search
person
What is the voltage of a red LED?

4 Answers

3V (it  can be powered by two AA or AAA batteries )
thumb_up_alt 3 like thumb_down_alt 0 dislike

the voltage  of red LED is 2v

thumb_up_alt 0 like thumb_down_alt 0 dislike

1.5 v

thumb_up_alt 0 like thumb_down_alt 0 dislike

A red led requires 2v to light. LEDs requires different amounts of voltage ranging between 1.8 and 3.3 depending on the intensity and color of the Led.

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : How do you know the voltage of an LED?

Answer : After connecting led to a DC source we can measure the voltage of led by connecting a voltmeter across it.  But voltage rating of the led is given by the manufacturers. Or we can ... in the market For more doubts connect with me in linkdin [email protected] 

Description : Analyze the effect of supply voltage on performance of LED as regards current, Lumen output, efficacy and life. 

Answer : 1) Effect on Current:- In LED current depends upon supply voltage, if voltage get changes then current also change but this change in current will be control by resistors which are connected in series.  2) ...   4) Effect on Life:- If supply voltage is not stable then life of LED get reduced. 

Description : What are the advantages of LED lamps?

Answer : What are the advantages of LED lamps? LED lamps have an advantage over fluorescent lamps in the first place in terms of environmental friendliness. Another reason for using LED lamps is ... advantages. Today, such lamps are used in everyday life, for industrial lighting and street lighting.

Description : Why the Led Glow in Dc Supply ? Whenever give the Ac Supply What is Affect in Led ?

Answer : LEDs consume DC current to produce light; with AC current the LED will only be lit when current flow is in the proper direction. AC applied to an LED will cause it to blink on and off, and at high frequency the LED will appear to be lit continuously.

Description : Advantages of LED over CFL.

Answer : Advantages of LED over CFL. 1) Efficiency: LED bulbs use close to a third of the amount of power CFL bulbs would use to produce the same amount of light. This makes them ... decorative to heavy duty industrial applications.  6) Maintenance: Smooth light and low maintenance compared to CFL

Description : Draw symbols of zener diode and LED.

Answer : Symbol of zener diode : Symbol of LED

Description :  Compare the salient features of LED and CFL based on: i] Lamp Efficiency ii] Life span 

Answer : Parameter LED CFL Lamp Efficiency  High (more than 70 lumen per watt) Comparatively less (50-60 lumen per watt) Life span (in working hours) 10000 3000

Description : Describe working principle of LED with diagram.

Answer : Constructional Diagram: * Light Emitting Diode (LED) works only in forward bias condition. When Light Emitting Diode (LED) is forward biased, the free electrons from ... gallium arsenide and gallium phosphide the emitted photons have sufficient energy to produce intense visible light.

Description : Draw the symbol of LED & photodiode. 

Answer : Symbol of LED & photodiode

Description : Draw symbol of LED and explain it’s working principle.

Answer : Construction of LED: The basic structure of LED is shown in fig.(a). The active region exists between the p and n regions. The light emerges from the active side in all the directions when electron hole-pairs ... fig.(c). In this way an LED emits light. This is the principle of operation of LED.

Description : List four applications of LED.

Answer : Applications of LED 1.As a power supply status indicator in electronics instruments 2.In traffic light Indicators. 3.In data displaying boards. 4.In medical applications and toys 5.In optical fiber communications 6.Remote controls

Description : Why do dimmable LED lights flicker?

Description : What is the ripple voltage?

Answer : Ripple voltage is the small variations in Dc voltage that remain after filtering in a power supply.

Description : What is Voltage Source Inverter (VSI) ?

Answer : Voltage Source Inverter (VSI)  Inverter is device which converts Direct Current (DC) to Alternating Current (AC). There are two types of inverters one is Voltage source inverter ... VSI consist of two load terminals and three phase VSI consist of three load terminals.

Description : The SCR would be turned OFF by voltage reversal of applied anode-cathode ac supply frequency of A) 10 kHz B) 10 Hz C) 5 kHz D) 5 Hz 

Description : The voltage gains of the amplifier with and without feedback are 20 and 100 respectively. The percentage of negative feedback would be

Answer : The voltage gains of the amplifier with and without feedback are 20 and 100 respectively. The percentage of negative feedback would be 4%

Description : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is  (1) 141 (2) 92.3 (3) 9.23 (4) 1.41

Answer : An amplifier has a voltage gain of 120. To reduce distortion, 10% negative feedback is employed. The gain of the amplifier with feedback is 9.23

Description : The voltage gain of a common -source JFET amplifier depends up on its  (1) Input impedance (2) Amplification factor (3) Dynamic drain resistance (4) Drain load resistance

Answer : 2

Description :

A dc chopper is fed from a constant voltage mains the duty ratio of chopper is progressively increased while the chopper feeds an RL load. The per unit current ripple would 

(1) increase progressively 

(2) decrease progressively 

(3) decrease to a minimum value at α = 0.5 and then increase 

(4) increase to a maximum value at α = 0.5 and then decrease

Answer : A dc chopper is fed from a constant voltage mains the duty ratio of chopper is progressively increased while the chopper feeds an RL load. The per unit current ripple would increase to a maximum value at α = 0.5 and then decrease

Description : A voltage source inverter will have better performance if its  (1) load inductance is small and source inductance is large.  (2) both load and source inductance are small.  (3) both load and source inductances are large.  (4) load inductance is large and source inductance is small. 

