search
person

1 Answer

 
done_all
Categories of semiconductor components (Integrated circuit families)

•Integrated circuits are made from semiconductor material

•These are divided into three main categories

        

       A) Analog components

       B) Mixed signal components

       C) Digital components

       According to various applications they are further classified as

       1) Standard components

       2) Semicustom components

       3) Custom parts

Each main categories Analogue components, Mixed signal components, Digital signal components are classified into Standard components, Semicustom components, Custom parts .

 A) Analog components

      1) Standard components

      2) Semicustom components

      3) Custom parts

B) Mixed signal components

      1) Standard components

      2) Semicustom components

      3) Custom parts

C) Digital components

     1) Standard components

     2) Semicustom components

     3) Custom parts

1) Standard components

     First subcategory standard component this is design and made by manufactures and users can not change function in it these are manufactured in very large scale and made by different companies with same parameters.

 2) Semicustom components

      Second subcategory is semicustom components these are configured by manufacturers but some block of memory of the I c is changeable  these can be change once or unlimited times semicustom components include programmable gate array programmable read only memory and microcontrollers.

 3) Custom parts

      Third subcategory is the custom parts these can be made by using computer aided design (CAD).

A) Analog components

          Now the main category Analog components is type which consist of parameters like signals amplification oscillations etc. Common families include amplifiers, comparators, buffers, function generator etc.

B) Mixed signal components

     Mixed signal components parameter are the combination of analogue and digital parameters and made from analogue and digital components combination.

C) Digital components

     Digital components is type which consists of parameter like 1 or 0, high or low, plus or minus, true or false etc. common families include Transistor Transistor Logic (TTL), CMOS, MOSFET.
thumb_up_alt 0 like thumb_down_alt 0 dislike

Related questions

Description : A snubber circuit is connected to the power semiconductor device to reduce the (A) turn-on time (B) turn-off time (C) electrical stresses (D) thermal resistance

Answer : A snubber circuit is connected to the power semiconductor device to reduce the electrical stresses

Description : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : (A) higher temperature sensitivity (B) higher Poisson’s ratio (C) higher piezoresitive coefficient (D) higher magnetostrictive coefficient

Answer : The Semiconductor strain gauges typically have much higher gauge factors than those of metallic strain gauges, primarily due to : higher piezoresitive coefficient

Description : (i) Explain the process of diffusion in semiconductor material. (ii) Explain Hall effect.

Answer : (i) Diffusion: In a semi conductor bar a concentration gradient exist when either number of electrons or holes is greater in one region of a semi conductor as compared to other region. When ... to determine whether a semiconductor is N type or P type, and to find carrier concentration

Description : State any four materials used in fabrication of semiconductor device and describe its need.

Answer : For fabrication of semiconductor devices like transistors diode, solar cell etc. we have to make use of following types of materials  1. Substrate: o It is used for deposition of thin ... . o Metal cans and sealed glass containers satisfy the extreme requirements of space and military users.

Description : State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor. 

Answer : Crystals of Silicon and Germanium are doped using two types of dopants:  1. The impurities for obtaining n-type semiconductor from intrinsic semiconductor are pentavalent impurity; like Arsenic (As), Antimony ... semiconductor are trivalent impurity; like Indium (In), Boron (B), Aluminum (Al), etc.

Description : Which is a semiconductor: copper, silicon, or neon?

Answer : Copper is a metal. Silicon is a semiconductor. Neon is inert gas.

Description : Compare intrinsic and extrinsic semiconductor

Answer : Intrinsic semiconductor Extrinsic Semiconductor Pure form of semiconductor Impure form of semiconductor No. electrons and holes are equal  No. of electrons and holes are not equal Electrical ... e.g. Ge, Si semiconductor e.g. p-type or n-type semiconductor

Description : Why is an intrinsic semiconductor doped?

Answer : Intrinsic semiconductor is doped in order to increase conductivity of semiconductor. Doping increases majority charge carries either electrons or holes and majority charge carriers responsible for electric current. 

