menu search
person
The synchronous speed of an 8 pole induction motor supplied power from a 50 Hz source will be ?
thumb_up_alt 1 like thumb_down_alt 0 dislike
135 views

2 Answers

750 rpm. As Ns = 120f/P

thumb_up_alt 0 like thumb_down_alt 0 dislike
Ns         equals        f/pair pole

50/4      - 12.5
thumb_up_alt 0 like thumb_down_alt 0 dislike
← Prev Question Next Question →

Related questions

Description :

A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because?

Answer :

A synchronous motor has better power factor as compared to that of an equivalent induction motor. This is mainly because stator supply is not required to produce magnetic field.

thumb_up_alt 0 like thumb_down_alt 0 dislike
93 views 1 answer
Description :

Answer :

In case of a reluctance motor, when the load is increased so that it cannot maintain synchronous speed the motor will run as induction motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
95 views 1 answer
Description :

If we change the excitation of synchronous machine will it affect on motor speed?

Answer :

No, If we change the excitation of synchronous machine it will not affect on motor speed.

thumb_up_alt 0 like thumb_down_alt 0 dislike
78 views 1 answer
Description :

Answer :

The operating speed of a synchronous motor can be changed to new fixed value by changing frequency.

thumb_up_alt 0 like thumb_down_alt 0 dislike
92 views 1 answer
Description :

Answer :

Centrifugal switch disconnects the auxiliary winding of the motor at about 70 to 80 percent of synchronous speed.

thumb_up_alt 0 like thumb_down_alt 0 dislike
161 views 1 answer
Description :

Answer :

If the centrifugal switch does not open at 70 to 80 percent of synchronous speed of motor, it would result in damage to the starting winding.

thumb_up_alt 0 like thumb_down_alt 0 dislike
71 views 1 answer
Description :

Synchronous motor always runs at which speed?

Answer :

Synchronous motor always runs at synchronous speed.

thumb_up_alt 0 like thumb_down_alt 0 dislike
71 views 1 answer
Description :

Why the speed of synchronous motor is constant?

thumb_up_alt 1 like thumb_down_alt 0 dislike
62 views 0 answers
Description :

The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque  (1) Decreases (2) Increases (3) Remains constant (4) None of the above

Answer :

The speed of a three-phase induction motor is controlled by variable voltage variable frequency control (i.e. keeping V/f constant). As the frequency is reduced, the slip at maximum torque Increases 

thumb_up_alt 0 like thumb_down_alt 0 dislike
131 views 1 answer
Description :

Answer :

Speed torque characteristic of a repulsion induction motor is similar to that of a D.C. compound motor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
87 views 1 answer
Description :

speed control methods of three phase induction motor?

Answer :

Speed control of three phase induction motor

thumb_up_alt 0 like thumb_down_alt 0 dislike
221 views 2 answers
Description :

Which motor have more efficiency, synchronous motor or induction motor?

Answer :

Synchronous motor has more efficiency.

thumb_up_alt 0 like thumb_down_alt 0 dislike
69 views 1 answer
Description :

The number of poles in a phase induction motor at 50 Hz and running at 1500 rpm will be?

Answer :

The number of poles in a phase induction motor at 50 Hz and running at 1500 rpm will be 4.

thumb_up_alt 0 like thumb_down_alt 0 dislike
80 views 1 answer
Description :

What will happen if the induction motor runs at synchronous speed ?

Answer :

Since there is always slip present in rotor it cannot run at synchronous speed no current will be developed hence no torque will developed

thumb_up_alt 0 like thumb_down_alt 0 dislike
91 views 3 answers
Description :

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

Answer :

What is the slip (as a percentage) when a 6 pole single phase induction motor operating on 220 V and 60 Hz is rotating at speed of 1140 rpm? A) 60% B) 5% C) 10% D) None of these

thumb_up_alt 0 like thumb_down_alt 0 dislike
86 views 1 answer
Description :

An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is (A) 5.06 kW (B) 0.3 kW (C) 100 kW (D) 83.33 kW

Answer :

An 8-pole, 50Hz, three-phase induction motor is running at 705rpm and has a rotor copper loss of 5kW. Its rotor input is 83.33 kW

thumb_up_alt 0 like thumb_down_alt 0 dislike
143 views 1 answer
Description :

Answer :

If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

thumb_up_alt 0 like thumb_down_alt 0 dislike
127 views 1 answer
Description :

what will happen when excitation of an unloaded salient pole synchronous motor suddenly gets disconnected?

