search
person
What is the unit of reactance?

1 Answer

Unit of reactance is Ohms ( Ω ) .Reactance is denoted by X .

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : What is the inverse of reactance?

Answer : Inverse of reactance is Susceptance .Unit of Susceptance is Siemens.

Description : what is the reciprocal of reactance?

Answer : reciprocal of reactance is susceptance.

Description : Capacitive reactance

Answer : Capacitive reactance formula

Description : Parallel Reactance and Resistance Example 1

Answer : Parallel Reactance and Resistance Example 1

Description : AC Circuits with Resistance but No Reactance

Answer : AC Circuits with Resistance but No Reactance AC Circuits with Resistance but No Reactance Series resistances let two resistances R 1 and R 2 are connected in series as shows in figure and there ... voltage. Voltage V A is common to both the branch hence voltage V A is common reference.

Description : Capacitive reactance is more when?

Answer : Capacitive reactance is more when capacitance is less and frequency of supply is less.

Description : What do you mean by exciting resistance and exciting reactance?

Description : Define impedance diagram and reactance diagram.

Answer : Impedance diagram: Impedance diagram is the simplified equivalent circuits of single line or one line diagrams of power system in which all components are represented by their equivalent circuit.  ... machines are neglected and is used only for fault current calculation is called reactance diagram.

Description : If the % reactance upto the fault point is 20%, then the short circuit current will be

Answer : If the % reactance upto the fault point is 20%, then the short circuit current will be 5 times the full load current

Description : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he

Answer : A single phase transformer has resistance and reactance of 0.2 pu and 0.6 pu respectively. Its pu voltage regulation at 0.8 pf lagging would he 0.52

Description : Consider the following statements. Which of these statements are correct ?  (1) Reactance relays are preferred for ground fault relaying  (2) Impedance relays are most suitable for:protecting long transmission lines  (3) Mho relays are best suited for long transmission line protection  (4) Reactance relays are widely used for protection of Medium transmission lines  (A) All of them (B) (1) and (3) (C) (2) and (4) (D) (1), (2) and (4)

Answer : Consider the following statements. Which of these statements are correct ?  (1) Reactance relays are preferred for ground fault relaying  (2) Impedance relays are most suitable for:protecting long transmission lines  (3) Mho relays are ... (1) and (3) (C) (2) and (4) (D) (1), (2) and (4)

Description : Reactance relay is normally preferred for protection against

Answer : Reactance relay is normally preferred for protection against earth faults

Description : Ratio of the rotor reactance X to the rotor resistance R for a two-phase servo motor (A) is equal to that of a normal induction motor (B) is less than that of a normal induction motor (C) is greater than that of a normal induction motor (D) may be less or greater than that of a normal induction motor

Answer : C

Description : A 4000 kVA, 11 kV/132 kV delta-star connected 3-phase transformer has reactance, x1 = 0.12 p.u. The actual value of x1 referred to the low voltage side is (A) 0.85 Ω (B) 3.63 Ω (C) 36.3 Ω (D) 252 Ω

Answer : A 4000 kVA, 11 kV/132 kV delta-star connected 3-phase transformer has reactance, x1 = 0.12 p.u. The actual value of x1 referred to the low voltage side is 3.63 Ω

Description : A reactance relay is (A) Voltage restrained directional relay (B) Directional restrained over-current relay (C) Voltage restrained over current relay (D) Directional restrained over voltage relay

Answer : A reactance relay is Directional restrained over-current relay

Description : What is the smallest unit of a compound with the same chemical characteristics?

Answer : The molecule is the smallest unit of a compound with the same chemical characteristics.

Description : What is the SI unit of conductivity ?

Answer : The SI unit of conductivity Siemens/m.

Description : What is the SI unit for magnetic reluctance? A) Ampere B) Ampere-turns per weber C) Henry D) None of these

Answer : What is the SI unit for magnetic reluctance? A) Ampere B) Ampere-turns per weber C) Henry D) None of these

Description :

Answer : Flux density is denoted by B. And it is given as B = flux/ area Where, the unit of flux is Weber and unit of area is meter square. So the unit of flux density is weber per meter square which is also called as Tesla.

Description :

Answer : Unit of power is Watt denoted by capital W .

Description :

Answer : Unit of voltage is volt denoted by capital V .

Description :

Answer : Unit of resistance is Ohm.

Description :

Answer : Unit of work is Joule denoted by capital J .

Description :

Answer : Unit of frequency is herzt

Description :

Answer : Unit of inductance is Henry denoted by capital H .

Description : Define resistivity. State its unit.

Answer : Resistivity can be defined as the resistance of a conducting material per unit length with unit area of cross section. Its unit is ohm/meter

Description : Electrical quantities (symbol and basic unit)

Answer : Electrical quantities (symbol and basic unit)

Description : Write the purpose of coal and ash handling unit. Also write different activities that arc carried out in this unit.

