search
person
What is the threshold voltage?

1 Answer

440

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V

Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

Description : What is terminal voltage ?

Description : What kills, current or voltage?

Answer : Current would kill. You can actually have thousands of bolts going through you and not even know it. Yes you probably know already voltage is current times resistance. Since your body is a resistor it would take just a small amount of current to create a very high voltage

Description : What is internal voltage drop and terminal voltage?

Answer : It is not permissible to just connect the positive terminal to the negative terminal of a cell with a copper wire. It will overheat and get damaged. This happens because the electromotive force (emf) ... than the nominal voltage (emf) of the cell and this lower voltage is called terminal voltage.

Description : What is line voltage and phase voltage? Draw balanced three phase star connected system. Show all the voltages and currents.

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Description : What is a capacitor voltage transformer? A) It is a transformer used in power systems to step up low voltage signals and provide extra high voltage B) It is a transformer used in power systems to step up high voltage signals and provide extra high voltage C) It is a transformer used in power systems to step down extra high voltage signals and provide low voltage D) None of these

Answer : What is a capacitor voltage transformer? A) It is a transformer used in power systems to step up low voltage signals and provide extra high voltage B) It is a transformer used in power systems ... power systems to step down extra high voltage signals and provide low voltage D) None of these

Description : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Answer : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description :

What is meant by pinch off voltage in MOSFET?

Description : What is meant by extra high voltage transmission?

Answer : HT & LT  two types transmission in industrial line 

Description : What is the unit of measure for voltage?

Answer : Voltage measured in volts.

Description :

What equipment is used to measure voltage?

Answer : Voltmeter is used to measure voltage.

Description : What is an analog voltage?

Description :

What is meant by flash over voltage?

Description : What is dielectric withstand voltage?

Description : What is the definition of extra low voltage?

Answer : Extra-low voltage (ELV) is an electricity supply voltage in a range which carries a low risk of dangerous electrical shock.

Description : What is the difference between line and phase voltage?

Answer : Line voltage  is  voltage  between two  phases R &Y  (415 v)  while  phase  voltage  is  the  voltage  between  one  phase and  a neutral  B &  N   (240 v).

Description :

What is impulse voltage of transformer?

Description : What is Extra High Voltage?

Description : What is the difference between a line voltage and low voltage control system?

Description : What are the advantages of high voltage transmission?

Answer : Advantages:  1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases ... line increases  12. As transmission voltage increases power handling capacity of transmission line increases 

Description : What is a high voltage test?

Description : What is considered low voltage and high voltage?

Description : What is the cause of voltage fluctuation?

Description : What can cause a voltage spike?

Description : What is voltage interruption?

Description : What is meant by a voltage surge?

Description :

What is voltage sags and swells?

Description : what is the minimum voltage required to turn on a diode ?

Answer : 0.7 v sil and 0.3 v for gr

Description : What is the voltage in 3 phase line?

Answer : between 430 to 440 v

Description : What is the ripple voltage?

Answer : Ripple voltage is the small variations in Dc voltage that remain after filtering in a power supply.

Description : What is the voltage of a red LED?

Answer : A red led requires 2v to light. LEDs requires different amounts of voltage ranging between 1.8 and 3.3 depending on the intensity and color of the Led.

Description : If resistance is 8 Ohm and current is 16 ampere then what will be the voltage and power?

Answer : 128 volts ,2048 watts

Description :

Answer : Unit of voltage is volt denoted by capital V .

Description : what is ideal voltage source?

Answer : every voltage source have their own resistance that is called as internal resistance it is because of the resistance of electrodes and electrolytes in the battery interms of other supplyit have ... in universe it means ideal voltage source is this voltage source having internal resistance zero

Description : What is Voltage Source Inverter (VSI) ?

Answer : Voltage Source Inverter (VSI)  Inverter is device which converts Direct Current (DC) to Alternating Current (AC). There are two types of inverters one is Voltage source inverter ... VSI consist of two load terminals and three phase VSI consist of three load terminals.

Description : what is voltage?

Answer : Voltage is an electromotive force or potential difference expressed in volts

Description : How to buy a voltage stabilizer correctly?

Answer : How to buy a voltage stabilizer correctly? By the type of networks, stabilizers can be divided into single-phase, designed for a voltage of 220V and three-phase, which are designed for 380V. ... , they must be easy to operate, have a convenient appearance, and not create noise during operation.

Description : List standard voltage level used in India. 

Answer : Standard voltage level used in India: * Generation Voltage : 3.3KV, 6.6KV,11KV and 17.5 KV,21KV (Now a days generation voltage is in the range of 11KV- 33KV) * Primary Transmission voltage :- 220 ... voltages in India are 765 KV (750KV), 400KV, 220KV, 132KV, 110KV, 66KV, 33KV, 22KV, 11KV.

Description : State the advantages of use of high voltage in transmission of Electric power. 

Answer : Advantages: 1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases, its ... high voltage transmission line, successful interconnection of transmission line is possible than low voltage. 

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : With the help of N-channel JFET describe the effect of input voltage VGS on output current ID.

Answer : Working of N channel FET: * When a voltage is applied between the drain and source with a DC supply (VDD), the electrons flows from source to drain through narrow channel ... where the channel gets completely blocked and the drain current becomes zero is called pinch- off voltage. 

Description : Define: i) Input Offset Voltage ii) Input offset Current iii) Input Bias Current iv) Output offset voltage

Answer : Definition of parameters of OPAMP is follows:  i) Input Offset Voltage: Input offset voltage is defined as the voltage that must be applied between the two input terminals of an OPAMP to null or ... to ground) and output voltage is obtained non zero such voltage is output offset voltage of opamp.

Description :

Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Answer : Nodal Analysis with Voltage Sources dependent voltage source and two supernode

Description :

Nodal analysis example with voltage source and supernode

Answer : Nodal analysis example with voltage source and supernode

Description : Explain the need and steps to conduct the reduced voltage running up test on the three phase induction motor.

Description : Nodal Analysis with Voltage Sources

Answer : Nodal Analysis with Voltage Sources

Description : Voltage Division

Answer : Voltage Division

← Prev Question Next Question →
editAsk a Question
...