search
person
what is the minimum voltage required to turn on a diode ?

1 Answer

0.7 v sil and 0.3 v for gr


thumb_up_alt 1 like thumb_down_alt 0 dislike

Related questions

Description : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Answer : A zener voltage regulator has load requirements of 12 V and 2 A. The zener diode minimum current requirement is 0.2 A. The minimum voltage at input is 24 V. What is the required value of series resistance with source? A) 5.45 Ω B) 6 Ω C) 7.2 Ω D) 6.38 Ω  

Description : Is gate turn on mechanism of GTO is similar to conventional thyristor?

Answer : Yes gate turn on mechanism of GTO is similar to conventional thyristor.

Description :

Answer : GTO can be turned on by providing positive pulse to the gate terminal and it can be turn off by providing negative pulse to gate terminal.

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

Description : Minimum voltage regulation occurs when the power factor of the load is?

Answer : Minimum voltage regulation occurs when the power factor of the load is leading.

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

Description :

Answer : Yes, Zener diode is a voltage regulator. Zener diode maintain constant reverse Biased Voltage. If the current is varying then also zener diode maintain constant voltage.

Description : Explain the need and steps to conduct the reduced voltage running up test on the three phase induction motor.

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Description : Explain the principle of ON-OFF control and phase control of AC voltage controller with suitable circuit and waveforms.

Answer : The integral cycle control (on-off control) and phase angle control are the two types of AC voltage controller. The principle of ON-OFF control: The on-off control is also called an integral cycle ... control. In phase control, the switch is on for some period of each cycle.  

Description : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :  (A) less than 66 kV (B) lie between 66 kV and 110 kV (C) more than 165 kV (D) lie between 110 kV and 165 kV

Answer : A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are : lie between 66 kV and 110 kV

Description :

Answer : No we cannot turn off normal thyristor using Gate.

Description : The minimum charge on an ion is?

Answer : The minimum charge on an ion is equal to the charge of an electron.

Description : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be -

Answer : In an R-C phase shift oscillator, the minimum no. of R-C networks to be connected in cascade will be 3

Description : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Answer : The clock frequency of an 8085 microprocessor based system is 3 MHz. What should be the minimum pulse width of the INTR signal so that it is recognized successfully? A) 5.6 µs B) 5.7 µs C) 5.8 µs D) 5.9 µs

Description : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when

Answer : For optimum generator scheduling for different power plants, the minimum fuel cost is obtained when The incremental fuel cost of each plant multiplied by the penalty factor is the same

Description : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Answer : Which of the following circuit breakers has high reliability & minimum maintenance?  (A) Bulk oil type CB (B) Air blast CB (C) Vacuum CB (D) Sulphur hexafluoride CB 

Description : The Minimum Oil Circuit Breaker (MOCB) is named because of :  (A) Reduced requirement of oil (B) Reduced requirement of air (C) All of the above (D) None of the above

Answer : The Minimum Oil Circuit Breaker (MOCB) is named because of : Reduced requirement of oil 

Description : ln a minimum oil circuit breaker the oil is used

Answer : ln a minimum oil circuit breaker the oil is used to act as circuit breaking medium only

Description :

Build using minimum number of CMOS gates.

  1. Three input NAND gate.
  2. Two input NOR gate
  3. Three input NOR gate
  4. Two input AND gate
  5. Two input OR gate

Answer : Three input NAND gate. Two input NOR gate Three input NOR gate Two input AND gate Two input OR gate

Description :

Write short notes on diode.

Answer : Diode is made from semiconductor material like silicon or germanium. Diode may use as rectifier which convert AC to DC. It is a electronic component. It is two terminal device, one is anode and second is ... in one direction. Diode is made from P-type and N-type material. Diode have a PN junction.

Description : How much time a diode takes to switch ON in forward bias condition.

Answer : t=0 sec.

Description : what is diode ?

Answer : Semiconductor device. That allows flow of current in one direction

Description : What would cause a diode to fail?

