (b), (c) and (d) D) only (a), (b), (c) and (d)

Description : IC 555 is used for

Answer : IC 555 is used for Making oscillator

Description : Timer IC 555 has no pin for  A) Threshold B) Set C) Trigger D) Control

Description : What does the discharge transistor do in the 555 timer circuit?  (A) Discharge the external capacitor to stop the timing (B) Charge the external capacitor to stop the timing (C) ... capacitor to start the timing over again (D) Charge the external capacitor to start the timing over again

Description : The average of the 3 digit number, which remain the same when the digits interchange their positions is. A) 444 B) 555 C) 666 D) 777 

Answer : B) Average = (111+222+333+444+555+666+ 777+888+999)/9 =(111+999)+(222+888)+ (333+777)+(444+666)+ 555/9 =(4*1110)+555/9 =4440 + 555/9 =4995/9 =555.

Description : The output waveform of a 555 Timer is: (1) Sinusoidal (2) Triangular (3) Rectangular (4) Elliptical 

Answer : The output waveform of a 555 Timer is: Rectangular

Description : The 555 timer can be used in which of the following configurations ?  a) astable, monostable b) monostable, bistable c) astable, toggled d) bistable, tristable

Answer : The 555 timer can be used in astable, monostable configurations.

Description : Timing resistor of a monostable using 555 is 100 kOhm. The timing capacitance (in nF) required for pulsewidth of 100mS is about  A) 100 B) 300 C) 600 D) 900

Description : what are different three main IC Technologies? discuss the advantages of each of them.

Answer : The three different IC technologies are 1.Full custom VLSI2.Semi-custom ASIC3.Programmable Logic Devices (PLD)The advantages of each of them are as follows :1. Full custom VLSIAll ... Logic devices are available instantly.In PLD there is not customised logic cell or mask layer.

Description : What is a clipping circuit?

Description : What is a diode clamper circuit?

Answer : Tha faction of diode 

Description : What is the use of diode in the circuit?

Answer : Diode is a device which allows the flow of current in one direction and blocks the current in opposite direction.

Description : What is forward biased?

Description : What type of biasing is used in CE amplifier?

Description : What is emitter biasing?

Description : What do you mean by biasing of a transistor?

Description : What is a crystal oscillator?

Description : What is meant by feedback in electronics?

Description : What are oscillators in technical analysis?

Description : What is meant by 3db frequency?

Description : What do you mean by frequency response of an amplifier?

Description : What is the best frequency response?

Description : What is the frequency response of a circuit?

Description : What is the advantage of differential amplifier?

Description : What is the gain of an op amp?

Description : What is the power amplifier?

Description : What is the use of differential amplifier?

Description : What is op amp and its application?

Description : What is the use of operational amplifiers?

Description : What is the meaning of operational amplifier?

Description : What does it mean to analyze a circuit?

Description : What is DC analysis of a circuit?

Description : What is an example of an analog device?

Description : What is an analog voltage?

Description : What are the analog components?

← Prev Question Next Question →
Ask a Question
Choose topic