The number of comparators required in a 3-bit comparator type analog to digital converter is

A) 2 B) 3 C) 7 D) 8

A) 2 B) 3 C) 7 D) 8

Welcome to AskOrAnswerMe.com , where you can ask questions and receive answers from other user. Feel free to ask any question. Help everyone by giving best answer to the questions.

11,557 questions

10,177 answers

190 comments

4,089 users

- The number of comparators required in a 4 bit comparator type ADC is
- A 4-bit R/2R digital-to-analog (DAC) converter has a reference of 5 volts. What is the analog output for the...
- In a weighted-resistor digital-to-analog converter with 8-bit input, if the resistance corresponding to the MSB
- Number of comparators required for an 8 bit flash ADC is:
- A digital voltmeter uses an A/D converter which needs a start pulse, uses an analog comparator and has a...
- In successive approximation converter input to the comparator is through
- Can we create a digital circuit that has as inputs the 3- bit digital words
- The output Y of a 2-bit comparator is logic 1 whenever the 2-bit input A is greater than the 2-bit input B.
- An eight bit digital data 10101100 is fed to an ADC. The reference voltage is +10V. The analog output voltage ...
- In D/A converter, the resolution required is 50mv and the total maximum input is 10v. The number of
- Compare analog instrument to digital instrument on the basis of accuracy, resolution, power required and portability.
- Describe block diagram of digital comparator and write truth table of 2 bit comparator.
- What is Analog to Digital Converter (ADC) ?
- Find out number of data lines required to interface 16 LEDs arrange in the 4 x 4 matrix form.
- Which is the fastest type of analogue to digital converter?
- Digital to Analog Converter (DAC)
- How many minimum number of NOR gates are required to realize a two-input X-OR gate?
- Number of control lines required for 16 to 1 multiplexer is
- Digital computers are more widely used as compared to analog computers, because they are
- A 12 bit counter type A/D converter uses a 1 MHz clock. If the full scale output is +10V, its resolution output is
- An 8 bit converter type A/D converter makes at least 8000conversions/sec. The clock frequency used is
- The minimum number of wattmeter(s) required to measure 3-phase, 3-wire balanced or unbalanced power is
- The number of insulator discs (each rated 11 kV) required in a suspension type insulator string
- A 12 bit counter type A/D converter uses a 1 MHz clock. Its maximum conversion time is
- Dual slope integration type Analog-to- Digital converters provide
- A four bit number is given as 0110. Its 2’s complement is
- The minimum number of wattmeter(s) required to measure 3-phase, 4-wire balanced or unbalanced power
- In a 5 bit weighted resistor D/A converters, the resistor value corresponding to LSB is 40 kΩ, and the resistor
- With the help of a neat circuit diagram explain the working principle of Digital to Analog converters.(DAC)
- The number of switching functions of 3 variables is
- A 4 bit counter is used to count from 0,1,2...n. Value of “n” is
- A separately excited dc motor is required to be controlled, from a 3-phase supply, for its operation in the first...
- The minimum number of NAND gates required to implement a XOR gate is ...
- In a single-phase full converter, the number of SCRs conducting during overlap is
- In a 3-phase converter circuit during commutation when one SCR in one phase is turned on to turn-off an SCR
- A six-bit alpha-numeric code is able to code?
- The percent resolution of an 8 -bit D/A converter is
- The resolution of a 12 bit D/A converter using a binary ladder is
- The conversion time of a 12 bit successive approximation A/D converter using a 1 MHz clock is
- For steam power plant having capacity 600 MW capacity a cooling tower is required to set up with condenser. Suggest the type of condenser and cooling tower with justification.
- A large dc motor is required to control the speed of the blower from a 3 -phase ac source. The suitable ac to ...
- In which type of AC to DC converter efficiency is higher :
- The number of loop equations required to completely analysing a network comprising of 8 independent
- A network has 10 nodes and 17 branches. The number of independent mesh equations required to solve the
- State working principle of analog to digital and digital to analog conversion.
- What is the required connection for an enhancement type N-MOSFET to function as a resistor?
- Which of the following voltage is used represent binary '1' in digital circuits .
- What is not true in the context of “Don’t Care Condition” in digital logic ?
- A minimum clearance of 6.3 m to ground is required for overhead lines when operating voltages are :
- How much resistan is required to limit the current from a 12v batery to 3.6na?

...