Answer :

When excitation of an unloaded salient pole synchronous motor suddenly gets disconnected the motor will stop.

thumb_up_alt 0 like thumb_down_alt 0 dislike
301 views 1 answer
Description :

A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for

Answer :

A 400 V, 50 Hz three-phase induction motor rotates at 1440 rpm on full -load. The motor is wound for 4 poles

thumb_up_alt 0 like thumb_down_alt 0 dislike
158 views 1 answer
Description :

A 3-phase, 4-pole, 50Hz induction motor runs at a speed of 1440 rpm. The rotating field produced by the rotor rotates at a speed of ________ rpm with respect to stator field. (A) 1500 (B) 0 (C) 1440 (D) 60

Answer :

0

thumb_up_alt 0 like thumb_down_alt 0 dislike
944 views 2 answers
Description :

The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and quadrature-axis reactance, 0.5 pu, and input voltage, 1.0 pu is (A) 0.25 pu (B) 0.5 pu (C) 1.0 pu (D) 1.5 pu

Answer :

The maximum reluctance power of a salient-pole synchronous motor having direct-axis reactance, 1.0 pu and quadrature-axis reactance, 0.5 pu, and input voltage, 1.0 pu is 0.5 pu

thumb_up_alt 0 like thumb_down_alt 0 dislike
82 views 1 answer
Description :

If the field of synchronous motor is under excited, power factor will be?

Answer :

If the field of synchronous motor is under excited, power factor will be lagging.

thumb_up_alt 0 like thumb_down_alt 0 dislike
219 views 1 answer
Description :

A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50 Hz source, is rotating at 1440 rpm. The electrical frequency in Hz of the induced negative sequence current in the rotor is  (A) 100 (B) 98 (C) 52 (D) 48

Answer :

A 4-pole induction motor, supplied by a slightly unbalanced three-phase 50 Hz source, is rotating at 1440 rpm. The electrical frequency in Hz of the induced negative sequence current in the rotor is 98 

thumb_up_alt 0 like thumb_down_alt 0 dislike
136 views 1 answer
Description :

In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an external resistance in the rotor circuit and the slip is 0.15. If the rotor winding resistance per phase is 0.2 Ω, the external resistance is (A) 0.2 Ω (B) 0.3 Ω (C) 0.4 Ω (D) 0.5 Ω

Answer :

In a 3-phase slip-ring induction motor, the slip at some speed is 0.05. The speed is reduced by inserting an external resistance in the rotor circuit and the slip is 0.15. If the rotor winding resistance per phase is 0.2 Ω, the external resistance is 0.3 Ω

thumb_up_alt 0 like thumb_down_alt 0 dislike
112 views 1 answer
Description :

If the load of the normally excited synchronous motor is increased the power factor will?

Answer :

If the load of the normally excited synchronous motor is increased the power factor will become lagging.

thumb_up_alt 0 like thumb_down_alt 0 dislike
115 views 1 answer
Description :

The synchronous motor will develop maximum power when the load angle is?

Answer :

The synchronous motor will develop maximum power when the load angle is 900.

thumb_up_alt 0 like thumb_down_alt 0 dislike
93 views 1 answer
Description :

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min (A) 100 rpm (B) 200 rpm (C) 400 rpm (D) 800 rpm

Answer :

The speed of a 2-pole, 3-phase stepper motor operated by 1200 pulses/min 200 rpm

thumb_up_alt 0 like thumb_down_alt 0 dislike
129 views 1 answer
Description :

The synchronous speed for the seventh space harmonic mmf wave of a 3-phase, 8-pole, 50 Hz induction machine is  (A) 107.14 rpm in forward direction (B) 107.14 rpm in reverse direction (C) 5250 rpm in forward direction (D) 5250 rpm in reverse direction

Answer :

The synchronous speed for the seventh space harmonic mmf wave of a 3-phase, 8-pole, 50 Hz induction machine is 107.14 rpm in forward direction 

thumb_up_alt 0 like thumb_down_alt 0 dislike
236 views 1 answer
Description :

With a neat sketch give the working of shaded pole induction motor.

Answer :

Explanation: It has squirrel cage rotor and salient pole stator. The stator poles are shaded partially by short circuited conductor band to create the phase difference between the fluxes emerging from shaded ... rotating magnetic field in the air-gap and torque is exerted on the squirrel cage rotor.

thumb_up_alt 0 like thumb_down_alt 0 dislike
143 views 2 answers
Description :

The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 

Answer :

The slip of 400 V, three phase, 4 -pole induction motor when rotating at 1440 rpm is 4 percent

thumb_up_alt 0 like thumb_down_alt 0 dislike
217 views 1 answer
Description :

A change of 4% in the supply voltage to an induction motor will produce a change of approximately

Answer :

