What is Baud ?

2 Answers

It is the rate at which information is transferred in a communication channel. Named after Emile Baudot the inventor of Baudot code (Telegraphy).
thumb_up_alt 1 like thumb_down_alt 0 dislike
Baud is the signaling rate, or rate of state transitions, on a communications medium. One baud corresponds to one transition per second.
thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : What is the baud rate of the standard 10 Mbps Ethernet ? (A) 10 megabaud (B) 20 megabaud (C) 30 megabaud (D) 40 megabaud

Answer : (B) 20 megabaud

Description : The baud rate of a signal is 600 baud/second. If each signal unit carries 6 bits, then the bit rate of a signal is ................. (A) 3600 (B) 100 (C) 6/600 (D) None of the above

Answer : (A) 3600 

Description : An analog signal carries 4 bits in each signal unit. If 1000 signal units are sent per second, then baud rate and bit rate of the signal are ............... and .............. (A) 4000 bauds \ sec & ... (B) 2000 bauds \ sec & 1000 bps (C) 1000 bauds \ sec & 500 bps (D) 1000 bauds \ sec & 4000 bps

Answer : (D) 1000 bauds \ sec & 4000 bps Explanation: Bit rate is the number of bits per second. Baud rate is the number of signal units per second. Baud rate is less than or equal to the bit rate. Baud rate = 1000 bauds per second (baud/s) Bit rate = 1000 x 4 = 4000 bps

Description : An analog signal has a bit rate of 6000 bps and a baud rate of 2000 baud. How many data elements are carried by each signal element ? (A) 0.336 bits/baud (B) 3 bits/baud (C) 120,00,000 bits/baud (D) None of the above

Answer : (B) 3 bits/baud

Description : Processor’s speed of a computer is measured in (1) BPS (2) MIPS (3) Baud (4) Hertz

Answer : MIPS

Description : Define (i)Bit rate (ii)Baud rate

Answer : (i)Bit rate :- Bit rate is simply the number of bits transmitted during one second and is expressed in bits per second (bps). Mathematically bit rate is given by:- Rb =1 / Tb where Tb is time ... 1 / Ts Where, baud rate = symbol rate (symbols per second) and Ts = time interval of one symbol.

Description : What is a phase control thyristor?

Description : What is thyristor family?

Description : What is meant by firing angle of thyristor?

Answer : The point at which SCR is triggered is known as firings angle of thyristor.

Description : What is the use of a thyristor in a circuit?

Description : What is a reverse conducting thyristor?

Description : What is the function of a thyristor?

Description : What is the application of thyristor?

Description : What is the need for electrically isolated drive circuits?

Description : What are the fundamental requirements of gate drive ICs?

Description : What is the difference between beta and forced beta for BJT?

Description : What are the design constraints of transformer design?

Answer : Design constraints of transformer design: Core loss, flux density, copper loss and total power loss vs flux density these are the basic constraints in transformer design. Core loss: Flux density: Copper loss: Total power loss vs flux density:

Description : What are the disadvantages of the linear regulator? how are they overcome in the switching regulator? What is continuous and discontinuous mode switching regulator?

Answer : Disadvantages of the linear regulator: Linear regulator waste power in the form of heat. Linear regulator has very low efficiency. Linear regulator cannot be used for the step ... between continuous mode and discontinuous mode switching regulator.

Description : What are the desirable characteristics of ideal switch?

Answer : Desirable characteristics of the ideal switch: It is desirable to have power switches characteristics closer to ideal switch. The ideal switch should have the following characteristics. Zero resistance when ... . 100% efficiency. Able to control power flow with zero power dissipation.

Description : What is holding current and latching current in SCR? Draw the gate characteristics of an SCR and explain the characteristics. What are the different signals which can be used for turning on SCR by gate control? compare them.

Answer : (i) Holding Current: Holding current is defined as the minimum anode current required to maintain conducting SCR in the on-state.  (ii) Latching Current: Latching current is defined as the ... the on-state immediately after the SCR has been turned on and the gate signal has been removed.

Description : What is the meaning of RMS value?

Answer : RMS value means root mean square value. It is 0.707 times peak value of voltage or current. The ammeter and voltmeter records this rms value. RMS value for sine wave is more than average value. RMS ... same amount of heat as produce by AC when AC is flowing through the same resistance for same time.

Description : What is the ripple voltage?

Answer : Ripple voltage is the small variations in Dc voltage that remain after filtering in a power supply.

Description : What is the difference between forward and reverse bias?

