search
person
Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

2 Answers

Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

Advantages of Permanent Magnet Brushless DC Motor (PMBLDC):-

•No direct contact of stator with rotor hence losses are less, speed is smooth, high speed, less noise and more efficiency.

•Hall effect sensor is use for detecting position of rotor so it gives precise control over rotor control.

•Pulse Width Modulation (PWM) technique is use so harmonics are less and torque generate is more.

•PMBLDC motor is control via solid state devices and microcontrollers so very less power is wasted.

•Gives high speed in smaller size.

•Heat produce is less and bearing stress is less because there is no winding on rotor.

Disadvantages of Permanent Magnet Brushless DC Motor (PMBLDC):-

•It require complicated hardware and software.

•Cost of PMBLDC motor is high.

•If the surrounding of PMBLDC motor is magnetic then it will affect the stator field and cause errors and decrease in speed.
thumb_up_alt 0 like thumb_down_alt 0 dislike

Advantages and Disadvantages of Permanent Magnet Brushless DC (PMBLDC) Motor

image

image

image

thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : The armature resistance of a permanent magnet dc motor is 0.8 Ohm. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 ... .5 A from the same source will be  (A) 48.0% (B) 57.1% (C) 59.2% (D) 88.8%

Answer : The armature resistance of a permanent magnet dc motor is 0.8 Ohm. At no load, the motor draws 1.5 A from a supply voltage of 25 V and runs at 1500 rpm. The efficiency of the motor while it is operating on load at 1500 rpm drawing a current of 3.5 A from the same source will be 48.0%

Description : What is Brushless DC Motor (BLDC) ?

Answer : Brushless DC Motor (BLDC)  The motor is made up of rotor and stator . In BLDC motor the rotor is a ferromagnetic material (permanent magnet). The rotor may be  ... winding gives low torque at low speed and start winding gives high torque at low speed.

Description : State any two applications of brushless DC motor. 

Answer : 1) Synthetic fibre drawing works.  2) Turn table drives in record players.  3) Spindle drives in hard disk circuits.  4) Computer peripheral equipments as plotters etc. 5) Gyroscope motors.  6) Biomedical machines as heart pumps. 

Description : With the help of necessary sketch, explain in brief the working of brushless DC motor. 

Answer : Constructional Diagram of Brushless DC Motor: Working of brushless DC motor: The brushless DC motor is the combination of a permanent excited synchronous motor and a frequency ... Suitable PWM techniques allow regenerative breaking, which increases dynamic and efficiency of the drive. 

Description : A permanent magnet stepper motor with 8 poles in stator and 6 poles in rotor will have a step angle of (a) 7.5° (b) 15° (c) 30° (d) 60°

Answer : d

Description : The following motor definitely has a permanent magnet rotor  (A) DC commutator motor (B) Brushless dc motor (C) Stepper motor (D) Reluctance motor

Answer : The following motor definitely has a permanent magnet rotor Stepper motor

Description : List any four advantages and two disadvantages of 3 phase induction motor.

Answer : Advantages of 3 phase induction motor: 1) Simple in construction. 2) Economical in cost. 3) Requires very less maintenance. 4) High efficiency. 5) Low maintenace cost. 6) Self starting. 7 ... operated below its full load capacity. 6) It takes a large current from line at instant of starting.

Description : List out advantages and disadvantages of bridge rectifier.

Answer : Advantages :  1. Bridge rectifier can be used in applications allowing floating output terminals i.e. not output terminal is grounded.  2. The need of center-tapped transformer is eliminated.  ... The value of the diodes used should be precise , else there will be an error in rectification

Description : (i) Explain the working principle of Electrostatic and permanent magnet speaker. (ii) Compare Woofer and Tweeter.

Answer : (i) Electrostatic speaker. The voltage is applied to the central or movable plate, the signal voltage is applied to the two outside plates causes these plates to attract or repel each other. ... to minimize the impact of this resonant frequency. (ii) Compare Woofer and Tweeter.

Description : Compare variable reluctance and permanent magnet motors.

Answer : Variable reluctance Motor  Permanent magnet motors   The rotor is not magnetised The rotor is magnetised  High torque to inertia ratio  Low torque to inertia ratio  ... rotor has salient pole construction The rotor has mostly smooth cylindrical type of construction. 

Description : What is permanent magnet and electromagnet?

Answer : Permanent magnet: A permanent magnet is an object made from a material that is magnetized and creates its own persistent magnetic field. As the name suggests, a permanent magnet is 'permanent'. ... an electric current passes through the coil. If the current is interrupted, the magnetism is lost.

