List and explain the various functions supported by Linux/RTLinux.

1 Answer

Answer :

Various functions of RTLinux is as follows:

Interrupt handling functions


Like 0 like

Related Questions

Description : What is meant by embedded Linux?

Last Answer : Linux is the operating system if we use this operating system in embedded system devices then it is known as embedded Linux. Linux is open source and free.

Description : What are the advantages of using Linux?

Last Answer : Advantages of Linux are as follows :Linux is open source and free.Linux Is multiuser and multitasking operating system.Linux is the stable operating system.Linux is reliable.Linux can be modify according to requirements.Linux is the secure operating system.

Description : Linux Kernel Architecture

Last Answer : Linux Kernel Architecture: The kernel is a layer between Linux OS and hardware. When Linux is running in main memory it is divided into two parts one is user space and second is kernel space. 1.User Space 2.Kernel Space

Description : Describe the various blocks and their functions in pipelined ADC architecture.

Description : In relation to embedded Linux how TCP/IP networking is done? Explain network configuration.

Description : List  functions of MEDA. 

Last Answer : Functions of MEDA:  1. To decide long term energy conservation policy's for Maharashtra state. 2. To coordinate with central government organization i.e NPC, MNRE etc for energy conservation policy ... our society. 6. To decide penalty, incentive, subsidy for energy conservation at state level. 

Description : What is mean by the term “load average” within a Linux context, and how is it assessed on a Linux system?

Last Answer : Load average refers to the average number of processes in the run queue, i.e. processes that are either running on the CPU, waiting for the CPU, or in an uninterruptible sleep state waiting on I/ ... among the most widely used. It can also be assessed by reading the contents of /proc/loadavg.

Description : What is the first process started on Linux? What is the config file for init and what does it contain?

Last Answer : „init, PID 1. /etc/inittab. It contains info about runlevels, the default run-level, specific traps (crtl+alt+del) and some daemons that need to be started by init and monitored if respawn is specified (a good example are the physical consoles available on the server tty1, tty2)‟

Description : How to shrinking root FS in linux?

Last Answer : While online enlarging is no problem, you have to umount for shrinking! We assume lv_root have 10g, now going to shrink with 1g so after shrinking root FS should be 9g. At first take backup (NEVER SHRINK ... 9G" . Then reduce the size of the logical volume "lvreduce -L -1G /dev/rootvg/lv_root"

Description : How to Emulate Windows on Linux ?

Last Answer : How to Emulate Windows on Linux Open-source may be the in thing for many computer users, but most people who are used to Microsoft Windows may still be tentative to use it, or do not have ... you can run some of the most useful programs in Windows without ever having to leave the Linux platform.

Description : How to Double Boot Linux and Windows ?

Last Answer : How to Double Boot Linux and Windows Computer experts have their own opinions on what operating system is best suited for a computer, but many of them prefer to use a double-boot system that ... these steps, you can multi-boot to Linux or Windows to maximize your choices in computer applications.

Description : State any four functions of BIOS

Last Answer : The BIOS (Basic Input Output System) provides the processor with the information required to boot the system from a non-volatile storage unit (HDD, FDD, CD or other). It provides the system ... lifetime. To check for updated BIOS, users can check the website of the specific hardware vendor.

Description : State functions of the following pins of IC555.

Last Answer : 1) Control: - The dc Voltage at this pin is 2/3 Vcc. An external voltage applied to this changes threshold as well as trigger voltage to obtain pulse width modulated output.  2) Trigger: - The ... greater than 2/3 Vcc . When the voltage goes below 1/3 Vcc, output of the timer goes high.

Description : Adding Sinusoidal Functions

Last Answer : Adding Sinusoidal Functions

Description : Express the following functions in cosine form

Last Answer : Express the following functions in cosine form

Description : Describe the functions of General purpose registers of 8086 microprocessor.

Last Answer : (i) General Purpose Registers of 8086 1. AX (Accumulator) - Used to store the result for arithmetic / logical operations All I/O data transfer using IN & OUT instructions use A ... Index - acts as the destination for string movement instructions Used to hold offset address of Extra segment.

Description : State the functions of National Productivity Councils

Last Answer : Functions of National Productivity Councils: i. Consultancy to organizations on productivity improvement ii. Training to personnel at different levels iii. Dissemination of Productivity information ... . iv. Productivity Research and Database v. Productivity Publications vi. Productivity Awards

Description : State the functions of fuel system and exhaust system of a diesel power station.