Answer : Forward bias is a PN junction bias which allows current to flow through the junction. Forward bias decreases the resistance of the depletion layer. Reverse bias is a PN junction bias that allows only ... Positive polarity on the n-type material and negative polarity to the p-type material.

Description : What is the voltage of a red LED?

Answer : A red led requires 2v to light. LEDs requires different amounts of voltage ranging between 1.8 and 3.3 depending on the intensity and color of the Led.

Description : What would cause a diode to fail?

Answer : Supply voltage beyond its limit

Description : What is the use of Schottky diode?

Answer : Schottky diode are use in SMPS, Sample and hold circuits and voltage clamping etc.

Description : What is the use of laser diode?

Answer : laser diodes are use in telecommunication, rangefinders, barcode readers etc.

Description : What does a Shockley diode do?

Answer : It is diode have low forward voltage drop and very high switching action

Description : What is the use of SCR?

Answer : SCR are use in lamp dimming, power regulators, motor control, rectifications of high power AC, control of welding machines and also use as switch these are some uses of silicon controlled rectifier.

Description : What is the use of fast recovery diode?

Answer : Fast recovery diode are used in high frequency rectification. Fast recovery diode also used for freewheeling. Fast recovery diode also used for DC to DC converter.

Description : What is the use of Tunnel diode ?

Answer : Tunnel diode is use in frequency converters and detectors, ultra high speed switching, amplifiers, etc.

Description : what is firing angle?

Answer : Firing angle is time in electrical degrees from the instant the valve voltage is positive to the application of firing pulse to the valve (start of conduction). Also called delay angle.

Description : what are the disadvantages of thyristor?

Answer : Disadvantages of thyristor The silicon controlled rectifier (SCR) is unidirectional devices, so it can control power only in DC power during positive half cycle of AC supply. Thus only DC power is ... cycle. It cannot be used at higher frequencies. The gate current cannot be negative

Description : What is Capacitive coupling ?

Answer : Capacitive coupling is connecting a circuit to another circuit using a capacitor in order to allow only Ac signal to pass through from circuit1 to the other circuit.

Description : What is Cathode ray tube ?

Answer : Cathode ray tube (CRT) is a vacuum tube using cathode rays to generate a picture on a fluorescent screen. These cathode rays are in fact the electron beam deflected and modulated, which impinges on a ... tube used to display data in a visual form. Picture tube of a television or computer terminal.

Description : What is Coulomb's law ?

Answer : Coulomb's Law is the force of repulsion/ attraction between two like/unlike charges of electricity concentrated at two points in an isotropic medium is proportional to the product of their magnitudes and ... square of the distance between them and to the dielectric constant of the medium.

Description : What is depletion type MOSFET?..........

Answer : Depletion MOSFET: Depletion MOSFET is a MOSFET in which the channel already exists. If we apply a voltage between drain and source then the drain current will flow even if the gate to source ... in figure. The drain current will be reduced as the gate to source voltage made more negative.

Description : What is enhancement MOSFET?...............

Answer : Enhancement MOSFET: There are two types of MOSFET one is enhancement MOSFET and second is depletion MOSFET. In enhancement MOSFET channel is created by applying threshold voltage between gate and source ... mode. The enhancement MOSFET will not conduct if the gate to source voltage is zero.

Answer : It is semiconductor diode with a low forward voltage drop and very high switching action

Answer : rectifier is a device which converts AC voltage to pulsating DC voltage using one or more diode diode conducts only in unit direction that is forward bias condition practically it does not conduct ... types one is with using two diodes and Centre tap Transformer and another is bridge wave rectifier

Description : What is Voltage Source Inverter (VSI) ?

Answer : Voltage Source Inverter (VSI)  Inverter is device which converts Direct Current (DC) to Alternating Current (AC). There are two types of inverters one is Voltage source inverter ... VSI consist of two load terminals and three phase VSI consist of three load terminals.

Description : Draw the structural diagram of GTO. Explain briefly the switching behavior of GTO with the help of appropriate voltage and current waveform.

Answer : Gate Turn Off Thyristor (GTO) Conventional Thyristor can be turned on with gate terminal but can not turn off from gate terminal. But in case of Gate Turn Off Thyristor (GTO), we can turn it on and off ... subdivided as storage period (Ts), fall period (Tp) and tail period (Tt).

Description : what is Cuk converter and draw its waveforms.

Answer : Cuk converter: Cuk converter is the series combination of boost and the buck converter. The Cuk converter is the DC to DC converter whose output voltage is greater than or less the than the input ... controlling the switch duty cycle the output voltage can be controlled.

← Prev Question Next Question →
editAsk a Question