search
person

Why high voltage is used in power transmission?

2 Answers

In order to increase efficiency  And decreases the absorption during transmission through cables.
thumb_up_alt 0 like thumb_down_alt 0 dislike

The primary reason that power is transmitted at high voltages is to increase efficiency. ... The lower current that accompanies high voltage transmissionreduces resistance in the conductors aselectricity flows along the cables. This means that thin, light-weight wires can beused in long-distance transmission.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : What are the advantages of high voltage transmission?

Answer : Advantages:  1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases ... line increases  12. As transmission voltage increases power handling capacity of transmission line increases 

Description : Why high voltage can reduce power loss?

Answer : when voltage has increased due to reduced current flow, thus power loss given by ( I^2R) will be low due to reduced current(I^2) provided that resistance (R) is constant.

Description : State the advantages of use of high voltage in transmission of Electric power. 

Answer : Advantages: 1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases, its ... high voltage transmission line, successful interconnection of transmission line is possible than low voltage. 

Description : In voltage source converter based HVDC transmission system the active power is controlled by changing (A) phase angle of the converter ac input voltage (B) supply frequency of the converter ac input voltage (C) magnitude of the converter ac input voltage (D) DC voltage at the inverter terminals

Answer : In voltage source converter based HVDC transmission system the active power is controlled by changing phase angle of the converter ac input voltage

Description : What is meant by extra high voltage transmission?

Answer : HT & LT  two types transmission in industrial line 

Answer : The contacts of high voltage switches used in power system are submerged in oil. The main purpose of the oil is to extinguish the arc.

Description : Why high voltage test is done?

Description : Why transmission voltages are high?

Answer : If current is high then I2R losses will be more .If I2R losses is more then heat generated is more. By heat or increasing temperature resistance will also be increase which will decrease ... voltage we are decreasing current which is advantageous. That's why transmission voltages is high.

Description : What is Extra High Voltage?

Description : What is a high voltage test?

Description : What is considered low voltage and high voltage?

Description : Why is it cheaper to transmit electrical energy at high voltage?

Answer : Because of the electrical energy was step upped by transformers the transformer have high efficiency than the electric energy is cheaper

Description : Why is voltage increases before transmission?

Description : If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

Answer : By

Description : Why is AC better for long distance power transmission than DC ?

Answer : ac is more economical to transmit for long distances . wires can be made smaller by step up transformer .. since major cost are wires to transmit .. then at the end of distance step down transformer is used for commercial use.

Description : State the effects of low power factor on efficiency and voltage regulation of short transmission lines. 

Answer : i) Effect of Low power factor on efficiency:- When power factor of load reduces current drawn by transmission line increases so copper losses in transmission line increases, hence transmission ... increases, so voltage drop in transmission line increases so regulation increases. (Become Poor) 

Description : Limitation and application of High Voltage DC (HVDC)

Answer : Limitation and application of High Voltage DC (HVDC) :  Limitation:- 1) It is difficult to step up and step down DC voltage like AC voltage. 2) Special cooling ... conventional/non-conventional) 12) Increasing existing grid utilization. 13) Interconnection of different grids or networks

Description : Step-down transformer converts high voltage and low current into:  (A) How voltage and high current (B) High voltage and low current (C) Low voltage and high current (D) None of the above

Answer : Step-down transformer converts high voltage and low current into: Low voltage and high current

Answer : For measurements on high voltage capacitors, the suitable bridge is Schering bridge.

Answer : yes High Voltage side of Transformer winding have more number of turns. and low voltage side of Transformer winding have less number of turns.

Description : The permissible voltage variation in transmission and distribution system is:  (A) ± 0.1% (B) ± 1% (C) ±10% (D) ± 25%

Answer : The permissible voltage variation in transmission and distribution system is: ±10%

Description : The voltage of transmission can be regulated by  (A) Use of tap changing transformers (B) Switching in shunt capacitors at the receiving end during heavy loads (C) Use of capacitors to neutralize the effect of series reactance (D) Any of the above methods

Answer : The voltage of transmission can be regulated by  (A) Use of tap changing transformers (B) Switching in shunt capacitors at the receiving end during heavy loads (C) Use of capacitors to neutralize the effect of series reactance (D) Any of the above methods

Answer : For high value of diversity factor, a power station of given installed capacity will be in a position to supply more number of consumers.