Last Answer : Fuel system: It supplies fuel to engine for combustion purpose. It consists of Fuel Pump: - It supplies fuel to engine for combustion purpose. Strainer: - Are provided to remove suspended impurities and ... most of the noise. Chimney:- To exhaust gases in the atmosphere as high as possible. 

Description : Write the functions of re-heater in steam plant.

Last Answer : Functions of re-heater:- In Re-heater temperature of exhausted steam from HP turbine is increased by passing exhausted steam again to boiler.

Description : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Which of the following gates can be used to realize all possible combinational logic functions?  (i) OR gate (ii) NOR gate (iii) Exclusive OR gate (iv) NAND gate (v) AND gate  (A) (iii), (iv) and (v)  (B) (i), (iii) and (iv)  (C) (ii) and (iv)  (D) (i) and (v)

Last Answer : Various features of Linux that are used in embedded systems are as follows : Linux is multiuser operating system. Linux is open source and free. Linux can be ... Linux supports handling of errors. Real-time Linux supports the group scheduling functions.

Description : How to scan ISCSI Storage on VMware ESX?

Last Answer : Enable the sofware iSCSI initiator in VMware ESX Server Create VMKernel port for software iSCSI in VMware ESX Server Setup Dynamic Discover in VMware ESX Server Create VMFS volume from VMware ESX Console Create VMFS Data Stores in VMware ESX Server

Description : What happens if 4 hosts have failed and a 5th one also fails?

Last Answer : That depends. If you have admission control enabled, if there are any resource constraints some VM's may not restart. If you have admission control disabled, the VM's will get restarted ... you have enough port groups configured on your vSwitch for your Virtual Machine port group to accommodate

Description : How does HA works? Port number? How many host failure allowed and why?

Last Answer : Maximum allowed host failures within a HA cluster is 4.

Description : You have just installed a new network card on RHEL 5 server. When the server is booted up, it does not appear to recognize the new card. What steps do you take to diagnose and correct the issue?

Last Answer : Typically this is a driver issue. Check first that the card is visible on the PCI bus with lspci . Check to see if necessary kernel modules are loaded (with lsmod ). If they are not, ... module from HW vendor keep asking to see if the candidate is familiar with the tainted kernel concept.

Description : How to extend filesystem with extending same LUN without impacting production/multipathing?

Last Answer : At first identify the LV/VG & LUN (which is coming from SAN). Extend the LUN from storage side. Rescan existing LUN, delete & add paths one by one on multipath and resize the multipath. Execute pvresize, extend the LV and resize the LV.

Last Answer : Linux Kernel Architecture

Description : Explain the various steps involved in designing a custom single-purpose processor.

Last Answer : A single purpose processor is a digital circuit designed to execute exactly one program. It is also known as co-processor, accelerator or peripheral. It contains only ... for small quantities. Performance may not match general-purpose processors for same applications.

Description : What are various interrupts supported by TMS 320 c54 processor?

Last Answer : The C54x DSP supports both software and hardware interrupts: ✔ A software interruptis requested by a program instruction (INTR, TRAP,or RESET) ✔ A hardware interrupt is requested by a ... interrupt ports. ✔ Internal hardware interrupts are triggered by signals from the on-chip peripherals.

Description : Which of the following functions is typically supported by a software quality information system? I. Record keeping II. System design III. Evaluation scheduling IV. Error reporting A.I, II&III B.II, III &IV C.I, III &IV D.I, II & IV

Last Answer : C.I, III &IV

Description : Explain various functions of PPC. in detail.

Last Answer : Various functions of PPC Production Planning: This is the preliminary function of PPC in which planning of production activity is determined considering forecasting, market research, ... involves four stages namely observation, analysis, corrective action and post operation evaluation.

Description : Pick up the incorrect statement from the following: (A) The various functions under each activity, are shown by one bar on Bar Charts (B) Bar chart establishes the interdependency of one event on another (C) Only approximate percentage of the completed work is reported (D) None of these

Last Answer : (B) Bar chart establishes the interdependency of one event on another

Description : List and describe three general approaches to improve designer productivity.

Last Answer : Automation: The task of using a computer program to replace manual design effort. The program replaces manual design effort. Synthesis. Reuse: The ... correctness/completeness of each design step. Hardware/software co-simulation.

