search
person
Give the circuit analysis of current source inverter with resistive load. What are the main difference between voltage source inverter and current source inverter?

1 Answer

 
done_all

Current source inverter (CSI):

In current source inverter, the output current is independent of load. The input current of current source inverter is constant. Current source converter converts DC input current to AC output current. Output AC frequency depends on triggering of SCRs. The input to the current source inverter is the current source which is obtained by connecting large inductor in series with a voltage source. The switches (i.e. SCRs) of current source must be able to block reverse voltage. The diodes are connected in series to each switch to block reverse voltage. Current source inverter does not require freewheeling diode, this reduces the size and weight of current source inverter.

image

image



Difference between Voltage Source Inverter (VSI) and Current Source Inverter (CSI) is as follows:

Voltage Source Inverter (VSI) Current Source Inverer (CSI)
In voltage source inverter input voltage is kept constant. In current source inverter input current is kept constant.
An output voltage is independent of load. The output current is independent of load.
VSI required feedback diode. CSI does not require feedback diode.
Commutation circuit of VSI is complicated as compare to CSI. Commutation circuit of CSI is simple as compare to VSI. Only diodes and capacitors are required for commutation.
BJT, MOSFET, IGBT, and GTO with self-commutation can be used in VSI. BJT, MOSFET, IGBT, and GTO cannot be used in current source inverter because these devices have to withstand large reverse voltage.
Output current changes with load. Output voltage changes with load.
Voltage source inverter requires capacitor in parallel. Current source inverter require large reactor at output stage.
VSI has a slow response than CSI. CSI has a faster response than VSI.
Voltage source inverter uses current commutation. Current source inverter uses voltage commutation.
In VSI diodes are connected in parallel. In CSI diodes are connected in series.


thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is :

Answer : A 3-phase voltage source inverter operates in 180° conduction mode with a star connected resistive load. If input dc voltage is 100 V, then the peak to peak output line voltage is : 200 V

Description : What is Voltage Source Inverter (VSI) ?

Answer : Voltage Source Inverter (VSI)  Inverter is device which converts Direct Current (DC) to Alternating Current (AC). There are two types of inverters one is Voltage source inverter ... VSI consist of two load terminals and three phase VSI consist of three load terminals.

Description : Nodal analysis problem two current source

Answer : Nodal analysis problem two current source

Description : Single-phase Midpoint controlled rectifier with Resistive load

Answer : Single-phase Midpoint controlled rectifier with Resistive load:  1) During positive half cycle of AC supply, a is positive with respect to b , this makes T1 forward biased and T2 is reverse ... voltage reverses the polarity and T2 is turned off. The operation is as shown in waveforms.

Description : A voltage source inverter will have better performance if its  (1) load inductance is small and source inductance is large.  (2) both load and source inductance are small.  (3) both load and source inductances are large.  (4) load inductance is large and source inductance is small. 

Answer : A voltage source inverter will have better performance if its load inductance is large and source inductance is small. 

Description : A voltage source inverter is normally employed when  (1) source inductance is large and load inductance is small (2) source inductance is small and load inductance is large (3) both source and load inductance are small (4) both source and load inductance are large

Answer : 3

Description : Describe the difference between direct and alternating current.

Answer : Direct current is the flow of electricity or charge in one direction..  Alternative current is the flow of charge that doesn't flow in one direction. 

Description : What is the difference between eddy current and hysteresis loss?

Answer : Loss occurred by magnetising and demagnetising process is called histerisis loss and the current flowed due to the magnetic field produced by the electric field applied is called eddy current losses

Description : What is the difference between line and phase current?

Answer : The currents flows through phase lines is called line voltage and currents flows from phase to neutral line is called phase current

Description : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Answer : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Description : Nodal analysis example with voltage source and supernode

Answer : Nodal analysis example with voltage source and supernode

Description : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is

Answer : A 3 -phase, fully controlled, converter is feeding power into a DC load at a constant current of 150 A, the rms value of the current flowing through each thyristor of the converter is 150/√3

Description : Find current through resistor using nodal analysis

Answer : Find current through resistor using nodal analysis

Description : Find the current through 4 ohm resistor by source transformation

Description : Source transformation voltage source to current source and vice versa

Answer : Source transformation voltage source to current source and vice versa

Description : A current controlled voltage source is equivalent to :  (A) series voltage feed -back amplifier (B) shunt current feed -back amplifier (C) shunt voltage feed -back amplifier (D) series current feed -back amplifier

Answer : A current controlled voltage source is equivalent to : shunt voltage feed -back amplifier

Description : Which of the following theorems enables a number of voltage (or current) source to be combined directly into a single voltage (or current) source. (1) compensation theorem (2) reciprocity theorem (3) superposition theorem (4) Millman's theorem

Answer : Which of the following theorems enables a number of voltage (or current) source to be combined directly into a single voltage (or current) source. (1) compensation theorem (2) reciprocity theorem (3) superposition theorem (4) Millman's theorem

Description : A network that consists of at least a voltage source or current source is called A) Active network B) Ideal network C) Sourced network D) Outsourced network

Answer : A network that consists of at least a voltage source or current source is called Active network

Description : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, (A) 0, ∞ (B) ∞, ∞ (C) ∞, 0 (D) 0,0

Answer : The internal resistances of an ideal current source, and an ideal voltage source are, respectively, ∞, 0

Description : What is the difference between beta and forced beta for BJT?