Description : Two voltmeters of same range, one moving iron type and other permanent magnet moving coil type, are connected in parallel for measuring a.c. supply voltage. If the reading of MI type is 300V, the reading of PMMC type will be (a) zero (b) higher-than M.I. type (c) lower than M.I. type (d) same

Description : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is:

Answer : A permanent magnet moving coil ammeter has a coil resistance of 99 ohm and Full Scale Deflection (FSD) current of 0.1mA. Shunt resistance is 1 ohm. Current through the meter at 0.5 F.S.D is: 0.05mA

Description : The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Answer : ANSWER: Y -- FERROMAGNETIC

Description : Permanent Magnet Moving Coil (PMMC) Instrument

Answer : Permanent Magnet Moving Coil (PMMC) Instrument

Description : A permanent magnet moving coil instrument gives full scale deflection of 25mA when a voltage of 75mV is applied across it. Calculate: (i) Resistance of shunt required for full scale deflection of 150 A. (ii) Series resistance for full scale deflection of 500 V.

Answer : Answer :

Description : Name the material used for :- (i) Moving coil (ii) Permanent magnet in PMMC instrument.

Answer : (i) Material used for Moving coil: Copper, Aluminum( some times)  (ii) Permanent magnets are made of special alloys such as :  Aluminum-Nickel-Cobalt (Alnicos)  Strontium-Iron  Neodymium-Iron-Boron  Samarium-Cobalt.

Description : Write one application of each: i) Permanent Magnet ii) Electromagnet 

Answer : i) Applications of Permanent Magnet: 1) Field of DC motors 2) Tacho-generators 3) In stepper motors. 4) Field of two wheeler and car dynamo 5) In magnetic therapy 6) ... Motors, Generators, Transformers, Electromagnetic Relays, Circuit breakers, Traction, Measuring instruments, Electrical Bell etc.

Description : Permanent magnet moving coil instruments are used for

Answer : PMME are mostly used for measuring voltage and current.

Description : A neodymium magnet is a permanent magnet made from an alloy of _________ A) Neodymium and iron B) Neodymium, iron and iodine C) Neodymium and boron D) Neodymium, iron and boron

Answer : A neodymium magnet is a permanent magnet made from an alloy of Neodymium, iron and boron

Description : The main purpose of permanent magnet motors are (A) to avoid the need for field supply (B) to provide high flux density (C) to provide control over flux level (D) to facilitate kW rating

Answer : The main purpose of permanent magnet motors are to avoid the need for field supply

Description :  The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

Answer :  The main sources of Errors in Permanent Magnet moving Coil (PMMC) are due to : - a) weaking of the permanent magnet due to aging at temperature effects b) weaking of spring due to aging and temperature effects c) change of resistance of the moving coil with temperature d) all the above

Answer : A permanent magnet attracts some substances and repels others.

Description : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields

Answer : The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields a soft iron shielding is used.

Answer : Preferred material for permanent magnet is: Alnico

Answer : A moving-coil permanent-magnet instrument can be used as flux-meter by eliminating the control springs.

Answer : A moving-coil permanent-magnet instrument can be used as ammeter by using a low resistance shunt.

Description : What are the advantages of DC series motor?

Description : What are the advantages and disadvantages of being your height?

Description : State the advantages and disadvantages of pre-cast concrete.

Answer : Advantages of precast concrete products: 1. The concrete of superior quality is produced by strict quality control. 2. It is not necessary to provide joints in the pre-cast construction ... during transport. 2. It becomes difficult to produce satisfactory connections between the pre-cast members

Description : Explain the shielded metal arc welding (SMAW) processes with neat sketch. State its two advantages and disadvantages.

Answer : Working  : Shielded metal arc welding uses a metallic consumable electrode of a proper composition for generating arc between itself and the parent work piece. The molten electrode metal fills the weld ... . 2. Weld may contain slag inclusions 3. Fumes make difficult the process control.

Description : Draw block diagram of successive approximation digital voltmeter. State its two advantages and two disadvantages

Answer : Block diagram Or Advantages: o It is economical method of analog to digital conversion. o The resolution is up to 5 important digits are obtained. Disadvantages: o ... depends on which type of switches are used. o The conversion time required for digital to analog converter.

Description : What are the advantages and disadvantages of MDF wall panels?

Answer : Builders do not need to explain what MDF is. But to a person far from the intricacies of carpentry, decorative and finishing works and furniture production, it may seem that something mysterious ... the owner is a master, and everyone must decide this independently, based on their own preferences.

Description : What are the advantages and disadvantages of a modern candy bar?

Answer : What are the advantages and disadvantages of a modern candy bar? A monoblock is a computer in which a monitor and a system unit are combined in one case. Outwardly, it looks like ... modern monoblocks are equipped with a touchscreen, usually devices designed for home use have such functionality.