Last Answer : A design metric is a measure of a implementations features such as cost, size, performance and power.Commonly used design metrics are:1.NRE cost:NRE stands for non recurring engineering cost. ... to check that manufacturing was correct.11.Safety:The probability that the system will not cause harm.

Description : List the various equipment’s used for liquid mixing and explain how vortex formation can be avoided in liquid mixing. 

Last Answer : Equipment used for mixing of liquid:  1. Propeller mixture. 2. Turbine Mixture. 3. Paddle mixture. Vortex formation can be avoided in liquid mixing by making the following changes in the position of the ... the side of vessels. 4. Using push pull propeller. 5. Using baffles.

Description : What is aseptic technique? List the various sources of contamination and explain the sterility test.

Last Answer : Aseptic technique:  The method which is used to prevent the access of microorganism during the preparation of parenteral product and their testing are called Aseptic Technique . Sources of contamination: 1) ... the sample is declared to have pass the test and same test is repeated for two times.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Description : List various surface finishing processes. Explain lapping.

Last Answer : List of Surface Finishing Processes: [1] Grinding [2] Honing [3] Lapping [4] Burnishing [5] Buffing [6] Polishing Lapping Lapping is basically an abrasive process in which ... constantly changing. The effective path is of cycloid in nature. Figure shows the lapping process.  

Description : List various minor losses in fluid flow. Explain any one type with sketch and formula.

Last Answer : List various minor losses a) Sudden expansion of pipe b) Sudden contraction of pipe c) Pipe fittings d) Bend in pipe e) Loss of head at Entry. f) Loss of ... The head loss resulting from pipe expansion may be greatly reduced by introducing gradual pipe transition known as diffuser. 

Description : List out various position sensors. Explain any one in detail.

Last Answer : List : 1)Potentiometer 2) Eddy current sensorproximity sensor 3)Capacitive sensor 4)Hall effect sensor 5)Optical sensor/photo electric sensor 6)Inductive sensor Example :  Capacitive sensor: ... voltage which can be consider as error and actuator will move according to correct position. 

Description : List the categories of functions and explain any one with example.

Last Answer : Different categories of function: 1) Function with no arguments and no return value. 2) Function with arguments and no return value. 3) Function with no arguments and return value. 4) Function with ... have 4 and y will have 5 as their values and s will store value returned by the function.

Description : What Are The Various Functions /features In Purchasing?

Last Answer : The purchasing view consists of RFQ / Quotation, Purchase Requisition (PR), Purchase Order (PO), Master Data that has several fields like info record, source list, conditions, vendors etc. and finally Outline Agreements.

Description : The electronic circuits which implement the various logic operations are called ________ (a) Logic gates (b) Boolean algebra (c) amplifier gain (d) logic functions

Last Answer : a) Logic gates

Description : The functional approach to leadership emphasises that (a) the various functions of leadership cannot be shared among members of a group (b) leadership resides in a particular person and not in the ... person and that the various functions of leadership can be shared amongst members of a group.]

Last Answer : (d) neither of the above

Description : Enlist the various functions of PPC. Describe: (i) Scheduling (ii) Routing in details.

Last Answer : Functions of PPC: Function related to material selection. Function related to selection of method. Function related to selection of machines and equipment. Routing. * Estimating. Loading ... of operation, machine used, tools and gauges used and standard time for any particular operation.

Description : Enlist the various functions of PPC.

Last Answer : Functions of Production Planning and Control (PPC):  [1] Material Function: It includes the specification of materials, delivery dates, variety reduction procurement (Standardization) and make or ... all the factors influencing PPC which helps to identify the weak spots and corrective action.

Description : Explain placement, routing, and sizing.

Last Answer : Placement: The task of placing and orienting every transistor somewhere on IC. Routing: The task of running wires between the transistors without inserting other wires or transistors. ... wires and transistor provide better performance but consume more power and require more silicon area.

Last Answer : Common computation models: Sequential program model Statements, rules for composing statements, semantics for executing them Communicating process model ... Object-oriented model For breaking complex software into simpler, well-defined pieces

Description : Explain the advantages and disadvantages of using memory I/O and standard I/O.

Last Answer : Memory mapped I/O and standard I/O are the two methods for communicating microprocessor with peripherals. Processor talks to both memory and peripheral using the same bus.Two ways to talk to a peripheral. ... of standard I/O is no loss of memory addresses to the use as I/O addresses.

Show MoreNext Page → ← Prev Page