what is open loop and close loop control system?

2 Answers

Open loop control system  is doesn't have feedback control  I. e input is given to output.
Closed loop control system  is having  feedback control  I. e., input is given to output  and output is regains to input to check an error while getting an accuracy.
Like 0 like Dislike 0 dislike
A) In open loop system the input is independent         of output but output is depends on input.

A-1. no feedback path in open loop s/m

   -2. less accuracy than close loop s/m.

Ex. Washing machine, Electric heater, fan etc

B) similarly for close loop system the output is dependent on input and also input is dependent on output value,

B-1  feedback path is provided in C.L system.

   -2. high bandwidth.

   -3. high accuracy.

Ex. Air conditioner ( AC ), rocket launcher, radar          system, etc
Like 0 like Dislike 0 dislike

Related questions

Description : What are the advantages of open loop control system?

Answer : Open loop control system are simple to design. Open loop control system are generally stable.

Description : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Answer : What will happen to the gain margin if the gain of the open loop system is doubled? A) Doubled B) Becomes half C) Is not affected D) Becomes one-fourth 

Description : What is an example of an open loop system?

Answer : Open loop system. Ex. Electric heater, washing machine, fan, electric switch, etc

Description : What are the disadvantages of Open loop control system?

Answer : Open loop control system are less reliable. In open loop control system Optimization is not possible. Open loop control system are less accurate.

Description : If the gain of the open loop system is doubled, the gain margin  (1) Is not affected (2) Gets doubled (3) Becomes half (4) Becomes one -forth

Answer : If the gain of the open loop system is doubled, the gain margin Becomes half

Description : What are some examples of a closed loop system?

Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

Description : The open loop control system is one in which _____.

Answer : the output is independent of output

Description : _____is an open loop control system.

Answer : Field controlled D.C. motor is an open loop control system.

Answer : In an open loop control system Output is independent of control input.

Description : What is the difference between a mesh and a loop?

Description : The loop equation for a series RLC circuit gives

Answer : The loop equation for a series RLC circuit gives

Description : (i) Bilateral Network (ii) Node (iii) Loop (iv) Branch

Answer : (i) Bilateral Network: If the characteristic of network (response or behavior) is independent of the direction of current through its elements in it, then the network is called as a bilateral network e. ... A part of an electric network which lies between two junctions or nodes is known as branch. 

Description : Write the application of the following antennas: 1) Rectangular antenna 2) Dish antenna 3) Horn antenna 4) Loop antenna 5) Yagi-Uda antenna. 

Answer : Applications:  1.Rectangular antenna  i)Used in Mobile and satellite communication ii)Used in Global Positioning System iii) Used for Radio Frequency Identification (RFID) iv) Radar  Dish ... antenna. 2. Yagi-Uda antenna is used in conditional Access System (CAS) at the decryptor.

Description : Explain how sinusoidal AC voltage is generated by using simple one loop generator.

Answer : An electric current produced by means of electrical machine is known as generator which converts mechanical energy into electrical energy. When conductor cuts the magnetic flux, emf induced in it. (Faraday' ... upon position of armature. The nature of emf is alternating as shown by the waveform. 

Description : Define- (i) Node (ii) Loop for a DC circuit

Answer : Ans: i) Node: A point or junction at which two or more elements of network are connected is called as node. ii) Loop: A closed path for flow of current in an electrical circuit is called loop.

Description : Explain the hysteresis loop of a magnetic material with neat diagram.

Answer : Hysteresis loop of magnetic material:  The circuit arrangement for plotting the hysteresis loop is shown in figure given below. The electromagnetic part consists of a coil wound on the iron ring ... one magnetic reversal is called hysteresis loop. Meaning of hysteresis is to lag behind.

Description :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be A) 3 B) 2 C) 4 D) 5 

Answer :  The number of loop equations required to completely analysing a network comprising of 8 independent branches and 6 nodes including the reference node shall be 3 

Description : Which waves are demodulated by Costas loop? A) VSB B) SSB C) MSK D) DSBSC 

Answer : Which waves are demodulated by Costas loop? A) VSB B) SSB C) MSK D) DSBSC 

Description : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be?