Description : State four advantages and four disadvantages of plane table survey

Answer : Advantages: 1. A field book is not required. 2. Errors of booking in field book avoided. 3. Errors of plotting can be readily checked. 4. Suitable in magnetic area. 5. Survey work with ... cannot be done in rainy season. 5. Difficult to re-plot as field notes are not available.

Description : Give advantages and disadvantages of LPG as a fuel for automobile engines.

Answer : Advantages of LPG 1. It is cheaper than petrol 2. It is highly detonation resistant and does not pre-ignite easily. 3. It gives better manifold distribution and mixes easily with air. 4. Residue ... 13. It is safe only if proper periodic maintenance of the gas system is done by trained person. 

Description : State the advantages and disadvantages of series inductor and shunt capacitor filter.

Answer : Advantages of series inductor filter 1. It has low ripple factor at heavy load currents (i.e. low load resistance) 2. It has no surge current through the diode. 3. It reduces the ripple in the DC ... . 3. It has low output voltages for heavy loads. 4. Ripple factor is dependent on the load.

Description : State the advantages and disadvantages of combined operations. 

Answer : combined operation:- if the number of operations are combined in one setting it is possible to reduce the production time and the operations can be performed with more accuracy. Advantages of ... More costly set up 3) Trained operators are necessary 4) Sometimes special machines are needed 

Description : State advantages and disadvantages of ERP System. 

Answer : Advantages of ERP System: [1] Improved efficiency across business due to timely availability of information. [2] Better decision making owing to information integration. [3] Reduced inventory costs due ... [9] Lack of support from the ERP vendor, consultancy firm or the hardware vendor.

Description : What are actuators? Explain Mechanical and Hydraulic actuators type with advantages and disadvantages.

Answer : Actuators:- An actuator is a component of a machine that is responsible for moving or controlling a mechanism or system. Mechanical Actuator:- A mechanical actuator functions to ... the control of the system due to the transmission lines and oil viscosity changes from temperature

Description : List the different actuators. Explain any two types of actuators with advantages and disadvantages

Answer : Actuators [1] Hydraulic Actuator [2] Electrical Actuator [3] Pneumatic Actuator [4] Mechanical Actuator Hydraulic Actuator According to Pascal, when there is an increase in ... efficiency Disadvantages [1] Requires more power [2] Possibilities of fire hazards / accidents

Description : Explain the GANTT chart used in PPC. Enlist advantages and disadvantages of it

Answer : Gantt chart used in production planning and control. Gantt Chart is a project planning tool that can be used to represent the timing of tasks required to complete a project. Because Gantt chats ... time to maintain. 4. Lack of adequate depiction interrelationship between the separate tasks.

Description : List advantages and disadvantages of Lean manufacturing. 

Answer : Advantages 1. Increased overall productivity. 2. Reduced amount of floor space required. 3. Reduced manufacturing lead time. 4. Improved flexibility to react to changes. 5. Improved quality. ... processes to implement lean principle. 2. Long term commitment required. 3. Very risky process.

Description : Enlist the advantages and disadvantages of total station

Answer : Advantages of Total station - 1) Great speed of the work 2) Better accuracy in the measurements 3) Low power consumptions 4) Less time required for work. 5) Less man power required ... Total station - 1) Its high initial cost 2) There are no effective checks over its measurements.

Description : State the advantages and disadvantages of Bourdon type pressure gauge.

Answer : Bourdon tube: Advantages: 1) Low cost 2) Simple construction 3) Wide pressure range 4) High accuracy in relation with low cost Disadvantages: 1) Low spring gradient 2) Susceptible to shock and vibration 3) Susceptible to hysteresis

Description : Write any two advantages and disadvantages of NIS. (Network Information Service)

Answer : Advantages: 1. Allows multiple computers to use the same files, so everyone on the network can access the same data 2. Reduces storage costs by having computers share applications instead of ... the network in clear text and can be easily captured and cracked, making client systems vulnerable.

Description : State any two advantages and disadvantages of digital communication system.

Answer : Advantages of digital communication Digital signals are better suited than analog signals for procession and combining using technique called multiplexing. Digital transmission systems are ... transmission requires precise time synchronization between the clocks in the transmitter and receiver.

Description : State the advantages and disadvantages of digital communication system.

Answer : Advantages of Digital Communication :  1. High noise interference tolerance due to digital nature of the signal. 2. With channel coding, error detection and correction at receiver is possible. ... consumption (Due to various stages of conversion). 3. Needs synchronization 4.Sampling Error.

Description : Explain Piezo-electric transducer with diagram. State its applications, advantages and disadvantages.

Answer : Explanation: Principle of operation: When a pressure or force or vibration applied to the crystalline material like quartz crystal or crystalline substances then an e.m.f. is generated across the ... destructive test (NDT) equipment's 4) Piezoelectric materials are use in ultrasonic transducers.

← Prev Question Next Question →
editAsk a Question
...