The capacity to do work is termed as Energy. The Energy expended to do work in unit time istermed as Power. It is represented as P

answered
Jan 17, 2018
by
jatinkhichi

**Description :** What is the formula for calculating reactive power?

**Last Answer :** Reactive Power = (IX)2X

**Description :** What is the formula for calculating true power?

**Last Answer :** True Power = (IR)2R

**Description :** The total power in both series and parallel circuits is computed with the formula: PT = P1 + P2 + P3 +...Pn. Why can this formula be used for both series and parallel circuits?

**Last Answer :** In both cases all the power used in the circuit must come from the source.

**Description :** What is the formula for reactive power?

**Last Answer :** The formula for reactive power is, Reactive power = VI sin (phi) The unit of reactive power is VAR ( Volt ampere reactive). The reactive power is denoted by 'Q'. The formula for real power is, Real power = VI cos (phi) The unit of real power is watts. The real power is denoted by 'P'.

**Description :** Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s. a) 744.8 hp b) 0.998 hp c) 746 hp d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h

**Last Answer :** 0.998 hp

**Description :** What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia? A. 28 hp B.108 hp C.256 hp D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

**Last Answer :** 108 hp

**Description :** hosts per subnet. What subnet mask will you use? * 255.255.255.248 * 255.255.255.128 * 255.255.255.192 * 255.255.255.240

**Last Answer :** Correct answer: A By borrowing 5 bits from the last octet, you can. have 30 subnets. If you borrowed only 4 bits you could only have 14 subnets. The formula is (2 to the power of n)-2. By borrowing ... To get 20 subnets, you would need to borrow 5 bits so the subnet mask would be 255.255.255.248.

**Description :** The following formula is correct: (A) Load factor=Average load for a period/ Peak load for the same period (B) Load factor=Average load for a period x Peak load for the same period (C) Load factor=Average load for a period + Peak load for the same period (D) All of the above

**Last Answer :** Otion A is correct as Load factor is the ratio of average load to the peak load in a given time interval.

**Last Answer :** R=V÷I R= Resistance value(ohm) V=Potential different between two point(volt) I=Current(Amp)

**Description :** What is the formula for resistivity?

**Last Answer :** Resitivity is the property of a material. It is given in ρ . R=ρ L/A is the formula. where , Resitance is directly proportional to Length & Inversely proportional to Area of ... the resistance offered by a conductor to the flow of current is called specific resistance or resistivity.

**Description :** What is the formula for Watts Law?

**Last Answer :** This is the formula for power Watts = Volts2 / Ohms..

**Description :** Acceleration formula

**Description :** Wye and delta conversion formula

**Last Answer :** Wye and delta conversion formula

**Description :** Magnetomotive force formula

**Last Answer :** Magnetomotive force formula

**Description :** Energy stored in electrostatic field of capacitance formula

**Last Answer :** Energy stored in electrostatic field of capacitance formula

**Description :** Capacitive reactance

**Last Answer :** Capacitive reactance formula

**Description :** Capacitive current

**Last Answer :** Capacitive current formula

**Description :** Mason's Gain Formula Problem 2

**Last Answer :** Mason's Gain Formula Problem 2

**Description :** Mason's Gain Formula Problem 1

**Last Answer :** Mason's Gain Formula Problem 1

**Description :** Define efficiency of a transformer. State its formula.

**Last Answer :** the efficiency of a transformer is defined by the ratio of output of the transformer to the input to it. this is denoted by the symbol called eita. Efficiency = output/Input*100%

**Description :** Define magnetic flux density and state its formula.

**Last Answer :** The magnetic flux per unit area is called as magnetic flux density. Magnetic flux density is denoted by B. The formula for magnetic flux density is Weber per metre square or Tesla. Mathematically ... the unit of magnetic flux density is Weber per metre square which is also called as Tesla.

**Description :** The following formula is correct: (A) Diversity factor =1 / Coincidence Factor (B) Diversity factor =1 x Coincidence Factor (C) Diversity factor =1 - Coincidence Factor (D) All of the above

**Last Answer :** The following formula is correct: (A) Diversity factor =1 / Coincidence Factor (B) Diversity factor =1 x Coincidence Factor (C) Diversity factor =1 - Coincidence Factor (D) All of the above