Description : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: A) Half the total number of electrons in the crystal B) Zero C) Half the number of atoms in the crystal D) Half the number of free electrons in the crystal

Answer : In a single crystal of an intrinsic semiconductor, the number of free carriers at the Fermi level at room temperature is: Zero 

Description : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because (A) Of drive in diffusion of dopants & carriers. (B) Band to band transition dominates impurity ionization. (C) Impurity ionization dominates band to band transition. (D) Band to band transition is balanced by impurity ionisation.

Answer : At very high temperatures, extrinsic semiconductor becomes intrinsic semiconductor because Impurity ionization dominates band to band transition.

Description : What are the number of valence electrons of atoms in semiconductor?

Answer : There are four valence electrons in the atom of a semiconductor.

Description : what is semiconductor ?

Answer : For simple understanding is that the semiconductor is a partially conductor and partially insulator which depends on the temperature of conductor.

Description : Following are the components of jet engine

Answer : Following are the components of jet engine: 1. Air intakes 2. Compressors 3. Combustors 4. Turbines 5. Afterburners (reheat) 6. Nozzle 7. Bypass duct 8. Shaft

Description : List the different components used in CD player.

Answer : CD mechanism CD pick up assembly Gear system Motors CD lens Display panel Front panel Servo systems.

Description : List and explain the components of a hydraulic system.

Answer : Components Hydraulic: Hydraulic pump- Supply fluid to the components in the system. Pressure in the system develops in reaction to the load. Hence, a pump rated for 5,000 ... mechanical components and need to be removed along with other contaminants.  Seals, fittings and connections.

Description : Describe the process of photo emission. State the application of photo emission in electronic components

Answer : Process of Photoemission:when light of appropriate frequency and intensity is incident upon a surface of certain materials,the energy of light is given to electrons to leave the surface of metal ... photo tubes are used in door openers,counters, position and temperature control and colour analysis 

Description : List out main components of Diesel power station. 

Answer : Main components of Diesel power station: 1) Diesel Engine 2) Engine Air intake system 3) Engine Fuel System 4) Engine Exhaust system 5) Engine cooling system 6) Engine Lubricating system 7) Engine Starting system 8) Diesel Engine Generator (Alternator) 

Description : List out main components of Reactors. 

Answer : List the main components of Reactors:  1. Core 2. Nuclear fuel (U235) 3. Moderator 4. Control Rod 5. Reflector 6. Reactor vessel 7. Shielding  

Description : What are the components of system bus? A) CPU Bus, Address Bus, Data Bus B) Memory, Control Unit, ALU C) Data Bus, Address Bus, Control Bus D) Register, PC, IR

Answer : What are the components of system bus? A) CPU Bus, Address Bus, Data Bus B) Memory, Control Unit, ALU C) Data Bus, Address Bus, Control Bus D) Register, PC, IR

Description : Which of the following are components of Central Processing Unit (CPU)?  (A) Arithmetic logic unit, Mouse  (B) Arithmetic logic unit, Control unit  (C) Arithmetic logic unit, Integrated Circuits  (D) Control Unit, Monitor

Answer : Which of the following are components of Central Processing Unit (CPU)?  (A) Arithmetic logic unit, Mouse  (B) Arithmetic logic unit, Control unit  (C) Arithmetic logic unit, Integrated Circuits  (D) Control Unit, Monitor

Description : The sequence components of current of a single-phase load connected to a 3-phase system are (A) equal positive and negative sequence components (B) equal positive, negative and zero sequence components (C) vector sum of sequence currents is zero (D) algebraic sum of sequence currents is zero

Answer : The sequence components of current of a single-phase load connected to a 3-phase system are equal positive, negative and zero sequence components

Description : Describe different RT level computational and sequential components used to design single function processors.

Answer : RT-level combinational components:- To reduce the complexity in digital logic, combinational components are used, which are more powerful than logic gates.  Such combinational ... during a clock edge. An asynchronous inputs value effects the circuit independent of the clock.

Description : What are the main components of a computer system?

Answer : CPU,monitor, keyboard and mouse

Description : What are the analog components?

Description : What are the components of a power system?

Answer : generator Traansformer Conductors Insulators

Description : A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Answer : ANSWER: X -- DIODE

Description : Which one among the following components can not be developed within an “integrated circuit”? (1) Diode (2) Triode (3) Transformer (4) Transistor

Answer : Transformer

Description :

Answer : Integrated circuit design for particular application is known as Application Specific Integrated Circuit ASIC. ASIC have smaller size, less power consumption and less cost .