Answer : A voltage source inverter will have better performance if its load inductance is large and source inductance is small. 

Description : A voltage source inverter is normally employed when  (1) source inductance is large and load inductance is small (2) source inductance is small and load inductance is large (3) both source and load inductance are small (4) both source and load inductance are large

Answer : 3

Description : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of (A) 1.5V (B) 2.5V (C) 3.5V (D) 4.5V

Answer : The threshold voltage of an n- channel enhancement mode MOSFET is 0.5V when the device is biased at a gate voltage of 3V. Pinch off would be occurs at a drain voltage of 2.5V

Description : Explain the pulse width modulation technique for control of AC output voltage.

Description : Explain the principle of ON-OFF control and phase control of AC voltage controller with suitable circuit and waveforms.

Answer : The integral cycle control (on-off control) and phase angle control are the two types of AC voltage controller. The principle of ON-OFF control: The on-off control is also called an integral cycle ... control. In phase control, the switch is on for some period of each cycle.  

Description : Justify. Power MOSFET is operated at high enough gate source voltage to minimize the conduction losses. 

Answer : MOSFET is metal oxide field effect transistor. MOSFET is a voltage controlled device. MOSFET is majority carrier device. MOSFET are of two one is n-channel MOSFET and p-channel MOSFET. Gate, ... . Hence, power MOSFET is operated at high enough gate-source voltage to minimize the conduction losses.

Description :

Answer : Yes, Zener diode is a voltage regulator. Zener diode maintain constant reverse Biased Voltage. If the current is varying then also zener diode maintain constant voltage.

Description :

Answer : already answered here is mosfet current controlled device?

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

Description : What is terminal voltage ?

Description : What kills, current or voltage?

Answer : Current would kill. You can actually have thousands of bolts going through you and not even know it. Yes you probably know already voltage is current times resistance. Since your body is a resistor it would take just a small amount of current to create a very high voltage

Description : What is internal voltage drop and terminal voltage?

Answer : It is not permissible to just connect the positive terminal to the negative terminal of a cell with a copper wire. It will overheat and get damaged. This happens because the electromotive force (emf) ... than the nominal voltage (emf) of the cell and this lower voltage is called terminal voltage.

Description : What is line voltage and phase voltage? Draw balanced three phase star connected system. Show all the voltages and currents.

Description : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Answer : An SSB transmitter produces a peak-to-peak voltage of 200 V across a 100 Ω antenna load. What is the Peak Envelope Power? A) 49.98 W B) 79.98 W C) 99.96 W D) 199.93 W

Description : What is a capacitor voltage transformer? A) It is a transformer used in power systems to step up low voltage signals and provide extra high voltage B) It is a transformer used in power systems to step up high voltage signals and provide extra high voltage C) It is a transformer used in power systems to step down extra high voltage signals and provide low voltage D) None of these

Answer : What is a capacitor voltage transformer? A) It is a transformer used in power systems to step up low voltage signals and provide extra high voltage B) It is a transformer used in power systems ... power systems to step down extra high voltage signals and provide low voltage D) None of these

Description : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Answer : What happens to the voltage in the secondary when the frequency of the supply in the primary is decreased? A) It increases B) It decreases C) It remains the same D) Cannot say unless the actual percentage increase in the frequency is known

Description : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Answer : Consider a circuit with four resistors in series connected to a voltage source. What happens to the voltage across each resistor, if the value of each of the resistors is doubled? A) It will double B) It will remain the same C) It will be halved D) It will become zero

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Description :

What is meant by pinch off voltage in MOSFET?

Description : What is meant by extra high voltage transmission?

Answer : HT & LT  two types transmission in industrial line 

Description : What is the unit of measure for voltage?

Answer : Voltage measured in volts.

Description :

What equipment is used to measure voltage?

Answer : Voltmeter is used to measure voltage.

Description : What is an analog voltage?

Description :

What is meant by flash over voltage?

Description : What is dielectric withstand voltage?

Description : What is the definition of extra low voltage?

Answer : Extra-low voltage (ELV) is an electricity supply voltage in a range which carries a low risk of dangerous electrical shock.

Description : What is the difference between line and phase voltage?

Answer : Line voltage  is  voltage  between two  phases R &Y  (415 v)  while  phase  voltage  is  the  voltage  between  one  phase and  a neutral  B &  N   (240 v).

Description :

What is impulse voltage of transformer?

Description : What is Extra High Voltage?

Description : What is the difference between a line voltage and low voltage control system?

Description : What are the advantages of high voltage transmission?

Answer : Advantages:  1. As Transmission voltage increases, current decreases. 2. As current decreases, cross section of conductor decreases. 3. As cross section of conductor decreases ... line increases  12. As transmission voltage increases power handling capacity of transmission line increases 

← Prev Question Next Question →
editAsk a Question
...