A change of 4% in the supply voltage to an induction motor will produce a change of approximately 8% in the rotor torque

thumb_up_alt 0 like thumb_down_alt 0 dislike
296 views 1 answer
Description :

In an induction motor if the flux density is reduced to one-half, of its normal value then the torque will  (1) reduce to one-half (2) reduce to one-fourth (3) remain unchanged (4) increase four times

Answer :

In an induction motor if the flux density is reduced.to one-half, of its normal value then the torque will reduce to one-fourth

thumb_up_alt 0 like thumb_down_alt 0 dislike
245 views 1 answer
Description :

Answer :

An induction motor has relatively high power factor at near full load.

thumb_up_alt 0 like thumb_down_alt 0 dislike
67 views 1 answer
Description :

The torque developed by any 3-phase induction motor at 0.8 p.u. slip is (A) Full-load torque (B) unstable torque (C) starting torque (D) break down

Answer :

The torque developed by any 3-phase induction motor at 0.8 p.u. slip is unstable torque

thumb_up_alt 0 like thumb_down_alt 0 dislike
2.9k views 1 answer
Description :

Answer :

If the speed of a D.C. shunt motor is increased, the back e.m.f. of the motor will increase.

thumb_up_alt 0 like thumb_down_alt 0 dislike
122 views 1 answer
Description :

Answer :

As the load is increased the speed of D.C. shunt motor will reduce slightly.

thumb_up_alt 0 like thumb_down_alt 0 dislike
116 views 1 answer
Description :

Answer :

The efficiency of a properly designed synchronous motor will usually fall in range 85 to 95%.

thumb_up_alt 0 like thumb_down_alt 0 dislike
62 views 1 answer
Description :

Answer :

In case one phase of a three-phase synchronous motor is short-circuited the motor will not start.

thumb_up_alt 0 like thumb_down_alt 0 dislike
206 views 1 answer
Description :

The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as?

Answer :

The maximum constant load torque under which a synchronous motor will pull into synchronism at rated rotor supply voltage and frequency is known as pull-in torque.

thumb_up_alt 0 like thumb_down_alt 0 dislike
236 views 1 answer
Description :

The maximum torque which a synchronous motor will develop at rest for any angular position of the rotor, at rated stator supply voltage and frequency, is known as?

thumb_up_alt 0 like thumb_down_alt 0 dislike
93 views 0 answers
Description :

A three-phase synchronous motor connected to ac mains is running at full load and unity power factor. lf its shaft load is reduced by half and field current is held constant then its new power factor will be

Answer :

Leading

thumb_up_alt 0 like thumb_down_alt 0 dislike
489 views 2 answers
Description :

Three phase synchronous motor will have how many sliprings?

Answer :

Three phase synchronous motor will have two sliprings.

thumb_up_alt 0 like thumb_down_alt 0 dislike
78 views 1 answer
Description :

The synchronous motor which works on leading power factor and does not drive any mechanical load is called?

Answer :

The synchronous motor which works on leading power factor and does not drive any mechanical load is called synchronous condenser.

thumb_up_alt 0 like thumb_down_alt 0 dislike
82 views 1 answer
Description :

How can we improve power factor using synchronous motor?

thumb_up_alt 0 like thumb_down_alt 0 dislike
66 views 0 answers
Description :

Answer :

Yes, we can make the power factor of synchronous motor leading by adjusting its excitation.

thumb_up_alt 0 like thumb_down_alt 0 dislike
87 views 1 answer
Description :

Why starter is required for starting an induction motor?

thumb_up_alt 0 like thumb_down_alt 0 dislike
102 views 0 answers
Description :

In a self-controlled synchronous motor fed from a variable frequency inverter  (1) the rotor poles invariably have damper windings  (2) there are stability problems  (3) the speed of the rotor decides stator frequency  (4) the frequency of the stator decides the rotor speed

Answer :

In a self-controlled synchronous motor fed from a variable frequency inverter the frequency of the stator decides the rotor speed

thumb_up_alt 0 like thumb_down_alt 0 dislike
422 views 1 answer
Description :

The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

Answer :

The speed of a D.C. motor can be controlled by varying  1. Its flux per pole 2. Resistance of armature circuit 3. Applied voltage 4. All of the above

thumb_up_alt 0 like thumb_down_alt 0 dislike
145 views 1 answer
Description :

Answer :

The speed of a D.C. shunt motor can be increased by increasing the resistance in field circuit.

thumb_up_alt 0 like thumb_down_alt 0 dislike
98 views 1 answer
Description :

Answer :

If starting winding of a single-phase induction motor is left in the circuit, it will draw excessive current and overheat.

thumb_up_alt 0 like thumb_down_alt 0 dislike
205 views 1 answer
editAsk a Question
...