# Is vdr only applicable on series circuit

Is vdr only applicable on series circuit
Yes because in parallel circuit voltage remain same for all the loads

## Related

Description : The series and parallel resonance on L-C circuit differs in that?

Answer : The series and parallel resonance on L-C circuit differs in that series resistance needs a low-resistance source for sharp rise in current.

Description : In a 3-phase converter circuit during commutation when one SCR in one phase is turned on to turn-off an SCR in another phase, results in (A) voltage notching (B) harmonic distortion (C) voltage sag (D) voltage swell

Answer : In a 3-phase converter circuit during commutation when one SCR in one phase is turned on to turn-off an SCR in another phase, results in voltage notching

Description : The loop equation for a series RLC circuit gives

Answer : The loop equation for a series RLC circuit gives

Description : Source transformation Replace the circuit with voltage source in series with a single resistor

Answer : Source transformation Replace the circuit with voltage source in series with a single resistor

Answer : Req= (1/1200 +1/560 + 1/2.1)^-1        = 2.1 ohms RT= 2.1 + 7.8      = 9.9 ohms IT = V/R = 24/9.9                = 2.4 A Veq= R I =  2.1 2 ... 7.8         = 12.096 w                 = 44.928 w _________________________________________ By: Ellis-Junior Kamatjipose ellisjuniork90@gmail.com