Answer : If the area of hysteresis loop of a material is large, the hysteresis loss in this material will be large.

Answer : Murray loop test can be used for location of both the ground fault and the short-circuit fault.

Description : Describe the difference between an open circuit and a short circuit.

Answer : Open circuit means the wire is cut meaning power will not flow and close circuit means wire is not cut and hence power will flow.Short circuit is the same as close circuit

Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W

Description : Explain the open delta (delta-delta) test on transformer.

Description : Why CT is never operated with an open secondary ?

Answer : CT secondary should never be kept open because it will cause saturation of the core to a high level and very high voltage will appear across the secondary which can breakdown the insulation. One terminal of PT secondary is always grounded to avoid capacitive induction and for human safety

Description : An open resistor, when checked with an ohm-meter reads?

Answer : An open resistor, when checked with an ohm-meter reads infinite.

Answer : It is required to measure the true open circuit e.m.f. of a battery. The best device is D.C. potentiometer.

Answer : Open circuited armature coil of a D.C. machine is identified by the scarring of the commutator segment to which open circuited coil is connected and indicated by a spark completely around the commutator.

Answer : If the field winding of an unloaded salient pole synchronous motor is open circuited, the motor will stop.

Description : During open circuit test of a transformer?

Answer : During open circuit test of a transformer primary is supplied rated voltage.

Description : Explain open emitter BJT drive circuit.

Answer : open emitter BJT drive circuit:

Description : In open loop system

Answer : In open loop system the control action is independent of the output.

Description : Difference between open loop and closed loop control system

Answer : Difference between open loop and closed loop control system : Sr No. Open loop control system Closed loop control system  1 Feedback doesn't exists Feedback exists 2 ... and hence costly 9 Highly affected by nonlinearities Reduced effect of non-linearity

Description :  Open loop control system is one in which the control action :  a) Depends on the input signal b) Is independent of the desired output c) Depends on system variables d) Depends on system size

Answer :  Open loop control system is one in which the control action : Is independent of the desired output

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system. 

Answer : In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.

Description : An automatic toaster is a ______ loop control system.

Answer : An automatic toaster is an open loop control system.

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

Description : In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the a) left of the point is odd b) left of the point is even . c) right of the pointis odd d) right of the point is even

Answer : In root locus plot, a point on the real axis lies on the locus, if the number of open loop poles plus zeros on real axis to the right of the pointis odd

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

Description : State any two commands for managing disk space and also state their use

Answer : There are primarily two commands that can be used for managing Disk space: 1. df 2. du 1. df - disk filesystem df command (short for disk filesystem) is used to show disk utilization ... the disk space used by files on a machine and crucial for disk space management on unix and linux systems.

Description : A system with gain margin close to unity or a phase margin close to zero is (a) conditionally stable (b) relatively stable (c) highly stable (d) highly oscillatory

Description : Explain Closed loop and Open loop system with sketch. 

Answer : Closed Loop System: [1] The name indicates that the closed loop control system has a loop that is closed as shown in figure. [2] A feedback device is used for this purpose. This makes ... system is generally used in point-to-point systems where the accuracy requirements are not critical. 

Description : Describe open loop and closed loop system.

Answer : Open loop and closed loop system: Open system: When the input is independent of the output, the system is called open- loop system. The control action is based on only some ... system is called closed- loop control system. The output is continuously measured and fed to the input. 

Description : A system has 14 poles and 2 zeros in its open -loop transfer function. The slope of its highest frequency asymptote in its magnitude plot is (a) - 40 dB/dec (b) - 240 dB/dec (c) + 40 dB/dec (d) + 240 dB/dec

Answer : A system has 14 poles and 2 zeros in its open -loop transfer function. The slope of its highest frequency asymptote in its magnitude plot is (a) - 40 dB/dec (b) - 240 dB/dec (c) + 40 dB/dec (d) + 240 dB/dec

Description : The sensitivity of a closed loop system to gain changes and load disturbances depends upon (a) forward gain (b) loop gain (c) frequency (d) all the above 

Description : An open-loop system is better than a closed-loop system in terms of   (a) Accuracy (b) Stability (c) Noise reduction (d) Sensitivity  

← Prev Question Next Question →
Ask a Question
Choose topic