Description : Power factor of the system is kept high?

Answer : Power factor of the system is kept high to reduce line losses, to maximise the utilization of the capacities of generators, lines and transformers, to reduce voltage regulation of the line.

Answer : An induction motor has relatively high power factor at near full load.

Description : What is a high tension power line?

Answer : High tension power line is a high voltage of 115 kv and power line is underground transimissio used by urbun areas

Description : What is the advantage of high power factor?

Answer : Reduced copper losses Smaller conductor size Improve voltage regulation Increase system capability Less energy bill

Description : Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 

Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

Description : State features of wireless power transmission. 

Answer : Features of wireless power transmission:  1. Energy delivered anywhere in the world 2. Zero fuel cost 3. Less losses 4. Less use of copper wires 5. More efficiency 6. Minimum long- ... on cables would never exist in the transmission.  7. Power theft would be not possible at all. 

Description : The power flow problem mathematical model for a linear transmission network (A) is non-linear (B) is linear (C) considers time variation of generation (D) does not consider tap-changing transformers

Answer : The power flow problem mathematical model for a linear transmission network is non-linear

Description : What is electric power generation transmission and distribution?

Answer : Generation: it wrong word at here.because it is no generation it is conversion of one form of energy into electrical form.it may by using any type of energy. Transmission is just to ... place to other by providing some modifications And distribution means use of this energy for any purpose.

Description : About trnsformer

Answer : Acc to Ohms law V=IR but it is only applicable when our resistance R is constant, as in case of transformer we take impedence which is equivalent to resistance is not constant it varies with system parameters that why Ohms law not applicable in case of transformer

Description : Is the power line voltage available in our homes a dc or an ac voltage?

Answer : The power line voltage available in our homes is AC. Mobile dwellings are the most commonly DC-supplied homes and even then they tend to include AC supply for heavier loads.

Description :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when A) ZL = R B) ZL = jXS C) ZL = R-jXS D) ZL = R+jXS 

Answer :  An independent voltage source in series with an impedance ZS=R+jXS delivers a maximum average power to a load impedance ZL when ZL = R-jXS

Description : In an alternator at lagging power factor the generated voltage per phase as compared to that at unity power factor?

Answer : In an alternator, at lagging power factor the generated voltage per phase as compared to that at unity power factor must be more than terminal voltage.

Description : Find power delivered by voltage source

Answer : Find power delivered by voltage source

Description : A transformer has negative voltage regulation when its load power factor is   (1) Zero (2) Unity (3) Leading (4) Lagging

Answer : Leading

Description : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is

Answer : For a 15-bus power system with 3 voltage controlled buses, the size of Jacobian matrix is 25 x 25

Answer : The mechanical power developed by a shunt motor will be maximum when the ratio of back e.m.f. to applied voltage is 0.5.

Description : Minimum voltage regulation occurs when the power factor of the load is?

Answer : Minimum voltage regulation occurs when the power factor of the load is leading.

Description : If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?

Answer : 128 volts ,2048 watts

Description : What are the losses in a transmission line?

Description : Why does increase in current mean a decrease in voltage?

Answer : This is because current flows from high potential to low potential to bring the two diffrent potential to unity , thus  a reduced potential (voltage)

Answer : MOSFET provides better efficiency at high frequency and its high speed switching losses are less hence MOSFET is used for high frequency.

Description : How many insulator disc used for 33 kV transmission voltage line?

Answer : 5,As 33kv is Vrms

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Description : A Unified Power Flow Controller (FACTS controller) is a voltage source converter based (A) Inter-phase power controller (B) Static Compensator (C) Combination of series and shunt compensators (D) Solid-state series compensator

Answer : A Unified Power Flow Controller (FACTS controller) is a voltage source converter based Combination of series and shunt compensators

Description : Why a dc series motor has a high starting torque?

Description : Why high starting torque is required?

Description : Why does induction motor have high starting current?

Answer : In induction motor , the flux produce is quadrature to the applied voltage. Since when we are going to start motor , there is no flux present inside . So in order to lets say compensate it ... times of current to further increase flux. So that is reason for high starting current in induction motor

← Prev Question Next Question →
editChoose topic
...