Description : What is the difference between forward and reverse bias?

Answer : Forward bias is a PN junction bias which allows current to flow through the junction. Forward bias decreases the resistance of the depletion layer. Reverse bias is a PN junction bias that allows only ... Positive polarity on the n-type material and negative polarity to the p-type material.

Description : Explain why potential difference is necessary to produce current in a circuit.

Description : In a pure resistive circuit, the average power Pavg is ______ the peak power Pmax. (1) Double (2) One-half of (3) One-fourth (4) Equal to

Answer : In a pure resistive circuit, the average power Pavg is One-half of the peak power Pmax.

Description : In a pure resistive circuit?

Answer : In a pure resistive circuit current is in phase with the voltage.

Description : What is the power factor of purely resistive circuit.

Answer : Unity that is 1

Description : Nodal analysis example with dependent current source

Answer : Nodal analysis example with dependent current source

Description : Describe the difference between an open circuit and a short circuit.

Answer : Open circuit means the wire is cut meaning power will not flow and close circuit means wire is not cut and hence power will flow.Short circuit is the same as close circuit

Description : what is the difference between AC and DC current ?

Answer : AC is generated using Alternator. DC is generated using DC generator. AC changes its direction periodically. DC do not change its direction periodically. AC have non zero frequency. DC have zero ... Power factor of AC is between 0 and 1. But power factor of DC is always 1.

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Description : The sequence components of current of a single-phase load connected to a 3-phase system are (A) equal positive and negative sequence components (B) equal positive, negative and zero sequence components (C) vector sum of sequence currents is zero (D) algebraic sum of sequence currents is zero

Answer : The sequence components of current of a single-phase load connected to a 3-phase system are equal positive, negative and zero sequence components

Description : For a transformer, operating at constant load current, maximum efficiency will occur at?

Answer : For a transformer, operating at constant load current, maximum efficiency will occur at unity power factor.

Description : In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of?

Answer : In a step-down transformer, there is a change of 15 A in the load current. This results in change of supply current of less than 15A.

Description : Why thyristor are not preferred for inverter?

Description : Explain three phase bridge inverter.

Answer : Three phase bridge inverter: Three phase bridge inverter converts DC voltage input to three-phase variable frequency variable voltage output. DC voltage source can be a DC source or output of the rectifier. ... in proper sequence. The switch may be thyristor or IGBT etc.

Description : ln HRC fuse the time between cut-off and final current zero is called

Answer : ln HRC fuse the time between cut-off and final current zero is called the arcing time

Description : What is the relationship between power and current?

Answer : P = I2R Where P = power I = Current R = Resistance This the relationship between current and power.

Description : State the difference between energy conservation and energy audit. 

Answer : energy conservation Energy audit It is reducing the growth of energy consumption by avoiding unnecessary usage of energy It is an inspection, survey & analysis of energy flows ... Various measuring instruments, with proper sensing elements are required for the energy audit. 

Description : What is the difference between a cable and a conductor?

Description : Write difference between absolute & secondary instrument.

Answer : Absolute Instrument Secondary Instrument 1. These give magnitude of quantity in terms physical constants of instruments 1. These give reading directly of the quantity at the time of ... Raleigh current balance. 6. Examples - ammeter, voltmeter, amperehour meter, wattmeter etc.

Description : Distinguish between AC and DC.

Answer : Particulars Direct Current Alternating Current Definition It is the current whose magnitude and direction do not change with respect to time. It is the current whose ... system, electroplating, Battery charging, Traction. AC machines, Domestic and industrial supply.

Description : What is the difference between relay and contactor?

Answer : Relay have smaller ratings. Contactor is a high rating relay.

Answer : In a single phase power factor meter the phase difference between the currents in the two pressure coils is exactly 90°.

Answer : A differential relay measures the vector difference between two or more similar electrical quantities.

Description : What is the difference between BJT and FET?

Answer : BJT  is  a  current  opperated   transistor  while  FET   is  a  field   opperated  transistor.

Description : What is the difference between a soft start and a VFD?

Description : What is the difference between an AC and DC generator?

Answer : The generator which generates DC voltage is called DC generator and generator which generates AC voltage is called AC generator (or) Alternator. In DC generator armature is rotated and field winding ... generator. A DC generator can generate low voltages but an AC generator can generate upto 11kv.

Description : What is the difference between synchronous and asynchronous generator?

Description : What is the difference between synchronous and asynchronous motors?

Answer : The motor which rotates at constant speed is called synchronous motor. And that constant speed is called as synchronous speed.  And the motor which does not rotates at constant speed are called asynchronous motor. Asynchronous motor is also called as Induction motor.

Description : What is the difference between an anode and a cathode?

Answer : The anode is positively charged electrode and the cathode is negatively charged electrode.

← Prev Question Next Question →
editAsk a Question
...