Answer : Supply voltage beyond its limit

Description : Diode VI characteristics

Answer : Diode VI characteristics

Description : applications of Schottky diode.

Answer : 1) To rectify very high frequency signals. 2) As a switching device in digital computers. 3) In clipping & and clamping circuits. 4) In low power schottky TTL circuits. 5) In mixing and detecting circuits used in communication systems. 6) In low voltage power supply circuits.

Description :  applications of P-N junction diode

Answer : 1.It is used as rectifier in DC power supply 2.It is used as free wheel diode across relay or inductive load 3.It is used as switch in logic circuits used in computers 4.It is used as detector in demodulation circuits of communication receiver 

Description : State any two applications of zener diode.

Answer : Applications of Zener Diode: i) As a voltage regulator. ii) As a fixed reference voltage provider in transistor biasing circuits. iii) As peak clippers or limiters in wave shaping circuits.

Description : List specification of zener diode

Answer : 1. Zener Voltage 2. Maximum Zener current 3. Power dissipation 4. Operating temperature 5. Dynamic Resistance 

Description : Define ripple factor and PIV of diode.

Answer : 1. Ripple factor: It is define as ratio of R.M.S. value of AC component to the DC component in the output.  2. PIV : It is maximum reverse voltage that diode can withstand without destroying junction.

Description : Explain the operating principle of LASER and list applications of LASER diode.

Answer : A basic construction of Laser diode is as shown . A PN junction is formed by two layers of doped gallium arsenide. There is highly reflective surface at one end of PN junction and ... 6. laser scanning and light beam illumination. 7. Military applications 8. Medical surgery 9.Diamond cutting

Description : What is a diode clamper circuit?

Answer : Tha faction of diode 

Description :

What is the use of diode in the circuit?

Answer : Diode is a device which allows the flow of current in one direction and blocks the current in opposite direction.

Description : What is the use of Schottky diode?

Answer : Schottky diode are use in SMPS, Sample and hold circuits and voltage clamping etc.

Description : What is the use of laser diode?

Answer : laser diodes are use in telecommunication, rangefinders, barcode readers etc.

Description : What does a Shockley diode do?

Answer : It is diode have low forward voltage drop and very high switching action

Description : What is the use of fast recovery diode?

Answer : Fast recovery diode are used in high frequency rectification. Fast recovery diode also used for freewheeling. Fast recovery diode also used for DC to DC converter.

Description : What is the use of Tunnel diode ?

Answer : Tunnel diode is use in frequency converters and detectors, ultra high speed switching, amplifiers, etc.

Description :

Answer : In Reverse bias of diode when the cathode is connected to positive and anode is connected to negative very small current flows this very small current is known as leakage current of diode.

Description :

Answer : It is semiconductor diode with a low forward voltage drop and very high switching action

Description : Suggest the diode material suitable to rectify 0.5V AC signal.

Answer : The diode material suitable to rectify 0.5V AC signal is silicon

Description :

While studying the V-I characteristics of a zener diode, there are two different values of resistors connected in series with it. In case of the forward characteristics, a ~70 ohm resistor is connected whereas in case of reverse characteristics, a fairly large ~510 ohm resistor. What is the reason behind it ? Is the difference really necessary ?image

Description : Draw symbols of zener diode and LED.

Answer : Symbol of zener diode : Symbol of LED

Description :

Diode


Description : Write the function of freewheeling diode.

Answer : Function of Freewheeling Diode (FWD): a) Freewheeling diode is used across inductive loads such as coils, dc motor armature etc. to prevent voltage spikes across these loads when the switching ... current is shifted from switching device, it is turned off easily and regain its blocking ability.

Description : Avalanche diode

Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Description : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

Answer : Which diode exhibits negative resistance characteristic? (A) LED (B) Zener (C) Tunnel diode (D) PN diode

← Prev Question Next Question →
editAsk a Question
...