Description : what is integrated circuit ?

Answer : The integrated circuit is the semiconductor chip which has lots of small size resistors, capacitors, and transistors. There are so many applications of the integrated circuit. The different Integrated circuit ... are two types of integrated circuit one is analog or linear and second is digital.

Description : In microcontrollers, I2C stands for A. Inter-Integrated Clock B. Initial-Integrated Clock C. Intel-Integrated Circuit D. Inter-Integrated Circuit

Answer : D. Inter-Integrated Circuit 

Description : The complete form of ‘IC’ in electronics is (1) Internal circuit (2) Independent circuit (3) Integrated circuit (4) Inbuilt circuit

Answer : Integrated circuit

Description : The structure of a multi -layered integrated circuit is determined by (a) Removing successive layers of the circuit. (b) The intensity of backscattered or secondary electrons is detected by first or second detector. (c) Surface of the integrated circuit is a flat layer of semiconductor substrate material having implanted doped areas, the surface is covered with a metallisation layer providing a Schottky barrier. (d) All 3 of above.

Description :

Answer : The p-type substrates in a conventional pn-junction isolated integrated circuit should be connected to: The most negative potential available in the circuit.

Description :

Answer : In integrated circuit electronics the basic universal gate is AND gate.

Description : list the product names which have Integrated circuit.

Answer : list of products which have Integrated circuit. Mobile phone Calculator Printers Scanners Radio devices ... etc. These are some products name which have integrated circuit.

Description : For fabricating cost effective high valued integrated resistors in IC, the method used is  A) Diffused resistor B) Epitaxial resistor C) Pinched resistor D) Thin film resistor

Description : Some highly refined semiconductor materials is  with indium, what will be the majority carrires

Description : n-type semiconductor can be made by adding ____ to intrinsic semiconductor (A) Boron (B) Arsenic (C) Carbon (D) Germanium

Answer : n-type semiconductor can be made by adding Arsenic to intrinsic semiconductor

Description : When the temperature of a doped semiconductor is increased, its conductivity  (1) Decreases (2) Increases (3) Does not change (4) Increases or decreases depending on whether it is p-type or n-type

Answer : When the temperature of a doped semiconductor is increased, its conductivity Increases.

Description : Which of the following semiconductor materials is (are) used for manufacturing solar cells?  (1) Gallium arsenide (2) Indium arsenide (3) Cadmium sulfide (4) All of these

Answer : All of these.

Description : For Gunn diodes, semiconductor material preferred is  (a) Silicon (b) Germanium (c) Gallium Arsenide (d) all of these

Description : When Aluminium is deposited directly upon N type semiconductor, the diode formed has the characteristic  A) Forward current due to minority carriers B) Small delay time from on to off C) Large storage time D) Higher break down voltage

Description : Semiconductor A has a higher band gap than semiconductor B. If both A and B have the same dimensions, the same number of electrons at a given temperature and the same electron and hole mobilities, then

Description :

Answer : In a P type semiconductor At room temperature the hole concentration equals the acceptor concentration

Description :

Answer : Avalanche break down in a semiconductor diode occurs when Reverse bias exceeds a certain value

Description : Do holes move in semiconductor?

Answer : Never,holes is just our assumption we say the vacancy of electrons is hole.hole are always remain just electrons move through it.means vacancy change in continuous manner.it look like hole are moving.

Description : The two basic components of a Thevenin equivalent ac circuit are the equivalent voltage source and the equivalent: A. Series impedance B. Series resistance C. Parallel impedance D. Parallel resistance

Answer : The two basic components of a Thevenin equivalent ac circuit are the equivalent voltage source and the equivalent: Series impedance

Description :

Answer : the main components of the circuit are as follows register capacitor an inductor and the supply voltage our current source.

Description :  The effect of phase error of local oscillator on spectral components in coherent detection of SSB Amplitude modulated signal is : a. The frequency of demodulated signals varies with fixed amplitude b. Amplitude of demodulated signals varies with fixed frequency c. Both amplitude & frequency vary d. The recovered signal has phase offset with fixed amplitude

← Prev Question Next Question →
editAsk a Question
...