Answer : Purpose of coal and ash handling unit :-  To transport coal from coal storage to power plant. A large quantity of ash about 10 to 30 % produced in furnace, the removal of ash from boiler furnace ... disposed off.  Various methods of disposal of ash:  Mechanical system.  Pneumatic system.

Description : Define admittance and state its unit.

Answer : Admittance is defined as the ability of the circuit to carry (admit) alternating current through it.  OR  It is the reciprocal of impedance Z. i.e Admittance Y = 1/Z.  Unit: Its unit is siemen (S) or mho (Ʊ).

Description : Which unit holds data permanently?  (A) Input unit (B) Secondary storage unit (C) Output Unit (D) Primary Memory Unit

Answer : Which unit holds data permanently?  (A) Input unit (B) Secondary storage unit (C) Output Unit (D) Primary Memory Unit

Description : The unit heat rate characteristic of a thermal power unit shows :  (A) Heat input per kWh of output versus the megawatt output of unit  (B) Heat input per kW of output versus the megawatt output of unit  (C) Heat input per kWh of output versus the megawatt hour output of unit  (D) Heat input per kW of output versus the megawatt hour output of unit

Answer : The unit heat rate characteristic of a thermal power unit shows : Heat input per kWh of output versus the megawatt output of unit 

Description : Which of the following is the SI unit for admittance? A) Ohm B) Henry C) Farad D) Siemens

Answer : Which of the following is the SI unit for admittance? A) Ohm B) Henry C) Farad D) Siemens

Description : Which of the following is an example of SI derived unit? A) Capacitance (Farad) B) Time (second) C) Luminous intensity (Candela) D) All the above

Answer : Which of the following is an example of SI derived unit? A) Capacitance (Farad) B) Time (second) C) Luminous intensity (Candela) D) All the above

Description : Which of the following is a unit of magnetic flux? A) Weber B) Maxwell C) Both A and B D) None of these

Answer : Which of the following is a unit of magnetic flux? A) Weber B) Maxwell C) Both A and B D) None of these

Description : The unit of reluctance is?

Description : The unit of retentivity is?

Answer : The unit of retentivity is weber/sq. m.

Description : The unit of magnetic flux is?

Answer : The unit of magnetic flux is weber.

Description : Joule X second is the unit of?

Answer : Joule X second is the unit of power .

Description : A) Watt B) Volts C) Farad D) Ampere

Answer : Correct answer: D) Ampere

Description :

Options:

A) WATT
B) AMPERE
C) VOLTS
D) OHM

Answer : Correct Answer: A) WATT

Description : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Answer : What does double integration of a unit step function lead to? A) A doublet B) A ramp C) An impulse D) A parabola 

Description : What is the unit of measure for voltage?

Answer : Voltage measured in volts.

Description : Define the following terms related to tariff: (i) Connected load (ii) Unit consumed (iii) Fixed charges (iv) Electricity Tax 

Answer : (i) Connected load  It is the sum of the power ratings (Watts or kW or MW) of all devices and machines existing (installed) in the premises of consumer. It is used to decide the ... a percentage of the total electricity bill which includes all amounts that go to the electricity supply agency. 

Description : Which of the following are components of Central Processing Unit (CPU)?  (A) Arithmetic logic unit, Mouse  (B) Arithmetic logic unit, Control unit  (C) Arithmetic logic unit, Integrated Circuits  (D) Control Unit, Monitor

Answer : Which of the following are components of Central Processing Unit (CPU)?  (A) Arithmetic logic unit, Mouse  (B) Arithmetic logic unit, Control unit  (C) Arithmetic logic unit, Integrated Circuits  (D) Control Unit, Monitor

Description : A control system having unit damping factor will give  (1) Oscillatory response (2) Undamped response (3) Critically damped response (4) No response

Answer : 1

Description : The unit of speed regulation of a governor is :  (A) Hz (B) Hz/MW (C) Hz/MVA (D) rpm/MVAR

Answer : The unit of speed regulation of a governor is : Hz/MW

Description : Unit commitment is a procedure in which :  (A) Scheduling of total generation is done economically  (B) Optimal combination of units in a system is chosen at any given time  (C) Most efficient machines are selected for financial economy  (D) Most efficient machines are selected for minimum reactive power loss

Answer : Unit commitment is a procedure in which : Optimal combination of units in a system is chosen at any given time 

Description : A second order system shows 100% overshoot in its unit step response. It can be categorized as (A) underdamped system. (B) overdamped system. (C) Critically damped system. (D) undamped system.

Answer : A second order system shows 100% overshoot in its unit step response. It can be categorized as undamped system.

Description : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for

Answer : The unit circle of the Nyquist plot transforms into unity or 0 dB line of the amplitude plot of the Bode diagram for all frequencies

Description :

The unit of power in S.I. units is

Answer : The unit of power in S.I. units is watt.

← Prev Question Next Question →
editAsk a Question
...